Roki Ostalo nakup rabljenega (555)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Tauberbischofsheim
555 km
Brušenje Ostalo
Langbein
Pokliči
Stanje: rabljeno, Število brusilnih enot: 2 kos
Hjdpfx Ajlfdxmeb Ejfd
Brusna širina cca 450 mm
Premer vretena: 45/35 mm
Dvostranski brusilnik z dolgimi nogami s levim/desnim tekom za obdelavo lesa.
Mali oglas
Dorsten
848 km
Dodatki/Ostalo
Bandagen Trelleborg500 370 100
Pokliči
Stanje: rabljeno, Pogon . kW
Kapaciteta pretoka . kg/h
Material .
8 kosov
Za manipulator A5.1
Tehnične podatke navaja proizvajalec oziroma operater, zato so za nas nezavezujoče. Pridružujemo si pravico do vmesne prodaje; izključno veljajo naši splošni pogoji poslovanja in prodaje.
O nas
več kot 400 lastnih strojev na zalogi
več kot 15.000 m² skladiščnega prostora, kapaciteta žerjava 70 t
več kot 10.000 artiklov dodatne opreme za vašo delavnico
Če želite prodati stroje, proizvodne linije ali vašo dejavnost, nas kontaktirajte.
Dodatne ponudbe najdete na naši spletni strani.
Ogledi so mogoči po dogovoru.
Hedjyqvm Tspfx Ab Eofd
Veselimo se vašega obiska.
Vaša ekipa Markus Hirsch
Mali oglas
Einbeck
733 km
Žagaška stroj, ostalo
Pokliči
Stanje: rabljeno, Premer debla: maks. pribl. 45 cm
Podajanje: maks. pribl. 70 m/min
Centrično vodenje debel za poravnavo debel s 4 valji pred rezanjem v žagarskih obratih.
Hfsdpexyw D Refx Ab Eed

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Einbeck
733 km
Žagaška stroj, ostalo
Pokliči
Stanje: rabljeno, Premer debla: maks. cca 45 cm
Hfsdpfexyw Dkjx Ab Ejd
Pomik: maks. cca 70 m/min
Centriranje debla za poravnavo debel z 6 valji pred razrezom v žagarskih obratih.
Mali oglas
Babberich
908 km
CNC stružnica Ø 1135 x 2000 mm
ProKingLC450
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2013, Manufacturer: Pro King
Model: LC 450
Control: Fanuc Oi-TF
Year of manufacture: 2013
Specifications
Metric US Standard
Max. turning diameter: 1135 mm
X-axis travel: 560 mm
Z-axis travel: 2000 mm
Spindle bore: 153 mm
Spindle speed: 700 rpm
Spindle power: 37 kW
Tool changer: 12 stations
Chip conveyor: Yes
Quill taper: 6 Mk
Quill diameter: 235 mm
Hfodpfotwlm Nex Ab Eed
Dimensions (approximate)
Length: 6500 mm
Width: 3200 mm
Height: 2900 mm
Weight: 15,000 kg
Please note: The information provided on this page is given to the best of our knowledge and, where possible, sourced from the manufacturer. The details are provided in good faith, but accuracy cannot be guaranteed. Therefore, this information does not constitute representations or contractual terms. We recommend verifying all critical details independently.
Mali oglas
Hohenthann
355 km
Nakladalec na kolesih
KingwayRadlader FARMER 811 PRO Kingway
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 26,48 kW (36,00 KM), barva: rdeča, skupna masa: 2.800 kg, Leto izdelave: 2024, obratovalne ure: 1 h, Oprema: 4-v-1 lopata, kabina, pogon na vsa štiri kolesa, vilice za palete, We deliver machines to every European country!
The FARMER 811 PRO wheel loader is one of our most popular models. We have been selling this machine for 10 years, meaning that hundreds of satisfied customers are already using it. Equipped with a 4-cylinder, 36 HP engine and a 2-speed transmission, it is a reliable machine for any industry. Its solid and robust construction allows operation under all conditions.
TECHNICAL SPECIFICATIONS:
- Manufacturer: KINGWAY DEUTSCHLAND e. K.
