Double sided, 5,18m H, 1,20m arm, 500kg

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Leto izdelave: 2021, stanje: novo, Cantilever Racking, Double-Sided, 3.50m Height, 1.20m Arms, 500kg per Arm – NEW –: Price ex works including loading! 1 racking unit with 4 uprights: €2,899 (net)! Chedpoddmtcefx Ag Ejd Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can construct longer or shorter racking units (or by using different bay distances). The example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 3.50m high, hot-dip galvanized (IPE 160/80) - Each with 2 x 3 adjustable arms, 1.20m length, 500kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 3,500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with center of gravity at 600mm: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m - From bay width 1.50m upwards, a small surcharge applies to the listed price - Special dimensions (different bay distances) also available upon request, but with surcharge and longer lead time as these are custom-made If you do not specify a different bay width, the rack will be supplied with a bay width of 1.30m. In this configuration, a rack row with 4 uprights (3 bays) is approx. 4m long. Supplied with all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 83 kW (112,85 KM), skupna masa: 6.000 kg, skupna dolžina: 460.000 mm, skupna širina: 4.000 mm, skupna višina: 4.300 mm, Leto izdelave: 2024, obratovalne ure: 300 h, vrsta vhodnega toka: trifazni, Prodajamo popolnoma delujoče škarje za rezanje odpadkov/alligatorske škarje. Konec leta 2023 jih je generalno obnovil ATM. - Takoj pripravljene za uporabo - Brez potrebnih popravil - Priloženi so 4 podložni obroči Področja uporabe: - Rezanje Cu, Zn, Pb katod do debeline 25 mm - Rezanje avtomobilskih hladilnikov do višine 105 mm - Rezanje Al pločevine, profilov, palic, cevi do debeline 25 mm Cjdpfx Ajq Nmw Ieg Ejhd - Rezanje Cu, Al, Pb cevi do višine 105 mm - Rezanje nerjaveče pločevine do debeline 16 mm - Rezanje Fe profilnih cevi, pločevine, cevi, palic, ploskih želez Alligatorske škarje, škarje za odpad, katodne škarje, škarje, klešče, hidravlične škarje, škarje za pločevino, giljotinske škarje, škarje za katalizatorje, listne škarje, škarje za avtomobilske hladilnike, kabelske škarje, škarje za cevi

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights: €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also build longer or shorter racking units by omitting or adding uprights (or by using different bay widths), this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided upright frames approx. 5.18 m high, hot-dip galvanized - IPE 180 / 100 - Each with 2 × 3 adjustable arms, 1.20 m, load capacity 860 kg per arm - With bracing approx. 1.30 m - Double-sided uprights approx. 5180 mm high, hot-dip galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at load center 600 mm: 860 kg per arm / 2,600 kg per upright side - With longitudinal and diagonal bracing (bay width = 1.3 m, standard is 1.30 m) - Other standard bay widths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a bay width of 1.50 m, a minor surcharge applies to the listed price! - Special dimensions (different bay spacings) available on request, subject to surcharge and longer delivery time due to custom fabrication! - If no different bay spacing is specified, we supply the rack with a bay spacing of 1.30 m. - In this case, the total length for a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors. Chodeddmqyjpfx Ag Eed Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex location incl. loading! 1 racking unit with 4 upright frames €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Codsddmp Aopfx Ag Eehd Transport costs within Germany (excluding islands): €430 (net)! You can also create longer or shorter racking units by omitting or adding frames or by choosing different pitch spacing. The example with 4 frames is simply the most common configuration! Cantilever racking system, hot-dip galvanized, comprising: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 height-adjustable cantilever arms each Load capacity with load centre at 600mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg, arms made of IPE 100 With longitudinal and diagonal bracing, e = 1,300 mm (standard 1.30m). Unless otherwise specified, the rack is supplied with a 1.30m pitch. Other pitches possible, e.g., 1m, 1.25m, and, for a small surcharge, 1.50m or custom sizes! In the standard configuration, the length of a rack row with 4 uprights is approx. 4,000 mm. Shipped complete with all bolts and nuts, floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: generalkompletno obnovljen (rabljeno), Droblilnik za lesne odpadke in lubje ERJO. Popolnoma obnovljen. Vgrajeni novi noži in protinoži. Cedpfx Asl Sli Deg Eohd

