Rob Razvrštanje Stroj nakup rabljenega (89.447)

Stanje: novo, Leto izdelave: 2025, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Iisdpeff Ed Tefx Ah Djh Availability: Short notice

Stanje: dober (rabljeno), 1 x Edge Grinding Machine Iodefwx Dajpfx Ah Dsih Manufacturer: Christen Model: KB 2 Technical Specifications: Working Area: Rule length: 370 mm Sheet thickness: 0 to 2 mm Maximum edge clearance with fully opened stop: 3 mm Speed: 3400 rpm Grinding wheels: 150 x 125 x 42 mm + 125 x 90 x 42 mm Accessories: 2 x grinding wheels with flange 1 x additional flange 1 x wrench for grinding wheel change The machine can be inspected under power.

Leto izdelave: 1990, Stanje: dober (rabljeno), - double-sided brushing machine Metabo 7445 - Metabo 72730 - 4 kW - Shaft diameter: 35 mm - 1500 rpm Ijdpfsbdm Taox Ah Deih

Stanje: novo, Edge sanding machine Bernardo HV 80 OSZI Work table: 850 x 300 mm Table height adjustment: 90 mm Belt length: 2510 mm Belt width: 150 mm Sanding belt back panel: 950 x 200 mm Sanding unit lockable: 90° / 0° Belt speed: 16 m/sec Additional table: 300 x 250 mm Extraction connection: Ø100 mm Roller diameter: 110 mm Motor output (continuous duty S1 100%): 1.5 kW (2.0 HP) Motor input power (intermittent duty S6 40%): 2.1 kW (2.8 HP) Voltage: 400 V Machine dimensions (W x D x H): 1400 x 680 x 1220 mm Isdpfx Aed Tb U Soh Dsih Weight: approx. 148 kg

Stanje: rabljeno,

Leto izdelave: 1995, Stanje: dober (rabljeno), številka stroja/vozila: 4202, Technical data: Iodpfx Ajd Af Shjh Djih - Plate thickness up to: 6 – 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel depth in a single pass: 10 mm - Working speed: 2.6 m/min - Drive: 400 V / 2.2 kW - Space requirement approx.: W 550 x D 500 x H 700 mm - Weight approx.: 65 kg

Stanje: pripravljen za uporabo (rabljen), Dowel Cutting and Chamfering Machine Iiedpfx Ahswmpvho Deh Manufacturer: Löser Model: AA 200 Bench-top machine for the production of wooden dowels, designed for efficient cutting to length and chamfering of dowel rods / round bars. The dowel cutting and chamfering machine type AA 200 is a machine with low to medium capacity. It can cut and chamfer round bars made of wood, plastic, hard paper, and other materials. The dowel length is adjustable between 20 and 150 mm, set using an adjustment scale. The chamfer size can be set as required. The machine comes standard with a magazine ring, allowing the operator to run multiple machines simultaneously or perform other tasks. The machine features a solid, torsion-resistant cast iron frame. Additional advantages include very easy operation, simple maintenance, and easily accessible lubrication points. Technical data: - For dowel diameters approx. 6–13 mm - Minimum cutting length: 15 mm - Maximum cutting length: 150 mm - Operating capacity: approx. 2000 pieces per hour - Weight: 53 kg (bench machine) Includes adapters for dowel diameters 8–9 mm, 10–11 mm, and 12–13 mm. Gear and chain have been replaced.

Leto izdelave: 1981, Stanje: rabljeno, Parts Cleaning Machine Pero Rob 3 - 3455 Year of Manufacture: 1981 Technical Specifications: Operating Voltage: 380 V Rated Current: 103 A Total Heating Capacity: 60 kW Iijdpfx Ahjlu Ex Hs Dsh Internal Dimensions: 2100 mm x 1100 mm x 800 mm (L x W x H) External Dimensions: approx. 4300 mm x 2100 mm x 2800 mm (L x W x H)

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 3000 mm Table size: 960 mm x 352 mm Iisdpfogtdpujx Ah Doh Auxiliary table: 330 mm x 330 mm Sanding drum diameter: 60 mm / 100 mm / 120 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5430, Naprava za učinkovito čiščenje delov z vodnimi čistilnimi mediji Delovni prostor: 900 x 2100 mm Rabljena stroj, nekateri pločevinasti deli imajo rjo. Iiodpfxewqpnrs Ah Deh Prodaja brez garancije PERO ROBOMAT so zasnovani za čiščenje raznovrstnih delov – bodisi rahlo naoljenih ali močno onesnaženih. V univerzalnem delovnem prostoru robustne naprave ROBOMAT so obdelovanci in deli z različnimi geometrijami pozicionirani in z močnim pršenjem zanesljivo očiščeni. PERO ROBOMAT je na voljo tudi kot model z dvema kopelma za površinsko čiščenje pred lakiranjem in končno montažo.