- Model: 811 PRO
- Enclosed cab with heating, ventilation, road and work lights, reversing camera, radio
- Hydraulic quick coupler
- Suspension seat
ENGINE DATA:
- Engine: Yunnei DEF20NJF4 – Diesel
- Cylinders: 4
- Emissions standard: Euro 5
- Max. engine power: 18.2/25 kW / 25/36 HP at 2800 rpm
- Max. torque: 66.9 Nm at 1600 rpm
- Cooling system: Water-cooled
- Noise level: 101 dB
- Power supply: 12V
- Battery: 12V / 120 Ah
DRIVETRAIN:
- Drive unit: torque converter (2-speed)
- 4x4 drive
- Travel speed (gear 1): 0-8 km/h
- Travel speed (gear 2): 8-20 km/h
CAPACITIES AND PRESSURES:
- Fuel tank capacity: 40 liters
- Hydraulic oil tank capacity: 55 liters
- Max. hydraulic oil flow: 48 L/min
- Max. hydraulic oil pressure: 180 bar
WEIGHT INFORMATION:
- Operating weight: 2,800 kg
- Max. tipping load: 1,800 kg
- Max. lifting capacity (at attachment point): 1,000 kg
DIMENSIONS:
- Steering angle: 42°
- Turning radius (inner/outer): 2,350 mm / 4,200 mm
- Lifting height (lower edge of standard bucket): 2,580 mm
Hsdpfx Abevz U Sxe Eofd
- Dumping height (with standard bucket): 2,080 mm
- Dumping angle: 39°
- Standard bucket: 0.5 m³ loading volume
- Overall length: 4,650 mm
- Overall width: 1,600 mm
- Overall height: 2,450 mm
- Track width: 1,270 mm
- Wheelbase: 2,140 mm
TYRES:
- Standard: 31x15.5-15 agricultural tread
- Optional: 10-16.5 industrial tread
FEATURES:
- High-quality and robust construction
- Euro attachment (standard)
- Cabin, tank, and engine hood lockable
- Heating/ventilation
- Reversing camera
- Spacious comfort cab
- Easy to operate
- Highly maneuverable
- Compact and versatile
- Lighting system / Road lights
- Hydraulic quick-change system
- Third hydraulic circuit for attachments
- CE certified according to the latest standards and directives
- Sale WITHOUT VAT possible (only with VAT ID number)
- FINANCING available
SCOPE OF DELIVERY:
- FREE delivery within a 200 km radius
- FARMER 811 wheel loader / yard loader
- incl. bucket + forks (4-in-1 bucket available on request)
- Hydraulic quick coupler
- Joystick control
- 4x4 all-wheel drive
- EURO ATTACHMENT
- ROAD APPROVAL
- Float position
- Operating permit for Germany
With every loader, you can also order:
- Trailer hitch
- Additional counterweights
- Any available accessories such as push blades, crocodile grab, snow plow, high-capacity buckets, sweeper, grab bucket
PRICE:
€17,800 net
€21,182 gross
WARRANTY:
- Every machine comes with a 12-month warranty, extendable by another year.
- After the warranty period, we guarantee access to all spare parts for our customers.
SERVICE:
- We provide our own mobile service that reaches all our customers in Germany as well as abroad.
Mali oglas
Nemčija
650 km
Stroj za obdelavo koncev
Sabal/USMS60 ORO-KITHGS/320/DVSK-RC
Pokliči
Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Na voljo so tri stroji za obdelavo pet. 1) Stroj za vijačenje in lepljenje pet Sabal S60 ORO/KITHGS, letnik: 2014, proizvodna zmogljivost: cca 1400 parov/8h, poraba zraka: 22 l/cikel, dimenzije stroja D/Š/V: cca 800mm/700mm/1950mm, teža: cca 400kg. 2) Stroj za vijačenje in žebljanje pet Sabal 320, letnik: 2008. 3) Stiskalnica za podplate čevljev USM DVSK-RC. Možen je ogled na lokaciji.
