Suha lakirna stena, kabina

FENICE ŚCIANA LAKIERNICZA /SUCHA KABINA

Stanje: novo, Leto izdelave: 2026, - Capacity: 1.2 mm - Working width: 250 mm Ncedogg Nrkjpfx Agxsr - Supplied with 8 sets of rollers

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit Ncodpfx Agjd H Rf Tjxor + €850 for models equipped with a fire extinguisher (Safe System)

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black Nsdpfx Aeiiv Iksgxjcr 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Njdpevxwkfefx Agxjcr Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg Nodeqt Dmyepfx Agxjcr - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: max. length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion tool (positioned 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue quantity - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimension: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feeding 1. BASE MACHINE - Sturdy steel frame construction - Axis movement in X, Y, and Z directions - Ball screw (Y and Z axis) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manual actuation via selector switch - 6 top hold-down cylinders, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC Nodpfxoxdl Raj Agxocr

Stanje: rabljeno, Leto izdelave: 2017, vrsta goriva: dizel, Oprema: kabina, * Inquiries welcome via WhatsApp * Linde H 80-3/900 * Diesel * EVO * 8000 kg rated load capacity * 14055 kg gross weight Nodpfx Ajn E Sxgsgxscr * 3rd and 4th hydraulic control circuit * Air conditioning * Road lighting * Work lighting * Beacon light * Reversing camera * Tires 8.25-R15 * 315/70R25 * German vehicle * One owner * Multi-pallet fork available at extra charge * Net sales within the EU only possible with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), * Sale to businesses only, * Port transport possible, * This offer is non-binding and subject to prior sale and changes. Errors and interim sale excepted. No liability for input errors. Viewings by appointment only, WhatsApp

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, številka stroja/vozila: NOH366, ABUS ELV žerjavna steza, mostni žerjav, halni žerjav, žerjav Žerjav je na voljo 3x v enaki izvedbi! Nosilnost / dvižna kapaciteta 5t - 5000 kg Tirnica 14.260 mm, zunanja mera cca 14.500 mm Leto izdelave 2003 z brezžičnim upravljanjem in talnim rezervnim upravljanjem Dvižna višina 6m Gradbena višina zgornji rob žerjava do kljuke cca 900 mm Dolžina glavnega nosilca z blažilnikom cca 280 cm Dodatni podatki sledijo Žerjav je razstavljen in takoj na voljo Zelo dobro stanje, preizkusna knjiga je na voljo Na voljo so tudi stebrni in stenski vrtljivi žerjavi Demag KBK in Abus HB sistemi ter Errikla, Hadef, Stahl KT 2000 itd. Dostava po prevozniku je možna, prosimo povprašajte glede na poštno številko Prevzem osebno je zaželen Nodpfx Agextyvpsxjcr

Stanje: novo, Leto izdelave: 2023, stiskalna sila: 120 t, skupna dolžina: 3.000 mm, skupna širina: 1.300 mm, obratovalna temperatura: 120 °C, premer cilindra: 85 mm, širina odpiranja: 400 mm,

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice Ncodpfx Asd Iipxjgxsr - Heavy-duty, large material support - Automatic coolant system