Long goods shelves

GUSTOS D-5-S-2-2000

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Longitudinal Slitting and Sheet Cutting Machine FORSTNER nuSLIT, year 2025. The machine is in excellent condition and fully operational. It was used at several exhibitions and in a demo center. This machine is designed for longitudinal slitting and sheet cutting. It is fully programmable, and the slitting knives are automatically adjustable. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to install up to 7 pairs. Equipped with a modern F3 control system with touch screen, allowing easy programming of various lengths, widths, and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and provides a perpendicular, clean cut. Integrated material-saving function – the machine stops, raises the slitting knives, and the sheet is automatically fed into the shears. Complete technical documentation included. Specification: Model: FORSTNER nuSLIT 1250 Country of manufacture: Austria Year: 2025 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Bsdjy Dfnnjpfx Am Eslp Cutting: rotary shears Controller: F3 Other: longitudinal slitting knives automatically adjustable If you have any further questions, we will be happy to assist you.

Stanje: novo, Table length 330 mm Table width 220 mm X-travel 210 mm Bledpfsupw Twjx Am Esp Y-travel 125 mm Table height 150 mm T-slots 12 mm Weight 33 kg Dimensions (L x W x H) 0.41 x 0.35 x 0.22 m Cross table with rotary plate

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, uporabna prostornina rezervoarja: 25.000 l, Emnet: AV-12176 – Vertikal Isoleret Tank 25.000 L Udvendige mål: Diameter Ø 2550/2700 mm, total højde 7000 mm. Vertikal isoleret tank, 25.000 L. Isoleret med 50 mm mineraluld og beklædt med rustfri trapezplade. Konisk top med ventilation/CIP-tilslutning. Konisk bund med 3" udløb. Mandhul i den nederste del af cylinderen. Bsdpfxouwdhlo Am Eolp Kraftig topmonteret omrører. Materiale: AISI 904L rustfrit stål.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm Blsdpfxomhhypo Am Eep - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" Blodpfxetwb U As Am Eep The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! Bedpfxsf Tv T Nj Am Ejlp 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: novo, Bernardo Workshop Press WK 20 FH Pro Technical Specifications Pressing force: 20 t Piston stroke: 185 mm Table width: 170 mm Clearance (E): 510 mm Clearance (F): 130 mm Distance cylinder - table (F1): 40 mm Distance cylinder - table (F2): 965 mm Lateral cylinder travel (M): 175 mm Width (A): 730 mm Depth (B): 560 mm Height 1 (C): 1525 mm Height 2 (D): 1630 mm Weight approx.: 112 kg Features • Supplied as standard with left and right traversable pressure cylinder • Suitable for aligning, pressing, bending, assembling gears, discs, etc. • Standard equipment includes foot pedal and hydraulic hand pump for piston feed Bsdpfx Aed Du T Rsm Eelp • Supplied with V-block for aligning shafts • Automatic piston return via integrated return spring as standard • Height-adjustable press table with locking pin • Large, easy-to-read pressure gauge • Includes two-stage hydraulic pump • Robust design thanks to welded steel frame

Stanje: novo, Table diameter: 330 mm Table load capacity: 350 kg Swivel range: 135 degrees Tilt adjustment: manual / machine: manual Max. rotation speed: 5 rpm, stepless Vertical table load capacity: 120 kg Total power requirement: 0.125 kW Machine weight: approx. 52 kg Required space: approx. 640 x 490 x 630 mm Welding positioner with: - Foot switch - Manually tiltable and swivellable - Steplessly adjustable speed Bledpfx Ash D Svgem Eop - 250 ampere welding current transmission - Borehole in faceplate: 40 mm.

Leto izdelave: 2021, stanje: novo, Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex works, loading included! Bedpfxjfivhfj Am Eolp 1 racking unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! You can also build longer or shorter racking units by omitting or purchasing additional frames (or by changing the bay spacing); this example with 4 frames is simply the standard racking solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized IPE 160 / 100 profile with 2x3 adjustable arms of 1.20 m length per upright, 750kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, with 3 height-adjustable arms per side Load capacity at load center 600 mm: 750kg per arm / 2,250kg per upright side With horizontal and diagonal bracing, bay spacing e = 1300 mm; standard is 1.30m Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m an additional surcharge applies to the listed price! Special measurements (other bay spacings) are available upon request, incurring a surcharge and longer delivery time as they need to be custom manufactured! If no different bay spacing is specified, we supply the racking with a bay spacing of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipped within Germany directly by Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types etc.) available! Please contact us!

Stanje: rabljeno, Stroj za kontinuirno litje Bledpfx Amsxixkwo Ejp