Hodpfx Abexnp Rfe Esfd
Mali oglas
Hawksworth Trading Estate
1.365 km
Upogibni stroj
BAYKALPBS 1250-40 HYDRAULIC DOWNSTROKING CNC P
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 13 h, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: ESA, Oprema: evropski sistem vpenjanja orodij, spodnje orodje, varnostna svetlobna zapora, zgornje orodje, UPOGIBNA MOČ 40 t
CNC KRMILNIK ESA
ŠTEVILO OSI 4
UR 13
dolžina upogiba 1250 mm
pomik osi X 1000 mm
kapaciteta olja 80 litrov
moč motorja 7,7 kW
hod 215
višina odpiranja 455
globina grla 410
višina mize 800
širina mize 60
dolžina 2075
širina 1700
Hfsdpoyb R I Hefx Ab Eod
višina 2300
teža 3300 kg
Z 2x zadrževalnima prstoma, ročno nastavljivima (osi R+Z)
1x razdeljen set koničastih orodij – zgoraj
1x vrtljiv Multi-V blok matric
VARNOST
Stranska varnostna naprava (krilna vrata)
FIESSLER laserska varnostna naprava
Zadnja varnostna naprava (krilna vrata)
1x daljinsko dvojno nožno stikalo
2x sprednji podporni roki
Navodila za uporabo VKLJUČENA
Mali oglas
Nemčija
394 km
Brusilnik s širokim pasom
BütferingAWS Combi 1350
Pokliči
Stanje: rabljeno, Leto izdelave: 1983, Used machine
Year of manufacture: 1983
Condition: fully inspected and serviced,
including new feed belt
Features and Technical Data:
- Includes combination unit with contact roller and sanding pad
- With height-adjustable contact roller for calibration
- With workpiece-controlled air cushion pressure pad
- 4-way adjustable grit compensation
- With pneumatic belt tensioning device
- With a rotating cleaning brush at the machine outlet
- Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt tracking for uniform belt wear
- With roller table at the infeed
- With digital display of the motorized workpiece thickness adjustment
- With additional veneer sanding bar
- With 2x replacement sanding pads
- Sanding width: 1350 mm
- Sanding belt length: 1900 mm
Hodpfx Aowka T Ssb Eefd
- Pass-through height: 150 mm
- Main motor: 15 kW
- Feed speed steplessly adjustable 2.5 – 12.5 m/min
- Extraction nozzles: 2 x 200 mm
Dimensions: approx. 2300 x 2000 x 2300 mm
Weight: approx. 2300 kg
Photos show the machine in non-refurbished condition!
Availability: approx. end of January 2026
Location: Röllbach
Mali oglas
Leutkirch im Allgäu
423 km
Brusilnik s širokim pasom
Format4FINdustry 1353
Pokliči
Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, višina brušenja: 200 mm, moč: 11,03 kW (15,00 KM), hitrost brusilnega traku: 18.000 mm/s, dolžina brusnega traku: 2.620 mm, širina brusilnega traku: 1.370 mm, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Further Technical Data
Feed speed: 2.8 - 20 m/min
The new Format4 wide belt sanders findustry excel in industrial use, particularly due to the individually configurable assembly of sanding units. The machine can be equipped with two, three, or four units, tailored exactly to the specific application and area of use. This high degree of customization guarantees fulfillment of all requirements regarding surface finish and processing efficiency.
Maximum Operating Comfort in Industrial Applications
The clearly structured touchscreen control is intuitive to use. All machine functions are displayed graphically and clearly on the digital display. The pass-through thickness can be set to tenths of a millimeter at the touch of a button directly from the control panel. The automatic thickness measurement makes it easier to set the machine for the desired workpiece thickness. The workpiece can be measured without additional measuring devices, and the thickness is then transmitted directly “wirelessly” to the machine. The fixed infeed table height of 900 mm ensures easy and fatigue-free working. A vacuum table, roller table extensions on the infeed and outfeed sides, and optional pressure shoes on the sanding units provide optimal comfort and ideal working conditions for workpieces of any format.
