Konzolni regali nakup rabljenega (93)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm Cedpfx Aisd Tqaleqshc - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: zelo dobro (rabljeno), Konzolni regal, obojestranski, 10 nivojev, izteg 380 mm, izvlečen za 220 mm, višina 2420 mm, skupna globina 1000 mm, dolžina približno 2700 mm. Konzolni nosilci iz 80 mm U-profila. Zelo stabilna izvedba. Regal je vroče pocinkan. Teža 1190 kg. Regal je za transport razstavljen. Chjdjw Icyuspfx Aiqsc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Cedpfx Aisd Tbbdjqohc - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: novo, Nosilnost regala: 18.000 kg Chedpfx Aiofgyg Hsqoc Nosilnost na posamezno raven: 3.000 kg Število ravni za nalaganje: 6 kos Priporočena dolžina materiala: 6.000 mm Razdalja med stojali: 2 x 2.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za skladiščenje dolgih materialov s 3 stebri. - Vsaka polica se lahko zasuče navzven, kar vedno omogoča nakladanje in razkladanje z mostnim dvigalom. - Enostranska izvedba.

Stanje: novo, Nosilnost regala: 21.000 kg Nosilnost na nivo: 3.000 kg Število nivojev: 7 kos Chjdpfx Asfgyg Isiqsc Priporočena dolžina materiala: 6.000 mm Razmik stebričkov: 2 x 2.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov s 3 stebri. - Vsaka polica se lahko zažene navzven, kar omogoča nakladanje in razkladanje s halnim dvigalom kadarkoli. - Enostranska izvedba.

Stanje: novo, Nosilnost regala 10.000 kg Nosilnost na raven 2.000 kg Število nakladalnih ravni 5 kos Priporočena dolžina materiala 3.000 mm Razdalja med stebri 1.500 mm Višina regala 2.440 mm Mere D x Š x V 2,3 x 0,9(1,35) x 2,45 m Najbolj primerna rešitev za shranjevanje dolgih materialov z 2 stebroma. - Vsaka polica se lahko zasuka navzven, kar omogoča nakladanje in razkladanje s halnim žerjavom kadar koli. Cedpfxsfgyg Nj Aiqohc - Enostranska izvedba.

Stanje: novo, Nosilnost regala: 15.000 kg Nosilnost na nivo: 3.000 kg Število ravni nalaganja: 5 kosov Priporočena dolžina materiala: 6.000 mm Razdalja med stojali: 2 x 2.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov s 3 stebri. Codpfxofgyg Eo Aiqehc - Vsak predal je možno zavrteti navzven, tako da je možno nakladanje in razkladanje z mostnim žerjavom kadarkoli. - Eno-stranska izvedba.

Stanje: novo, Nosilnost regala: 14.000 kg Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 7 kosov Priporočena dolžina materiala: 3.000 mm Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Cjdpfx Aiofgyg Seqehc Dimenzije (D x Š x V): 2,3 x 0,9(1,35) x 2,45 m Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebri. - Vsaka polica se lahko zasuče navzven, kar omogoča nakladanje in razkladanje s halnim žerjavom kadar koli. - Enojstranska izvedba.

Stanje: novo, Nosilnost regala: 12.000 kg Nosilnost na polico: 2.000 kg Število nakladalnih nivojev: 6 kos Priporočena dolžina materiala: 6.000 mm Razmik med stebri: 3.000 mm Višina regala: 2.440 mm Dimenzije D x Š x V: 3,8 x 0,9(1,35) x 2,45 m Csdpfjfgyg Ajx Aiqohc Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebri. - Vsak predal se lahko iztegne navzven, kar omogoča nakladanje in razkladanje z mostnim dvigalom kadarkoli. - Enostranska izvedba.

Stanje: novo, Nosilnost regala: 12.000 kg Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 6 kos Priporočena dolžina materiala: 3.000 mm Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Chedpfx Asfgyg Rsiqec Dimenzije D x Š x V: 2,3 x 0,9(1,35) x 2,45 m Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebroma. - Vsaka polica se lahko zasuka navzven, kar omogoča nakladanje in razkladanje z mostnim dvigalom kadar koli. - Enostranska izvedba.

