Konzolni regal

SSI Schäfer Cantilever

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Nsdpfx Ajucfwpeqqowh

Stanje: novo, With the Brugger Power Split S22, we present a powerful vertical log splitter that impresses with a splitting force of 22 tons. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in terms of drive—either via electric motor or PTO shaft. The splitting process is performed with two speed stages, enabling fast and efficient wood processing. Key features: - 22T splitting force - Combination drive: 5kW electric motor & PTO drive - Weight: 335kg - Suitable for logs up to 110cm in length - Log lifter included - Two speed levels A log lifter is included in the scope of delivery, making it easier to handle heavy logs. An optional hydraulic winch is available, offering additional application possibilities and further simplifying work processes. With a maximum splitting length of 110 cm, the Brugger Power Split S22 provides the flexibility to process even larger pieces of wood effortlessly. A support table for shorter logs is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful wood splitting solution—be it for professional or private use. Prices: Nwjdpfx Aqotrlv Seqeh Power Split S22 = €2,670 Power Split S30 (30 tonnes) = €2,960 Support table for short logs = €125 4-way splitting wedge = €99 Hydraulic winch = €595 Contact us for your tailor-made quote!

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Nwodsdy Hm Djpfx Aqqsh Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) Nedpfxewbknbo Aqqjwh ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: rabljeno, Gearbox, bevel gearbox, worm gearbox - Gearbox: Worm gearbox, gear ratio: i = 1:30 - Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm - Dimensions: 150/145/H175 mm Njdpfjt Snwxsx Aqqowh - Weight: 5.1 kg

Stanje: novo, as well as other types, as a package Nwodsf Ddzqjpfx Aqqoh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments Nedpfx Ajh Ek Daoqqswh - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, 50 running meters Jungheinrich pallet racking, Type MPB, new stock Brand new, see pictures Height: 9 m Depth: 110 cm, blue Beam length: 2.7 m, yellow Beam load capacity per level: 3,000 kg Nwodpfjlp Ntgjx Aqqjh Asking price: €12,750 net ex-warehouse Offer includes: + 19 pcs pre-assembled frames, depth 110 cm, height 9 m + 144 pcs beams, length 2.7 m, 3,000 kg load/level + 288 pcs locking pins + 78 pcs concrete anchors Load capacity signage and documentation included. Additional accessories available in the accessory catalogue. Frames powder-coated blue, bracing galvanized. Heights from 3.5 m to 9 m available from stock. Field load: 12 tons. Beams powder-coated yellow. Goods are available from stock. Transport and assembly possible upon request. Inspection available at any time by appointment. Further information on request. Always over 5,000 running meters of pallet racking in stock from various manufacturers. (Subject to change and errors in technical data, details, and pricing; interim sale reserved! See our terms and conditions, all prices excl. VAT ex-warehouse.) Purchasing/Sales: We are constantly looking for and offering various items from all sectors. Professionally swept industrial clearances Company liquidations Fast - flexible - efficient! We also clear and/or dispose of assets for insolvency administrators. Please contact us with a few key details—we will respond promptly. To visit our website, please click on our logo!

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program Nwodpfsiu Smbjx Aqqoh 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Nwjdpfjf Tv T Nsx Aqqeh Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!