Optional Equipment
10E LACQUER - Cross sanding unit ESC instead of 1st contact unit
20A 2nd contact roller unit
22 2nd sanding roller in 85° Shore
30E LACQUER - Superfinish unit ESC instead of 3rd contact unit
39 Switching contact for pneumatic slide control (price/piece) *6
51 Soft start for 15 kW (20 hp motor)
59B Control unit with 15" color touchscreen
63 Scotch-Brite brush unit at machine outfeed
71 Oscillating cleaning blower for workpiece and conveyor belt
72 Ionizing bar at machine outfeed
73 Vacuum table with 4 kW (5.5 hp) blower
74 Inverter for vacuum blower for vacuum adjustment
Hjdpjxtpydjfx Ab Ejfd
83 Sanding height 200 mm instead of 170 mm
84 Optimized control software for special machining
87 ESC workpiece recognition sensor with 50 segments
201 2nd motor with output 15 kW
Further Information
Workpiece height: 3 - 170 mm
Constant infeed height – fixed table: 900 mm
Grooved sanding roller: Ø 250 mm
Delivery and installation included in postal code area 71,72,73,77,78,79,86,87,88,89
Mali oglas
Leutkirch im Allgäu
423 km
Brusilnik s širokim pasom
FelderFW1102 perform
Pokliči
Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.100 mm, višina brušenja: 170 mm, moč: 14,71 kW (20,00 KM), dolžina brusnega traku: 1.900 mm, širina brusilnega traku: 1.100 mm, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Further technical data:
Working height: 3 - 170 mm
Extraction connection: 200 / 120 mm
Standard equipment:
- Star-delta starter
- CE safety standards
- Electrically controlled feed table height adjustment incl. fine adjustment from the control panel
- Infinitely variable feed speed from 2.5–18 m/min adjustable via inverter from the control panel
- Hand guard and workpiece thickness protection
- Endless honeycomb structure conveyor belt
Hedpsvf D S Ajfx Ab Ejfd
- Automatic conveyor belt tracking
- 7" color touch screen control unit
- 1st unit: rubber-coated, profiled contact roller with 85° Shore hardness
- 2nd unit (sanding pad unit): the electro-pneumatic segmented sanding pad incl. 25 mm segment width allows for independent processing of multiple workpieces for perfect veneer sanding. The standard installed, time-controlled cleaning blower guarantees maximum sanding belt service life, especially when sanding lacquer or using very fine grits.
- Digital grit compensation
- Mechanically pre-tensioned rubber pressure rollers
- Sanding belt oscillation electronically-pneumatically controlled
- Electronic sanding belt tracking safety
- 1 motor with 15 kW (20 HP) incl. automatic star-delta start
- Min. air pressure (bar): 6
Optional equipment:
- Vacuum table with integrated blower in the machine frame
- 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec
- Double-sided roller table extension, 200 mm
- Scotch-Brite brush unit at the machine outfeed, D=150 mm
- Control contact for slide valve actuation. This allows shut-off valves of the extraction system to be controlled.
Incl. delivery and installation in postal code area 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCMSandya UNO RCS
Pokliči
Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding
SCM
Model RCS
1st Unit: Calibration roller, steel
2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft))
Working width: 920 mm
Abrasive belt dimensions: 930 x 1,525 mm
Motor power: 11.0 kW, 400 V, 50 Hz
Feed motor power: 0.37 kW, 400 V, 50 Hz
2 feed speeds
Electromotoric table height adjustment
Main switch lockable
2 x emergency stop
Table extension with 2 rollers, front & rear
Sanding pad inserts fitted with new graphite cloth
Includes nearly new abrasive belts
Includes all documentation
Note for used machinery:
• Errors in technical specifications and intermediate sale reserved.
• Listed prices are ex-works and free loading!
• The machinery has been cleaned and function-tested.
• All machines are sold as seen, with no warranty or guarantee whatsoever.
Buyers are welcome to inspect the machines on site.
• Special agreements are only possible in written form.
(We only respond to inquiries that include your full address and telephone number!)