Stanje: novo, Load capacity (rack): 10,000 kg Load capacity per level: 2,000 kg Number of storage levels: 5 pcs. Recommended material length: 6,000 mm Upright spacing: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): 3.8 x 0.9 (1.35) x 2.45 m The most suitable solution for storing long materials with 2 uprights. - Each shelf can be swung outwards, allowing loading and unloading with an overhead crane at any time. - Single-sided design. Chsdefgygzopfx Aiqoc

Stanje: dober (rabljeno), Cantilever Rack, Heavy-Duty Racking - Cantilever rack: starter bay, double-sided, 2 uprights - Cantilever arms: 4 per side, length 500 mm - Shelf height: adjustable - Quantity: 2 racks available - Price: per unit Chodpfx Aior Ngpxeqjc - Dimensions: 1180/1195/H2960 mm - Weight: 139 kg / 140 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Cantilever rack, heavy-duty rack -Manufacturer: LBE, double-sided cantilever rack starter bay -Cantilever arms: 5 levels per side, length 500 mm -Shelf height: variably adjustable -Load capacity: 630 kg per side, see nameplate in photos -Quantity: 1 piece available Codpfx Aijtrzpwjqohc -Dimensions: 1300/1180/H1985 mm -Weight: 80 kg

Stanje: novo, Nosilnost regala: 20.000 kg Chedpfx Aiefgyhfoqec Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 2 x 5 kos Priporočena dolžina materiala: 3.000 mm Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Najprimernejša rešitev za skladiščenje dolgih materialov z 2 stebroma. - Vsak predal se lahko izmakne navzven, tako je nakladanje in razkladanje s halnim žerjavom vedno mogoče. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala: 30.000 kg Nosilnost na nivo: 3.000 kg Število nivojev za nalaganje: 2 x 5 kosov Priporočena dolžina materiala: 6.000 mm Razmak med stebri: 3.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov s 3 stebri. Csdpfsfgyhbox Aiqohc - Vsak predal se lahko zavrti navzven, kar omogoča vedno nakladanje in razkladanje z mostnim dvigalom. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala: 20.000 kg Nosilnost na nivo: 2.000 kg Csdpfx Aofgyg Tsiqshc Število nivojev: 2 x 5 kosov Priporočena dolžina materiala: 6.000 mm Razmak med stebri: 3.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebri. - Vsak predal je izven pomičen, kar omogoča natovarjanje in raztovarjanje z mostnim dvigalom kadarkoli. - Dvostranska izvedba.

Stanje: novo, Nosilnost regalnega sistema: 24.000 kg Nosilnost na nivo: 2.000 kg Število nakladalnih nivojev: 2 x 6 kosov Chodpfxofgyhgj Aiqjc Priporočena dolžina materiala: 3.000 mm Razmak med stebri: 1.500 mm Višina regala: 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov z 2 stebroma. - Vsak predal se lahko zasuče navzven, kar omogoča natovarjanje in raztovarjanje z mostnim dvigalom kadarkoli. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala 28.000 kg Nosilnost na nivo 2.000 kg Število nivojev 2 x 7 kosov Csdefgyhhspfx Aiqshc Priporočena dolžina materiala 3.000 mm Razmak med stebri 1.500 mm Višina regala 2.440 mm Najprimernejša rešitev za shranjevanje dolgih materialov z dvema stebroma. - Vsaka polica se lahko zasuka navzven, tako da je nakladanje in razkladanje z mostnim žerjavom vedno mogoče. - Dvostranska izvedba.

Stanje: novo, Nosilnost regala: 28.000 kg Nosilnost na nivo: 2.000 kg Število skladiščnih nivojev: 2 x 7 kos Priporočena dolžina materiala: 6.000 mm Razmak med stebri: 3.000 mm Chsdpfxefgyhao Aiqoc Višina regala: 2.440 mm Mere D x Š x V: 3,7 x 2,55 x 2,4 m Najprimernejša rešitev za skladiščenje dolgih materialov z 2 stebroma. - Vsak regalni predal je izmenljiv navzven, kar vedno omogoča nakladanje in razkladanje s halnim žerjavom. - Dvostranska izvedba.

