Roko Rob Robni Stroj nakup rabljenega (30.526)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Nwedpfxsc S Di Ro Agxsf Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: Njdpsfbr S Refx Agxewf • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Nsdjc Tmygspfx Agxswf Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno,

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit - Cross-cutting unit Neded Inktspfx Agxjwf - Milling unit - Fine milling unit - Scraper - Buffing unit

Stanje: novo, Vrsta: GB/T10850 Moč motorja: 0,18 kW Nsdpfx Asd Tymnogxswf Tlak zraka: 3–6 bar Napetost napajanja: 220 V, 50 Hz Skupna moč: 1,4 kW Moč ogrevanja: 1,2 kW Širina roba: 8–50 mm Debelina roba: 0,3–3 mm Hitrost lepljenja roba: 0–26 cm/s Vakuumsko sesanje obdelovanca Transportne dimenzije: Neto teža: 300 kg

Leto izdelave: 1999, stanje: dober (rabljeno), Edge banding machine Biesse Polymac ERGHO 5, year of manufacture 1999 Biesse Italy S/N 80709 Max. panel thickness: 10–45 mm Min. and max. edge band thickness: 13–60 mm Max. edging material thickness (in rolls): 0.4–3 mm Min. panel width: 50 mm Min. panel length: 150 mm Working speed (m/min): 10 / 20 Technical details: - Glue pot VC 700 - End trimming unit 701 - Edge trimming unit RS 700 - Corner rounding unit CR 200 - Tilting edge trimming unit + beveling RI 700 - Compact edge scraper RBK501 Njdpsgtx Aqjfx Agxswf - Buffing units SP700 - Edge sanding unit LV 700 Additional features: - Heated infeed guide - PLC control - Panel support guide - Large-diameter roll holder - Edge shearing device for 3 mm rolled edging 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2900 kg

Stanje: rabljeno, številka stroja/vozila: 008288, Pozicija 1: Nakladalnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 2: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 3: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 4: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Nodpfx Agsx Nv S Uexswf Pozicija 5: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 6: Sredinska žaga SCM-MAHROS - STEFANI - CELASCHI Pozicija 7: Razkladalnik SCM-MAHROS - STEFANI - CELASCHI

Stanje: dober (rabljeno), Leto izdelave: 1989, Stroj s popolno opremo Dolžina ca. 9 m Lepljenje Rezanje robov Predfrezanje Nwodpof Ua R Hofx Agxsf Zaobljeno frezanje Kopiranje kotov Poteg rezilo Poliranje Kopiranje kotov

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dokumentacija / priročnik, dvostranski, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm Nwodpsxwui Esfx Agxof

Stanje: skoraj kot novo (rabljeno), Ponujamo malo rabljen avtomatski brusilni stroj za steklo z 8 vreteni proizvajalca Bohle, letnik 2012. Nodpfxjyi Dxhj Agxewf

Stanje: rabljeno, številka stroja/vozila: 006561, Vrsta nameščenega roba: tanek rob, močan rob, masiven les Sistem lepljenja: EVA Stroj za lepljenje robov: Stroj 1 Maks. širina panela: 2800 mm Delovne enote, desna stran: 11 kos Delovne enote, leva stran: 11 kos Nedpfjyzplfex Agxjwf

Stanje: rabljeno, številka stroja/vozila: 008430, Pozicija 1: Nakladalec MAHROS + STEFANI-RUNNER + EVOLUTION Pozicija 2: Dvostranski robni lepilni stroj MAHROS + STEFANI-RUNNER + EVOLUTION Pozicija 3: Razkladalec MAHROS + STEFANI-RUNNER + EVOLUTION Nwodpfx Aoyqxx Sogxsf

Stanje: rabljeno, številka stroja/vozila: 007354, Type of applied edge: thin edge, thick edge Nwedpeyg Edasfx Agxof Glue system: EVA Multi-function unit: yes Edgebander: Machine 1 & 2 Max. panel width: 240 mm Max. feed speed: 40 m/min Working units, right side: 9 units Working units, left side: 9 units

Stanje: novo, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration model- New: GLUJET GJ725 This offer includes a comprehensive equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutter unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Adhesive application system Glu Jet GJ725 NC PUR PRO - Pneumatic pressure unit 1912-3 - Pneumatic end trimming unit 1918, 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, left-hand rotation - Diamond cutter Ø 56/60 mm, right-hand rotation - Corner copying unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spraying unit TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and glue quantity control Njdpfxsu R Sy Aj Agxowf - Long infeed fence 1,252 mm - Motorized adjustment of infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for 1918 end trimming unit - Shelf program - Flat scraper FK701 - Spraying unit GM301 after pressure unit - new demonstration machine -