Hedpfxjxqggce Ab Eofd
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SACrte 1000
Pokliči
Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing
Working width: 1000 mm
Abrasive belt dimensions: 2200 x 1030 mm
Workpiece dimensions: 3 - 170 mm
Table height adjustment motor: 0.18 kW, 400 V, 50 Hz
Main motor: 7.5 kW, 400 V, 50 Hz
2 feed rates: 5.5 & 11 m/min
1st Unit:
Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad
Sanding pad NEW
2nd Unit:
Hfedpfx Aoudxchjb Esd
Cleaning brush
Compressed air requirement: approx. 6 bar
Extraction port diameter: 200 mm
Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm
Weight: approx. 1,800 kg
Automatic workpiece thickness adjustment with digital display
Sanding belt oscillation
Emergency stop for sanding belt with disc brakes
Table extension with 3 outfeed rollers
Emergency stop button
Main switch
CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago
OVER 30 WIDE BELT SANDING BELTS INCLUDED
Note on used machines:
• Technical data subject to change and prior sale.
• Prices quoted are ex location – free loading.
• The machine has been cleaned and tested for functionality.
• All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises.
• Special agreements only valid in written form.
(We will only respond to inquiries that include your address and phone number!)
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCM DMCChronosand 2 RRP 1100
Pokliči
Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding
Working width: 1100 mm
Hfsdpfxstwzyfe Ab Eed
Min/max workpiece height: 3 - 120 mm
Feed motor power: 0.8 kW
Abrasive belt speed: 18 m/sec
Abrasive belt dimensions: 1115 x 2620 mm
Feed speed: 4.5 / 9 m/min
Extraction port: 3 x 160 mm
Compressed air connection: 6 bar
1st Unit: Sanding roller
Rubber-coated 90 Sh
Motor power: 11 kW
2nd Unit: Combination unit
Rubber-coated sanding roller 60 Sh
Rigid sanding pad
Motor power: 11 kW
3rd Unit: Cleaning brush
Automatic workpiece thickness adjustment at infeed with digital thickness display
Table extension at outfeed
Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm
Weight (approx.): 3000 kg
Note for used machines:
• Subject to technical changes and prior sale.
• Prices quoted are ex-location and free loaded.
• The machine has been cleaned and function tested.
• All machines are sold as inspected, without any warranty claims.
Buyers are welcome to inspect the machine at its location.
• Special agreements are only valid if made in writing.
(We only respond to inquiries that include your address and phone number!)
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCM / DMCsd 60 RRCS
Pokliči
Stanje: novo, Wide belt sander for calibration and fine sanding
Working width: 1,100 mm
Hfjdsitvkuspfx Ab Ejd
Min./Max. working height: 4 / 170 mm
Abrasive belt width: 1,115 mm
Abrasive belt length: 2,150 mm
Gear motor: 2.2 kW
Feed speed: variable m/min
Infeed and outfeed support rollers for long and short workpieces
Oscillating belt cleaning blower 1st unit
Oscillating belt cleaning blower 2nd unit
Oscillating belt cleaning blower 3rd unit
10” touchscreen operating panel “eye-S”
1st unit: steel roller
2nd unit: rubber-coated calibrating roller 85SH
3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH
Motor power 1st unit: 18.5 kW
Motor power 2nd & 3rd unit: 18.5 kW
Version "B" for RRCS with:
pneumatic switching on/off 1st unit
pneumatic switching on/off 2nd unit
pneumatic switching on/off 3rd unit
“MESAR” elastic segmented sanding pad
pneumatic switching on/off of the sanding pad unit
electronic adjustment of working height
SPECIAL PRICE!
AVAILABLE IMMEDIATELY!
Mali oglas
Schwanberg
69 km
Brusilnik s širokim pasom
SCM DMCsd 70 RCS 135
Pokliči
Stanje: novo, Technical data:
Working width mm: 1,350
Min./max. working height mm: 4 - 170
Abrasive belt width/length mm: 1,370 / 2,620
Main motor power kW: 18.5 with inverter
Feed speed variable m/min: 3.5 - 18
Working units:
1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm
2nd unit: Combi:
Hjdpehtuvrofx Ab Esfd
Rubber-coated sanding roller diameter 160 mm, 45 Sh
Elastic electronic segmented sanding pad “MESAR” with 24 segments
Version C:
- Elastic electronic segmented sanding pad “MESAR” complete with:
- Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit
- Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece.
