Brusilnik z dolgim trakom

Samco EG

Stanje: rabljeno, Leto izdelave: 2006, incl. 2nd sanding shoe Used machine, top specification Fpodpevwffbjfx Ap Esk Manufacturer: SCM Samco Model: EG 2500 Year of manufacture: 2006 Machine no.: AM/28506 Motor: 3.0 / 2.2 kW Sanding length: approx. 2500 mm Sanding width: approx. 1000 mm Abrasive belt length: approx. 6800 mm Table size: approx. 2500 mm x 1000 mm Throat (right): approx. 700 mm Throat (left): approx. 700 mm Electrically adjustable Upper belt cover Upper sanding support Belt speeds: 1400 / 2800 rpm = 23 m/sec / 46 m/sec Right/left belt run Extraction port diameter: 160 mm Required space: approx. 3900 mm x 1700 mm x 1500 mm Total connected load: approx. 4.55 kW Location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in existing condition, without any warranty or guarantee.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.000 mm, skupna širina: 3.500 mm, skupna višina: 2.950 mm, notranja višina: 2.650 mm, notranja dolžina: 4.900 mm, notranja širina: 3.400 mm, Oprema: kabina, Vehicle Spray Booth The vehicle spray booth is a fundamental piece of equipment for paint repair technology. It allows paintwork to be carried out under safe and comfortable conditions while minimizing negative impacts on both the surrounding area and the environment. Technical specifications: - External dimensions: 5000 (+ air supply unit 1350 × 2900 mm) × 3500 × 2950 mm - Drive-through gate: 3000 × 2600 mm (triple-winged) - Service door: 700 × 2000 mm - Structure: made from steel sheet - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Booth wall structure: - Thickness: 50 mm - Filling: EPS polystyrene - Colour: white Booth floor: - Booth mounted directly on floor / concrete slab Double ceiling: - Outer ceiling panel - Full-length plenum above the ceiling area for supply air Fjdpfxjxnpcze Ap Eepk Air exchange system: - Supply air system: - Jet turbine 4 kW – 2 units - Air capacity: 26,000 m³/h - Exhaust air system: - Jet turbine 5.5 kW – 1 unit - Air capacity: 18,000 m³/h Lighting: - 8 side lamps - Ceiling lighting: 24 LED fluorescent tubes Air heating system: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heat-up time: 8–15 minutes Filtration system: - Double-layer filter structure - High-performance air purification system with up to 99% filter efficiency

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND MORTISE BORING MACHINE Completely in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3–26 mm. Including collets Ø 10 / 13 / 16 / 20 mm - Motor 1.5 kW, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm increments, featuring: - Central detent and transverse adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system, consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be repositioned from left to right) 2 flip stops - Lowerable mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, diameter 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swiveling (left and right) Drilling head mount Fedpfxjxdttio Ap Eopk 3-spindle drilling head, 32 mm pitch (can be rotated 90°) Undercarriage with 4 wheels for easy movement of the machine Availability: Short term – immediately –

Stanje: rabljeno, incl. various slot and tenon discs used, good condition Manufacturer: Festo Type: ZA 101 Fjdovwffzepfx Ap Espk Machine No.: 2668/S Number of spindles: 3 + cross-cut saw Clamping height: 1 x 140 mm + 2 x 30 mm Cross-cut saw: 2.5 HP Stop ruler LAS 1750 mm + 1000 mm with turret stop Workpiece clamping: pneumatic Space requirements: approx. 1700 mm x 700 mm x 1400 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-is condition, as inspected without warranty or guarantee

Leto izdelave: 2023, stanje: novo, For sale: WLO 25 kW hot air furnace, workshop stove, wood stove, hall heater Technical specifications of the stove • Rated heating output: 25.00 kW • Maximum heating output: 30.00 kW / approx. 300 m² • Included: forced axial fan, speed: 1400 rpm, capacity: 3110 m³/h • Included in set: driver • Innovative air jacket design completely surrounds the unit for maximum efficiency • Indestructible furnace made entirely from P265GH and 16Mo6 certified boiler plates, thicknesses #6mm and #10mm • Large exhaust deflector reduces fuel consumption by up to 30% • Energy efficiency class: A • Energy efficiency index: 110 • Net weight: 230 kg • Gross weight: 240 kg • Furnace lining: 15 chamotte bricks • Two removable large cast iron grates 300 x 200 mm • Coated with certified heat-resistant paint for corrosion protection and an aesthetic appearance • Heavy-duty construction • Large combustion chamber • Large loading door • User manual • Efficiency: 75% • CO emission at 13% O₂: 1.20m • Fuel type: recommended dry hardwood with a moisture content ≤20% * mg/Nm³; briquettes, coal permissible as admixture up to 10% Fpedpfxsixupms Ap Ejk Safety and certifications • CE marking: YES / on type plate • Compliance with standard: EN13240:2006 • BImSchV Stage 2: Yes Dimensions • External dimensions: Total width: 485 mm x total depth: 900 mm x total height: 1310 mm • Hearth dimensions: Width: 390 mm x depth: 460 mm x height: 540 mm • Upper door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 230 mm • Middle door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 155 mm • Lower door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 150 mm • Upper loading opening: Width: 310 mm x height: 210 mm • Middle/bottom loading opening: Width: 310 mm x height: 130 mm • Cast iron grate dimensions: Width: 210 mm x depth: 300 mm • Hot air outlet diameter: Ø 150 mm • Exhaust outlet diameter: Ø 130 mm • Leg height: 140 mm Technical specifications of the fan • Fan type: Axial blower • Material: Steel (propeller + housing) • Diameter: Ø 350 mm • Power supply: 230V / 50Hz • Motor: 4P • Current consumption: 0.58 A • Speed: 1400 rpm • Airflow: 3110 m³/h • Safety: CE mark + protection grid