Stanje: zelo dobro (rabljeno), KD-PUTZ with oiling Isdpfxogh A Sve Ah Djih Completely made of stainless steel Sheet metal cleaning machine for perforated sheets and standard sheets with 2 edges For 60x80 sheets, edging on the short side Excellent condition Connection: 16 A

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery system - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW - Space requirement for filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m Iiedpfx Ahollvr De Doh - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Iodpsc S Di Rjfx Ah Doih Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: rabljeno, TECHNICAL DATA - Loading Dimensions: * Width: 1500 [mm] * Depth x Height: 850 x 400 / 700 x 550 / 400 x 650 [mm] - Loading Weight: 1000 [kg] - Washing Bath * Volume: 600 [L] * Heating Power: 18 [kW] - Rinsing Bath * Volume: 650 [L] * Heating Power: 18 [kW] - Spray Performance (3 bar): 950 [L/min] Ijdpfoug U R Tsx Ah Doih - Electrical Power: 43 [kW] - Noise Level: < 80 [dBA] - Machine Dimensions (L x W x H): 4450 x 1800 x 2540 [mm] - Machine Weight: 1300 [kg] EQUIPMENT - Oil Separator - Fine Filtration - Manual Loading

Stanje: novo, Leto izdelave: 2022, Belt width: 150 mm Belt length: 2270 mm Veneer sanding unit: no Oscillation: yes Roller diameter: 38 mm, 50 mm, 76 mm Sanding unit tiltable: yes / 90° - 0° Worktable: 680 mm x 310 mm Auxiliary table: 260 x 260 mm Belt speed: 16 m/sec. Extraction connection: 100 mm x 2 Motor power: 1.5 kW / 400 V Machine length: 1350 mm Machine width: 585 mm Weight: 162 kg Isdpfxogulrxj Ah Dsih

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300 Ijdpfx Ahjd Hinto Djih

Stanje: novo, Leto izdelave: 2025, Debarking and Chamfering Machine ECS500 / ECS500 E • Weight: 150kg / 250kg • Drive: PTO hub drive / Electric three-phase motor 5.5kW • Dimensions (LxWxH): 100cm x 90cm x 155cm • 3-point hitch for tractor • Knife disc diameter: 500mm Iijdpfjr D Nk Nox Ah Djh • Knives are resharpenable and replaceable Price: €5,400 / €6,700

Stanje: novo, Leto izdelave: 2024, Abrasive belt size: 150 x 2280 mm Motor power: 2.2 kW Abrasive belt oscillation Pneumatic abrasive belt tensioning Grinding unit swivels 90° - 180° Additional table at deflection roller Isdpodq H D Ssfx Ah Dsih

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm Iodpjbahd Eefx Ah Djih - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm

Stanje: novo, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Speed: 2,800 rpm Maximum chamfer width: 1 mm Standard equipment includes: Iiodpfx Ahodurxns Deh - Special flap grinding wheel K80-ST - Extraction nozzle - Operating manual

Stanje: novo, Leto izdelave: 2022, Bandwidth: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Tilting sanding unit: yes Iisdpfxegr Ufhj Ah Deh Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Weight: 290 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 560 x 500 x 580 mm Weight: 80 kg Total power requirement: 0.75 kW Dowel Cutting and Chamfering Machine FS-36 - For cutting to length and chamfering dowels from 6 to 18 mm Ijdsvz Hf Dspfx Ah Djih - Min. dowel length: 20 mm - Max. dowel length: 150 mm - Motor: 0.75 kW - Output: 36 pieces/min - Incl. guide bushing Ø 8 mm for dowels - Weight: 80 kg - Dimensions (L x W x H): 560 x 500 x 580 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Iedpfefbr S Rox Ah Doih Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: novo, Deburring machine Make: Assfalg Ijdpfx Ahsb E Dc Hj Djih Model: FS 5 Condition: New machine Speed: 2,800 rpm Max. chamfer width: 3 mm Standard equipment includes: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating manual

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Iijdjc Tmygepfx Ah Deh Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)