Versions 135:
“MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed
Additional equipment:
Roller table at infeed and outfeed for long workpieces
Perforated table and conveyor belt
Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame
Oscillating blow-off unit 2nd unit
Touch screen 10.4” display with ‘eye S software integration’
PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!
Mali oglas
Trag
71 km
Brusilnik s širokim pasom
SCM DMCSD 90
Pokliči
Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus”
Technical Specifications
Usable Working Width: 1350 mm
Min./Max. Working Height (with fixed table): 4 – 200 mm
Abrasive Belts: 1,370 x 2,620 mm
Feed Speed: 3.5–18 m/min
Working Units:
• “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed
• 1st Position: “RA” angled ribbed steel contact roller D=250 mm
• 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore
• Floating pressure shoe at 1st position with pneumatic adjustment
• 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions
• Oscillating blow-off device at 1st and 2nd units
• Workpiece cleaning unit with rotating air nozzles
Drive:
• Motor 1st unit: 18.5 kW
• Motor 2nd unit with inverter: 15 kW
Table:
• Fixed table, working height 900 mm
• Infeed roller table for long workpieces
• Outfeed roller table for long workpieces
• Perforated table and conveyor belt, 50 Shore
• Vacuum table with integrated electric fan 4 kW in machine base
• Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW)
Control:
Hfodpfx Aod E Ixzsb Eed
• Electronic programming unit “Pro-Sand”
• 10.4" touch screen display
• Door with inspection window on operator side for machines with 2 working units
• LED interior lighting
Note on used machines:
• Subject to technical changes and prior sale.
• Quoted prices are ex-location, loaded free of charge!
• The machines have been cleaned and function tested.
• All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location.
• Special agreements are only possible in written form.
(We will only respond to inquiries including your address and telephone number!)
Mali oglas
Nattheim
457 km
Brusilnik s širokim pasom
DMCLSL 130
Pokliči
Stanje: rabljeno, Leto izdelave: 1986, največja delovna širina: 1300 mm
Število trakov: 3-trak
1. agregat: čeveljni agregat
Premer 1. valja: 100 mm
Izvedba 1. agregata: jekleni valj/čevelj
2. agregat: valj/čevelj
Premer 2. valja: 100 mm
Izvedba 2. agregata: jekleni valj
Hjdpfovvki Nex Ab Ejfd
3. agregat: valj/čevelj
Premer 3. valja: 100 mm
Izvedba 3. valja: utorni jekleni valj
Brušenje s čevljem pri 3. agregatu: elektronski posamezni segmenti
Čistilne krtače: da
Možno brušenje laka: da
Pihanje traku: da
Vakuumska preproga: da
Lokacija zaloge: Nattheim
Mali oglas
Nattheim
457 km
Brusilnik s širokim pasom
BütferingClassic 111 E
Pokliči
Stanje: rabljeno, Leto izdelave: 1997, Število trakov: 1-trak Največja prehodna višina: 150 mm Največja delovna širina: 1100 mm 1. agregat: Kombinirani agregat Premer 1. valja: Jekleni valj Izvedba 1. agregata: Valjčni/čevljarski agregat Brušni čevelj 1. agregata: elektronski posamezni segmenti Širina segmenta 50 mm Dolžina brusnega traku 1. agregata: 1900 mm Širina brusnega traku 1. agregata: 1120 mm Moč motorja: kW Podajalna hitrost 4 in 8 m/min 2. agregat: Prašna krtača Teža pribl.: 2000 kg Dimenzije: 1800 x 1450 x 2120 mm Lokacija skladišča: Nattheim
Hfjdpfxevvkkae Ab Eod
Mali oglas
Kanzach
464 km
Brusilnik s širokim pasom
BÜTFERINGFBS
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1977, Wide belt sander Bütfering
Hsdpfxondccto Ab Eefd
See pictures
Machine is immediately available
The machine was in production and running without any issues until a few days ago, but has been used very rarely.
Mali oglas
Avstrija
205 km
Brusilnik s širokim pasom
KündigKündig Botop
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 650 mm, Oprema: Na voljo je tipska ploščica, Kündig Botop, sanding unit above: roller, pneumatically-operated pad; sanding unit below: roller, pneumatically-operated pad. The machine has been completely overhauled: new conveyor belt and new rollers.
