Zajeralna žaga Graule ZS200N

Graule Abläng und Gehrungssäge ZS 200N 5KW mit ESF 1

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Cgodok H Ic Uspfx Afnsp Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Cgsdpsizkhvefx Afnep Machine height: 1550 mm Weight:

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Cgjdpfx Afsvwfqqjnjp Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, delovna višina: 900 mm, pogonska enota žage: 7.500 W, pivoting chainsaw at 45° equipped with a 6-meter pusher unloading deck with 6-strand loading chains for faster loading Cjdpfx Aowzg E Nefnjgp machine overhauled and fitted with a new digital touchscreen

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An inspection on site is possible. Cjdpjurwy Aefx Afnjgp

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 120 kg Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt Cgsdpfsxabztox Afnsp - Dual-sided miter adjustment (60° / 45°) with fixed stops - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Cgedpfewtgcxox Afnsp Condition: used

Stanje: novo, as well as other types, as a package Csdpfof Ddzqex Afnsgp

Stanje: dober (rabljeno), Leto izdelave: 2020, Rotor diameter 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Technical data available on request Required space approx. 2050 x 1550 mm Cedpfx Afewzaizenjgp All information provided without guarantee

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Cgedpfx Ajucfwpjfnep