Brusilnik z dolgim trakom

Johansen T 85 PNEUMA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding. Iaedpfxsx D H Hcj Ablow

Stanje: rabljeno, Leto izdelave: 2001, Širina udarne stene: 4000 mm Višina udarne stene: 1000 mm Zunanje dimenzije: 4600 x 1500 mm 2 x 1,5 kW motorja Skupni nazivni volumenski pretok: 7000 m³/h Odsesovalni priključki levo in desno s premerom 300 mm Lokacija skladišča: Garbsen Iasdpjvvizkefx Abljw

Stanje: novo, Leto izdelave: 2026, Grinding of contoured materials using the side table Easy and quick abrasive belt replacement via a lever Movable unit enables operation in both horizontal and vertical positions Standard equipment includes an additional height-adjustable table Tensioning device ensures consistent abrasive belt tension Compact machine dimensions with a wide range of applications Technical data: Belt size [mm]: 2010 x 152 Worktable size [mm]: 790 x 221 Table height [mm]: 810 Stand height [mm]: 600 Auxiliary rounding table size [mm]: 514 x 221 Max. grinding length [mm]: 790 Iajdpfxovuggze Ablew Extraction nozzle diameter [mm]: 100 Face and edge grinding angle [°]: 0 - 45 Belt speed [m/min]: 840 Motor power [kW]: 1.1 Power supply [V]: 400 Weight [kg]: 75 The listed price is net. Transport not included.

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), Automatic slot mortiser with dual tables and oscillating spindles BALESTRINI 2CAP Maximum mortise length: 120 mm Maximum mortising depth: 80 mm Spindle speed: 9000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Pneumatic workpiece clamping Overall dimensions: 1000 x 900 x 1250 mm Iajdpogmucpofx Ablow Weight: 500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) Iajdpsmhhf Sofx Ablew - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: rabljeno, številka stroja/vozila: 008480, Delovno območje os X: 4600 mm Delovno območje os Y: 1550 mm Delovna površina: z vakuumskimi konzolami Iaodpfxsy Edqks Ablew Moč glavnega vretena: 18 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 31 Število mest za orodje: 58

Stanje: rabljeno, Leto izdelave: 1992, s Centrofix-skobelno gredjo Stroj očiščen, popolnoma pregledan Ijdpfx Aoxuv Rrjbloaw Mize izmerjene – zelo natančno nastavljene, max. 5/100 mm Preizkusno skobljanje Rabljeno, dobro stanje, malo rabljeno Proizvajalec Maka Tip AH 430 Leto izdelave 1992 Serijska št.: 9201531 GS-pregled za lesni prah Motor 3,0 kW Upravljalna plošča zgoraj Širina skobljanja cca 430 mm Dolžina prihodne mize cca 1500 mm Dolžina odvodne mize cca 1200 mm Nihajno varovalo Utori/utišane mizne letvice Število nožev: 4 kosi Centro Fix-noževna gred Nastavitev mize z ročnim kolesom Samodejna zavora Priključek za odsesavanje D 140 mm Potrebni prostor cca 2700 mm x 1200 mm x 1400 mm Teža cca 800 kg Skladišče 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Tip: Tempora 60.06, F600 Leto izdelave: 2019 Popolnoma avtomatsko upravljanje iz nadzorne plošče. Enota za spajanje: Da Enota za odrezovanje: Da Enota za rezkanje radijev: Da Rezilo za vlečenje radijev: Da Iaedpfexix Hxox Ablsw

Stanje: pripravljen za uporabo (rabljen), delovna širina 4 metre dvostopenjska filtracija: kartonski filter + podloga paint stop zgornji filter za kroženje zraka osvetlitev delovnega mesta moč ventilatorskega motorja 4 kW italijanska proizvodnja Električna plošča v zaščitnem razredu IP55 Stropna osvetlitev v zaščitnem razredu IP65 Nujni gumb (STOP) Izpustni lijak Iedpfxjw Rpxce Ableaw Nova

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 250 h, Wide-Belt Sander Bütfering Model: SWT 315/C Optimat Year of Manufacture: 2013 Working width: 1350 mm Feed speed: 2.5 – 13 m/min, adjustable via frequency inverter 1 Combination unit with steel contact roller offering three selectable options: Iaodjzb Ikxopfx Ablew - Infinitely variable, frequency-controlled cutting speed 2–18 m/s - Calibration sanding with profiled contact roller - Veneer and lacquer sanding - Electro-pneumatic segmented pressure beam with 25 mm segment divisions - Protected storage area on the machine for additional sanding inserts - Adjustable sanding belt air-blow cleaning device, 5-step adjustable for application-optimized cleaning results with low compressed air consumption Technical data: Working width: 1350 mm Abrasive belt width: 1350 mm – 1380 mm Belt change side: left Workpiece thicknesses: 3 – 160 mm Operating voltage: 400 V / 50 Hz Drive motors: Unit: 20 kW Total connected load: approx. 23 kW Extraction sockets: 1 x 180 mm diameter (unit) Extraction volume: approx. 1,830 m³/h BL 1 (1350 MM) BELT LENGTH 2150 MM Abrasive belt length: 2150 mm UPGRADE TO MPS 1 Segmented pressure beam configuration as electromagnetic segmented pressure beam 'MPS' with program-controlled, current-regulated adjustment of the sanding pressure for each individual sanding segment; equipped with 2 sensors per actuator, spaced at 25 mm intervals VAKIX 1/2 (1350 MM) INTEGRATED VACUUM (T3) High-performance fan for connection to pre-installed vacuum clamping device, 3 kW fan, connector diameter: 160 mm, extraction volume: 940 m³/h FBM (1350 MM) FINISH BRUSH Powered finish brush at the machine outfeed side, connector diameter: 140 mm, extraction volume: 1,100 m³/h ATA 2 (1350 MM) FOLDING SUPPORT TABLE Support table approx. 900 mm long with an integrated roller at the outfeed (foldable) Machine weight: 2,800 kg