Stanje: zelo dobro (rabljeno), Katalogna številka 7963 TEHNIČNI PODATKI Oprema: - krožnik - grelna letev - giljotina - posoda za lepilo (granulat) - podajalnik traku - giljotina - 3 pritisni valjčki - rezalna enota z žagami za končno obrezovanje - 2 rezkalni enoti za oblikovanje robov (radialni rezkarji) Nwedpfx Aoyzy D Sogxjf - strgala za odstranjevanje odvečnega lepila - 2 polirki - debelina obdelovanca 10-60 mm - debelina robnega traku 0,4-5 mm - izvlečna podporna roka iz delovne mize - podajalna hitrost 9 m/min - skupna moč 5,5 kW - premer izsesovalnega priključka 120 mm - dimenzije (D/Š/V) 3100/1080/1470 mm - teža 670 kg PREDNOSTI – tehnična dokumentacija DTR – ni ponovno barvana – avstrijska proizvodnja – leto izdelave 2010 – idealno stanje – rabljeni robni lepilni stroj Neto cena: 17.900 PLN Neto cena: 4.260 EUR Neto cena preračunana po tečaju 4,2 PLN/EUR (v primeru večjih sprememb tečaja se cena lahko spremeni)

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Nwjdpfx Agsyxl Sijxjf Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: rabljeno, številka stroja/vozila: 008412, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: EVA Multifunkcijska enota: da Stroj za lepljenje robov: Stroj 1 in 2 Nedoyilxmopfx Agxewf Največja podajalna hitrost: 40 m/min Delovne enote, desna stran: 11 kosov Delovne enote, leva stran: 11 kosov

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Double fine millers, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Nsdpfxeyq Avhs Agxowf Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. External reference: 7685

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Njdpfsywk Elsx Agxswf Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking Nwjdpfx Agoyttrxsxsf The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber pad. Digital counter for height adjustment - Direct adhesive application to the workpiece: leak-proof glue pot with glue supply from below and quick heat-up time after machine standstill - Flush trimming unit for workpiece front and rear edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°, central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical details: Nedpfjytkiujx Agxewf - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total installed load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm without film tray Ø 800 - Net weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna višina: 1.445 mm, največja dolžina izdelka: 2.740 mm, Cette CASADEI Bordatrice E350PM a été fabriquée en 2022. Elle dispose d’une plage de hauteur de panneaux de 10 à 45 mm et prend en charge des chants d’une épaisseur de 0,4 à 2 mm. La machine fonctionne à une vitesse d’avance de 7 m/min et offre une puissance de chauffe du bac à colle de 1 490 W. Profitez de cette opportunité pour acquérir la plaqueuse de chants CASADEI Bordatrice E350PM. Contactez-nous pour plus d’informations. • Hauteur de panneau : 10-45 mm • Vitesse de bande d’avance : 7 m/min • Épaisseur du chant : 0,4-2 mm • Largeur minimale du panneau : 210 mm • Longueur minimale du panneau : 600 mm • Distance minimale entre panneaux : 95 mm • Ouverture de support de panneau extensible : 310 mm • Pression de service pneumatique : 0,65 MPa (6,5 bar) • Consommation d’air moyenne : 320 Nl/cycle • Puissance de chauffe du bac à colle : 1 490 W • Dimensions globales de la machine (mode opératoire) : 2 740 x 1 445 x 945 mm (L x H x P) • Vitesse de l’air d’aspiration : 30 m/s • Débit d’air d’aspiration : 950 m³/h Nwjdpfx Agex D Icfoxof

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Nsdpfxsyk Tkvj Agxewf Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, vrsta nastavitve višine: mehanski, skupna masa: 450 kg, – Manufactured in Italy – Year of manufacture: 2016 – Pre-milling – Operating manual (DTR), CE certified Nwodpfxewb Ha Ts Agxef TECHNICAL SPECIFICATIONS: – Edging thickness: 0.5 - 3 mm – Solid wood strip thickness: 0.5 - 5 mm – Workpiece height: 8 - 50 mm – Minimum edge-banding length: 160 mm – Minimum panel width: 110 mm – Feed speed: 7 m/min – Pre-milling unit – Radius cutters – End trimming unit – Radius scraper – Straight scraper – Air blow-off for each unit – Operating pressure: 8 bar – Working length of the machine: 2030 mm – Transport dimensions (L/W/H): 330 / 80 / 125 cm – Weight: 450 kg