Stanje: novo, Leto izdelave: 2025, Cantilever rack for light loads, single-sided, frame height 2m, rack length approx. 3m, 50cm deep arms, 200kg per arm, hot-dip galvanized – Brand new: Price ex location incl. loading: only €895 (net), plus packaging and freight. Chedpfx Asxbz Ddjiqsc Price per additional upright: €225 (net) Transport price on request! Manufacturer: Bruckamp Year of manufacture: Brand new Type: Super Light Set components: 4 uprights with 5 arms / 3 bays with connectors Upright spacing: approx. 1m Total assembly length: approx. 3m Rack height: 2m Base and arm depth: 500mm Robust construction – manufactured from IPE 100 profile with permanently welded arms spaced at approx. 330mm. Load capacity per upright: 1,000kg Load capacity per arm: 200kg Including floor anchors Including load capacity sign Description: 4 uprights at 1m axle dimension as a set including bolts. Key advantages: Easy assembly – the rack is designed for effortless installation. Versatile – whether in the garage, workshop, or small niches, the rack adapts flexibly. Safe & practical – the arms made of rectangular tubing are fitted with plastic caps to prevent injuries.

Stanje: novo, Load capacity, rack: 6600 kg Load capacity per level: 1100 kg Number of storage levels: 6 pcs. Recommended material length: 6000 mm Column spacing: 2 x 2000 mm Rack height: 2440 mm Compartment width: 800 mm The optimal solution for storing long materials with 3 uprights/columns. - Each compartment can be swung outwards, allowing for easy loading and unloading with an overhead crane at any time. - Single-sided design. Cjdpsfgyhijfx Aiqjhc - Compartment depth: 800 mm

Stanje: novo, Load capacity of rack: 14,000 kg Load capacity per level: 2,000 kg Number of load levels: 7 pcs. Chsdpfefgyg Djx Aiqsc Recommended material length: 6,000 mm Frame width: 3,000 mm Rack height: 2,440 mm Dimensions (L x W x H): 3.8 x 0.9 (1.35) x 2.45 m The ideal solution for storing long materials using 2 uprights. - Each compartment can be swung outward, allowing for loading and unloading with an overhead crane at any time. - Single-sided design.

Stanje: novo, Leto izdelave: 2020, Cantilever racking, single-sided, 6.30 m height, 1.20 m arms, 900 kg per arm — New —: Price ex works, including loading! 1 rack unit with 4 uprights: €3,732 (net)! Transport costs within Germany (excluding islands): €490 (net)! A galvanized cantilever racking system, consisting of: Single-sided uprights, approx. 6,300 mm high, hot-dip galvanized Base and arm depth: 1,200 mm, each with 3 height-adjustable arms Load capacity with load center at 600 mm: 900 kg per arm / 4,000 kg per upright With 4 uprights per arm level: 4 x 900 kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE100 Incl. horizontal and diagonal bracing, bay width = 1,300 mm, standard is 1.30 m. Other standard bay widths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a surcharge applies to the stated price! Custom sizes (other bay widths) are also available on request, but incur a surcharge and have longer lead times as they require custom fabrication! If you do not specify a different bay width, we will supply the racking with a standard width of 1.30 m. Chjdsfivg Sepfx Aiqjc In that case, the length of a racking row with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipped within Germany directly from Würth), excluding floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New – : Price ex works incl. loading! 1 racking unit with 4 uprights €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! Of course, by omitting or purchasing additional frames, you can configure longer or shorter racking units (also possible by varying the bay spacing); the example with 4 frames is merely the most common rack solution! A hot-dip galvanized cantilever racking system, comprising: Single-sided upright approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with load centre 600 mm: 500 kg per arm / 4,000 kg per upright With 4 uprights per storage level: 4 x 500kg = 2,000 kg Profiles: Uprights: IPE220, Arms: IPE 80 With longitudinal and diagonal bracing, bay spacing = 1,300mm; standard is 1.30m. Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! For bay spacings 1.50m and above, a small surcharge will apply to the stated price! Special sizes (other bay spacings) are also available on request, but incur extra charges and have a longer delivery time as they are custom manufactured! Cedpfofivg Rjx Aiqehc If you do not specify otherwise, we deliver the racking with a bay spacing of 1.30m. In this configuration, an installation with 4 uprights (3 bays) is approx. 4m in length. Delivery includes all bolts and nuts (dispatched within Germany by parcel directly from Würth), but excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Stanje: novo, Shelf load capacity: 42,000 kg Shelf load capacity per level: 3,000 kg Cedpfx Aefgyhdsiqshc Number of storage levels: 2 x 7 pcs Recommended material length: 6,000 mm Upright spacing: 3,000 mm Shelf height: 2,440 mm Dimensions (L x W x H): m The most suitable solution for storing long materials with 3 columns. - Each compartment can be swung outwards, allowing loading and unloading by overhead crane at any time. - Double-sided design.