Stanje: novo, Vertical band saw Brand: METALLKRAFT Model: VMBS 1610 Item no.: 3951610 Fpodpfehy Tcqsx Ap Eek Condition: New machine Cutting speed: 20 - 1000 m/min Accessories: - Band welding unit with shears and grinding motor - Machine lamp - 2-speed gearbox, continuously adjustable - Chip blower device - Parallel fence - Operating manual

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 1.833 h, Nadgradnja: kabina za voznika s popolnim pogledom in ogrevanjem, poravnalni ščit 990/1240x230 mm, širina gosenic pribl. 230 mm, nastavljiva širina osi, 2 dodatna hidravlična priključka, žlica za bager 400 mm z zobmi, največja vlečna sila 32,3 kN, doseg pribl. 3,5 m. Kubota trivaljni dizelski motor D 782, 778 ccm, 9,6 kW, 2 hitrosti vožnje 2,1-3,8 km/h. Prikazani delovni čas: 1.833 h. Fsdpfxsy Dwlls Ap Eepk Prodaja samo pravnim osebam. PRI IZVOZU JE ZA PLAČILO SAMO NETO CENA!!!!! VSI PODATKI BREZ GARANCIJE, POSEBEJ GLEDE OPREME IN PRIBORA. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte Impresum).

Stanje: novo, Anzahl der Räder (Stk): 4 Raddurchmesser: 120 mm Radbreite: 60 mm Vorschubgeschwindigkeit: 3,5 / 5 / 7 / 10 / 12,5 / 16 / 25 / 32 m/min Motorleistung: 750 W / 550 W Fodedmk Ekopfx Ap Espk Maschinenrahmen: Aluminiumguss Vorschubrichtung: Vorwärts / Rückwärts

Stanje: rabljeno, širina skobljanja: 630 mm, skupna širina: 1.100 mm, skupna višina: 1.300 mm, skupna masa: 1.200 kg, skupna dolžina: 1.200 mm, višina skobljanja: 200 mm, potrebna višina: 1.300 mm, zahteva za prostor dolžina: 1.200 mm, potrebna širina: 1.100 mm, Nr. 3249 Thickness Planer Hombak D 63 Used Planing width: 630 mm Maximum planing height: 200 mm 2-knife cutterhead Anti-kickback devices Serrated infeed roller Smooth outfeed roller 2 feed speeds: 9 / 18 m/min 2 height-adjustable rollers in the thicknessing table Knife setting gauge by Panhans Transport dimensions approx. 1200 x 1100 x 1300 mm (LxWxH) Weight approx. 1200 kg Sale on behalf of a customer, ex location near 73430 Aalen, without dismantling, transport or assembly included Dismantling, loading, and transport by us available as an option Description and price subject to error. To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as seen / in current condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the principle "bought as seen" applies. Pictures and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Prices plus VAT, payment prior to collection or dispatch Fpodex Ilzvopfx Ap Esk Delivery terms: ex location

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Johannsen tračni brusilni stroj T 82 - K Pneuma - Brusna blazina z zračno podporo - Maks. dolžina obdelovanca: 2800 mm - Širina mize: 950 mm - Glavni motor: 5,5 kW - Motor ventilatorja: 2,2 kW - Širina brusilnega traku: 160 mm - Premer priključka za odsesavanje: 180 mm - Desni/levi tek Fpjdpfx Apexpmtys Eok - Nastavljanje z ročnim kolesom - Skupne mere (D/Š/V): 4080x1800x1400 mm - Masa pribl. 1000 kg Lokacija: iz lokacije v Saarlandu - takoj na voljo -