Dvostranski konzolni regal

Bartels L12

Leto izdelave: 2019, obratovalne ure: 4.525 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12, STROJ ZA LUŠČENJE IN RAVNANJE PALIC V KOMPLETU Oprema je v brezhibnem delovnem stanju in jo je mogoče preizkusiti pod napajanjem. Popolnoma prenovljena leta 2019 (popolnoma nova mehanika in elektronika). Delovno območje: Ø 20 – Ø 80 mm Dolžina palic: 2,5 – 6,0 m Obdelovalna toleranca: ISO h9 (možna tudi h8) Globina luščenja: do 3,5 mm, odvisno od vrste jekla Vrste jekla: ogljikovo jeklo, ležajno jeklo, vzmetno jeklo ipd. Hitrost podajanja: digitalno nastavljiva 0,5 – 12 m/min Število vrtljajev glave za luščenje: do 1700 min⁻¹ Rezila: dva kompleta po 4 nože z avtomatskim digitalnim pozicioniranjem (trikotni in dolgi noži) Avtomatska nalagalna miza s števcem palic Podajni valj z motoriziranim nastavljanjem višine Hsdpfx Aewqb Scobnjnr Vhodni tlačni valji – 4 vertikalni valji z invertnim DC motorjem Stroj za luščenje sestoji iz: - Sprednji vodilni sistem - Glava za luščenje s 4 noži - Zadnji vodilni sistem Voziček za izvlek palic Glavni motor in prenos Izhodni stiskalni valji – dvojni Odlagača miza z motoriziranim nastavljanjem višine Zbiralnik s števcem in avtomatskim prevzemom končanih palic Hidravlična enota – povsem nova Električna omarica – nova, z dvema moduloma.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Hjdpfx Abetqf Rzsnsnr Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, I am selling very good and fast swiss machine, Tornos AS14 year 1976, because of my retirement plans. Pick-up was remanufactured. Hsdpfxsnyiyaj Abnenr

Leto izdelave: 2024, stanje: novo, Voziček za prevoz in shranjevanje profilov v navpičnem položaju COMALL CARR 300 Q, nov Tehnične specifikacije: Hedpjf Nk H Hefx Abnsnr - 10 prekatov z delovno velikostjo 128 mm - Stične površine prevlečene z neopraskajočim in udarnoodpornim plastičnim materialom - 4 kolesa Ø 125 mm, od tega 2 z zavoro - Roke nastavljive v 5 različnih položajev - Podporna miza prevlečena z gumo - Nosilnost: 650 kg

Stanje: novo, as well as other types, as a package Hjdpof Ddzqefx Abnjnr

Stanje: rabljeno, Leto izdelave: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Rotational speed: 2800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting area, allowing simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the swivel mechanism * Safe clamping via dual-pressure system * Double guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° Hjdpfx Abotv Rgrjnsnr * Including extraction unit (without piping), ALKO Mobil-Jet 100, year of manufacture 2002

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Hnedpsdy Hm Djfx Abnsr Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: dober (rabljeno), Žerjavna naprava z dvema fiksnima tirnicama (d = 6.000 mm) in dvema gibljivima tirnicama (d = 6.000 mm). Maksimalna nosilnost na tirnico = 1.000 kg. Hjdpfsg Dgh Ijx Abnenr Montaža na strop (obešena, brez podpore). Napeljava električnega toka v profilu. Dovod stisnjenega zraka zunaj, preko zank. Možnost: dvižna naprava s palicami / ročni klešči za dvigovanje palic s palete in odlaganje palic na stojalo za palice.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance Hnjdpfx Aboh Ek Dajnsr - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Leto izdelave: 1999, stanje: rabljeno, Pribor za stružnico: da Pogonski držalo za orodje VDI 20 Količina: 3 kosi v paketu Hjdpfx Aohr Sv Tsbnonr +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega ni možen prikaz stroja pod napetostjo ali izdelava videoposnetka. Naš oglas vsebuje najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++