Hfjdevmt D Rspfx Ab Eed
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Bad Sooden-Allendorf
677 km
Brusilnik s širokim pasom
SCMdmc sd 60 RCS 135
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, SCM Wide Belt Calibration and Fine Finishing Sander
Model: dmc sd 60 RCS 135
Technical Specifications:
- Working width: 1,100 mm
- Min./max. working height: 4–170 mm
- Sanding belt width: 1,120 mm
- Sanding belt length: 2,150 mm
- Main motor power: 11 (15) kW (HP)
- Gear motor: 0.45/0.8 (0.6/1.1) kW (HP)
- Feed speed: 4.5/9 m/min
Standard Equipment:
- R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore – 1st station
- R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore – 2nd station
- Hard sanding pad with manual working height adjustment
- Motor power for first unit: 11 kW (15 HP)
- Electronic ammeter for the main motor to display current consumption
- Electronic display for working height
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Kick-back protection at infeed ahead of the first unit
- Rubber feed belt, 60 Shore
- Roller table with two rollers at both the infeed and outfeed of the work table
Hsdpjtwqn Ssfx Ab Esfd
- Conveyor feed with two speeds: 4.5 / 9 m/min via gear motor
- Automatic belt centering
Includes the following special equipment:
- 1x version "B" for RCS with: pneumatic on/off control for roller on 1st unit "R" + pneumatic on/off control for roller on 2nd unit "CS" + "MESAR" elastic segmented sanding pad + pneumatic on/off control for the sanding pad unit + electronic programming unit "LOGIC 50" + electronic working height adjustment
- 1x CE safety specifications
- 1x roller table at infeed and outfeed for long workpieces, equipped with 5 idler rollers
- 1x "RA" helical-ribbed steel contact roller for 1st unit
- 1x 15 kW main motor
- 1x sanding belt wear optimizer
- 1x LED interior lighting
- 1x door with viewing window on the rear side
- 1x Logic SC control system
Mali oglas
Achern
594 km
Široki skobeljnik
KupfermühleKH 30
Pokliči
Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Kupfermühle KH 30
4-Side Planer
with Additional Unit – Horizontal Working Spindle
with Outfeed Unit
4-Side Universal Planing Machine
KUPFERMÜHLE
Electrics: 400 Volt / 50 Hz ...../58.5 kW
Original paintwork still in Reseda Green RAL 6011
Motor Power & Arrangement (kW):
Bottom: 7.5 / Top: 11.0 / Vertical right: 7.5 / Vertical left: 11.0
5th shaft bottom: 11.0 / Feed: 7.5 / Thicknessing: 3.0
Hfsdpfxox Ehfco Ab Ejd
Feed speed min/max: 5 – 30 m/min
Working spindles: 5 units
Waste disposal / extraction ports:
Bottom: 200 / Top: 200 / Right: 160 / Left: 160 mm / Bottom: 140 mm
Working width min/max: 30 mm / 310 mm
Working height min/max (2-sided): 15 mm / 300 mm
Working height min/max (4-sided): 15 mm / 180 mm (OPTION 250 or 300 mm)
Key Features:
- Constant table height
- Guide fence on the right
- Interchangeable planer heads
- Jointing device below and above
- Slotted and replaceable table plates for sound insulation
- Outfeed unit with 2 driven top rollers and double-sided guided upper section
- Height adjustment synchronized with base machine
Machine condition: refurbished and tested, with functional warranty
Further options:
- Repainting
- New paint finish
- General overhaul
etc.
Mali oglas
Bitburg
758 km
Brusilnik s širokim pasom
KündigPerfect -2 1350 REd-L sofort verfügbar -
Pokliči
Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L
Wide Belt Sander incl. intermediate lacquer sanding setup
Special price for demonstration unit – showroom machine –
- Robust, space-saving wide belt sander for the highest demands.
