Črpalke Sauer, Sauer - Siro - Črpalke

Sauer - Siro - Sundstrand

Stanje: kot nova (razstavni stroj), Used/refurbished hoist motor for a DH wire rope hoist ATTENTION! We have more than 15,000 Demag parts in stock. For further information, please visit our website or see our other listings. Godpfxoh Up U De Ahmobn

Stanje: generalkompletno obnovljen (rabljeno), Leybold Ruvac WAU1001 Roots Vacuum Pump is, after complete overhaul: - absolutely like new - checked according to manufacturer specifications, ensuring all clearances and dimensions are within tolerances - fitted with new wear parts Gbedpfx Ahefq D Hvomen - available at short notice - includes one-year warranty

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Gbsdsx Af Rdspfx Ahmjn Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet - CE compliant The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Gbodpfx Aheucfwpomon

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Godpsdy Hm Defx Ahmobn Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. Godpfeh Ek Daox Ahmjbn We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D91402707010001/2013, skupna masa: 1.500 kg, Moteur électrique à vendre Description conformément à la plaque signalétique (voir photos) Vente uniquement dans les États membres de l'UE ! Pas de vente privée. Le moteur électrique peut être inspecté sur rendez-vous. Toute garantie est exclue. Gbjdswittpspfx Ahmsn Nous déclinons toute responsabilité quant à l'exactitude des données techniques et de l'année de fabrication, à l'exhaustivité des accessoires et des équipements, ainsi qu'au respect de toutes les exigences de sécurité et de protection de l'environnement mentionnées dans les réglementations relatives à la prévention des accidents.

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Gjdpsiu Smbjfx Ahmobn Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: zelo dobro (rabljeno), Double pump for Krauss Maffei machines Voith Rexroth 3-stage variable displacement pumps Gedpeg I Uycofx Ahmsbn Type: SY2DFE1-21/071-071 KM No.: 6441936 MNR: R900751978 Photos are sample illustrations; pumps may vary in color!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Krauss Maffei KM 250-900B Clamping force: 250 tonnes Year of manufacture: 1987 Shot weight: 470 g Tie bar spacing: 630 x 560 mm Gsdjfp U Hvopfx Ahmobn