Leto izdelave: 2021, stanje: novo, One racking unit with 4 uprights €2,120 (net, excl. VAT)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport price within Germany (excluding islands): €490 (net, excl. VAT)! Of course, by omitting or purchasing additional uprights, you can also build longer or shorter rack units (or by using different bay spacings); this example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided uprights approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each level with 3 height-adjustable arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright Chjdoddmqnspfx Ag Eod With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal bracing, bay width = 1300 mm (standard is 1.30 m). Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a small surcharge applies in addition to the stated price. Special dimensions (other bay spacings) are available upon request, but these also incur a surcharge and have a longer delivery time, since they are custom-manufactured! If you do not specify a different bay spacing, we will supply the rack with a 1.30 m bay spacing. In that case, the length of a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all screws and nuts (shipping within Germany by parcel service directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New equipment: Price ex location incl. loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the centre distances), this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4,160 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each level with 3 height-adjustable arms Load capacity with 600 mm load centre: 750 kg per arm / 2,250 kg per upright Chjdpsddmp Usfx Ag Ejd With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces, centre distance = 1,300 mm (standard is 1.30 m – unless specified otherwise, the rack will be supplied with 1.30 m centre distance). Other distances possible, e.g. 1.0 m, 1.25 m for a small surcharge, also 1.50 m or custom measurements! Standard delivery length for a 4-upright racking row is approx. 4,000 mm. Delivered complete with bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rezkalnik za les, ostanki žagovine LINDNER tip T 400/140-2 – po tehničnem pregledu – zelo dobro stanje – za tehnološke sekance TEHNIČNE SPECIFIKACIJE: širina vhoda: 400 mm višina vhoda: 140 mm premer rotorja: 450 mm dolžina rotorja: 400 mm moč glavnega motorja: 33 kW moč motorjev za podajanje: 2 x 1,5 kW število nožev: 2 kosa sito dimenzij: 60 mm x 90 mm podajalni valji v zelo dobrem stanju moč motorja podajalnika: 1,5 kW Codpfxjr Ak Rge Ag Eohd dolžina podajalnika: 4200 mm transportne mere (d/š/v): 430 / 240 / 150 cm teža: cca 2000 kg

Leto izdelave: 2017, stanje: novo, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Price ex works incl. loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, comprising: Chjdoddmtqepfx Ag Eed - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each with 2 x 3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Double-sided uprights approx. 3,500mm high, hot-dip galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright - With longitudinal and diagonal bracing, spacing = 1,300mm (standard is 1.30m). - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies! - Special dimensions (other column spacings) available on request; these incur a surcharge and have a longer delivery time as they are custom-made! - Unless otherwise specified, we supply the racking with a column spacing of 1.30m. For a rack row with 4 uprights (3 bays), total length is approx. 4m. - Supplied with all bolts and nuts (shipment within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 500kg per arm – New - : Price ex location incl. loading! 1 rack unit with 4 uprights €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, you can also build longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay spacing). This example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided racking upright, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Foot and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity at 600mm load center: 500 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg, arms IPE 80 With longitudinal and diagonal braces, bay spacing = 1,300 mm (standard = 1.30m). Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! Chsdpfx Agoddmpvs Eed A small surcharge applies for bay lengths from 1.50m upwards! Special sizes (other bay spacings) are also available on request, but are subject to a surcharge and have a longer delivery time as they must be custom-made! If you do not specify a different bay spacing, the rack will be delivered with 1.30m bay spacing. With 4 uprights (3 bays), the total length is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service, direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Stanje: zelo dobro (rabljeno), Prodam sušilnico za les s 3 in 3 komorami. V zelo dobrem stanju. Chsdpfx Agjy R Tdwj Eod

Leto izdelave: 2021, stanje: novo, The prices stated in this advertisement reflect the rates as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of raw steel is strained and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with a current quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW –: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Codpfoddmr Njx Ag Ejhd Transportation price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional uprights you can configure longer or shorter rack units (or adjust the axle spacing accordingly); this example with 4 uprights is just the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - Each with 2x3 adjustable arms, 1.20 m, load capacity 500kg per arm - With bracing approx. 1.30 m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms - Load capacity at load center 600 mm: 500 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, axle distance = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the quoted price! - Special dimensions (other axle spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be specially manufactured! - If you do not specify a different axle spacing, we deliver the rack with an axle spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors.