Brusilnik z dolgim trakom

Johannsen T82-K Pneuma

Leto izdelave: 1988, stanje: dober (rabljeno), številka stroja/vozila: D 05103, Ref. No. 13439 Technical Data: Hnodpfek D Ewgex Ag Aou - Polishing disc/grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions approx. 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Required space approx.: W 1100 x H 2450 x D 800 mm - Weight approx.: 300 kg

Stanje: dober (rabljeno), Leto izdelave: 2017, - Nagib vretena rezkalnika: 90 stopinj / 45 stopinj Hodpfxoy Tm Rps Ag Aonu - Rezervno rezkalno vreteno: vključeno

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm Hnedpfx Agehfufgo Aeu -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-14, lastna masa: 627 kg, največja dovoljena obremenitev: 2.073 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K1 306 170 2700 2 Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading height: 66cm Gross weight: 2700kg Payload: 2073kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350kg axles with brakes Low-chassis design Fully welded, hot-dip galvanised steel frame Aluminium profile side walls with tension locks Drop and removable on all sides 15mm thick, non-slip, heavy-duty phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg static load 6 noise-dampening lashing rings with 800kg tensile strength Reinforced 13" C-type tyres with steel valves M+S tyres Net/rope hooks on frame 13-pin plug Front LED marker lights Rear lights with reverse light, fog light, and triangular reflector Top frame mounted on rubber bushings Large rear tilting angle of 51 degrees Hand pump with adjustable handle OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - Equipment for 100km/h speed rating (shock absorbers) - Spare wheel with holder - Without side walls (discount available) - Side wall height increase to 35cm - Black Edition (powder-coated side walls and rims in black) - Integrated loading ramps, 2800kg capacity - Electric tipping mechanism - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric mechanism - Safety support for maintenance work with tilted body - Folding crank rear supports - Full LED lighting - Anti-theft device - Fine- or coarse-mesh net - H-frame - Mesh sides in various heights, also available fully enclosed - Extension side walls, 30cm, with tension locks - Flat tarpaulin with or without bows - High tarpaulin, 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle documents €200 net Images are for illustration purposes and may show optional, extra-cost accessories. Haven't found the right trailer yet? We stock 50-100 vehicles, always ready for immediate pickup. The workshop is open weekdays from 8:00 to 17:00 for all kinds of repairs. Axle repair specialist – also for caravans. Hnedpoghpcasfx Ag Aou Large selection of rental trailers. Additionally, we offer a large range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Stanje: delavnici obnovljeno (rabljeno), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Table height adjustment: mechanical Right and left rotation 2 abrasive belt speeds Abrasive belt cover on top CE compliant Includes special grinding shoe Hedpfx Asv D H Sisg Aonu Note on used machines: • Technical specifications may contain errors; subject to prior sale. • The indicated prices are ex-works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. The buyer is welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2006, Krožna žaga za obdelavo robov Proizvajalec: Altendorf Tip: F45 Letnik proizvodnje: 2006 Tehnični podatki Premer žaginega lista: maks. 500 mm Moč glavnega motorja: 5,5 kW Moč predrezalnega motorja: 0,75 kW Opomba: Tehnični podatki in opisi so kopije prvotne potrditve naročila. Podani podatki so namenjeni samo informacijskim namenom in niso zavezujoči. Hedpfxjz E Rnqe Ag Ajnu

Stanje: dober (rabljeno), Riello RLS50 oil and gas burner, 581 kW, approx. 15 kg/h Hodopiqiajpfx Ag Aonu

Stanje: zelo dobro (rabljeno), Stainless steel construction, Length: 1400 mm Hedpohvyzwofx Ag Aonu Width: 1200 mm Height: 1900 mm Weight: approx. 250 kg

Stanje: novo, DEMONSTRACIJSKI STROJ Hsdpfxjvy Ufvj Ag Aenu Naprodaj je skoraj nov, blokovni tračni žagi z dolžino reza 3.700 mm. Demonstracijski stroj je v originalnem stanju, zato imate polno garancijo. - Največji premer debla: 550 mm - Največja širina desk: 530 mm - Največja dolžina reza: 3.700 mm (3,7 metra), razširljivo! - Najmanjša dolžina reza: 900 mm (0,9 metra) - Gib tračne žage min./maks.: 20/540 mm - Največja globina reza: 220 mm - Premer/širina kolesa: 400/25 mm - Moč motorja: 5,5 kW (4,0 kW S1/100 %) - Moč motorja za nastavljanje višine: 0,12 kW - Dolžina tračne žage: 3.200 mm - Hitrost tračne žage: 15 m/s - Skupna dolžina osnovne različice: 4.600 mm (4,6 metra) - Teža: približno 350 kg Stroj se nahaja v A-5431 Kuchl in si ga lahko ogledate kadar koli med našim odpiralnim časom. Pridržujemo si pravico do medprodaje! Povezani izrazi: obdelovalni stroj za žaganje, blokovni tračni žag, tračni žag, stroj Referenca: R-A0117

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" Hnodpfjtwb U Asx Ag Aou The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.