- Consistent working height thanks to upper section adjustment
- Working width: 1350 mm
- Top sanding, with 2 sanding units
- Grooved rubber contact roller of proven hardness
- Infinitely variable height adjustment of contact roller per abrasive scale
- Electric lifting/lowering of the contact roller according to selected unit
- Electronically controlled segmented sanding pad
- Complete sanding pad unit tiltable by 10 degrees
- Parallel spring-loaded, ground steel pressure roller at infeed
- Rubberized pressure rollers between sanding units and at outfeed
- 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz
- Motor-driven, finely adjustable height adjustment with digital display
- Pneumatic belt tensioning, tracking, and oscillation
- Compressed air consumption approx. 2 l/min
- Optimum safety with automatic instant stop and disc brake in case of belt break, etc.
- Workpiece feed 2.2 kW with transport belt and drive roller
- Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces
- Automatic thickness setting across whole working width
- Over-thickness protection with immediate feed stop and lift-off mechanism
- Infinitely variable chip removal adjustment
- Electronic feed adjustment on control panel, stepless 3 - 15 m/min
- PLC control with teach-in memory function
- Pneumatic belt control
Hodpfx Abek Dpp Ss Eefd
- Workpiece support with rollers at infeed and outfeed
- Enormatic: Fully automated fast setup and feed activation
- Eco energy-saving mode
- Fault diagnosis
- Passage height 210 mm up to 18.5 kW
- Sanding belt dimension 1350 x 2000 mm
Perfect - Equipment Features:
- High-quality swiveling plexiglass control panel
- 10" touch screen
- Industrial control system
- Automatic pressure regulation and memory for sanding pad elements
- Electronic compensation of abrasive belt grit size
- Job and operating hour counters
Lacquer equipment
- Infinitely variable sanding belt speed on 2nd unit
- Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled
- Electronic sanding pad with 22 mm segment width
- Additional sanding pad insert
Additional options included with the machine:
Foldable outfeed table extension (without panel)
C10) LED package
ASB5+AS3) ECS workpiece air-blow-off with fan
Location: 54634 Bitburg
– Immediately available –
Mali oglas
Sierakowska Huta
932 km
Brusilnik s širokim pasom
SicarUnica 2R 1100
Pokliči
Stanje: zelo dobro (rabljeno), KATALOGNA ŠTEVILKA 7818
Tehnični podatki:
- maks. širina obdelovanca: 1100 mm
- maks. višina obdelovanca: 180 mm
2 agregata:
1) gumirani rebrasti valj za kalibracijo
2) gumirani rebrasti valj za kalibracijo
– od zgoraj:
- kovinski pritisni valj
- agregat
- kovinski pritisni valj
- agregat
- kovinski pritisni valj
– od spodaj:
- 2 gumirani drsni valji
- vlečna tračna
- 2 gumirani drsni valji
- pnevmatska oscilacija traku
Hfsdpfx Abjx Dbh Ij Ejd
- električni dvižni delovni pult
- potenciometer za nastavljanje debeline brušenja
- 2 hitrosti pomika
- pogonski motor 0,80 kW
- glavni motor 10 kW
- delovni tlak 6-8 bar
- premer odsesovalnega nastavka 2x155 mm
- skupne mere d/š/v: 1670x1740x2040 mm
- teža: 1200 kg
PREDNOSTI
– italijanska proizvodnja
– potenciometer za debelino brušenja
– 2 brusilna agregata
– rabljeni brusilni stroj, v zelo dobrem stanju
Cena brez DDV: 25.900 PLN
Cena brez DDV: 6.160 EUR (odvisno od tečaja 4,2 EUR)
(Cene se lahko spremenijo ob večjih valutnih nihanjih)
Olajšamo vam iskanje: "roki ostalo"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Roki Ostalo (555)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec












































































































































































































