Konzolni regal

Kragarmregal einseitig Höhe: 2.600 mm Nutztiefe: 1.000 mm / Länge: 4.000 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Podsmhh Dzjpfx Anporc Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 3.278-870805-1, Part no.: 42.35.53 Podpfxjh Eii To Anpjrc Technical data and description: see images

Stanje: novo, Cutting diameter: 355 mm Saw blade dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20 - 80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Supply voltage: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Prodpfxomhm Aqe Anpec Semi-automatic Mitre Bandsaw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vise with quick-release device - Band tension control via manometer - Electric coolant system

Stanje: novo, Leto izdelave: 2025, Manual operation with our ultrasonic cleaning technology, featuring an analogue control panel and temperature regulation via a digital thermostat. PRO-series functions can optionally be added. We offer tank capacities from 60 to 7,500 L to meet all requirements. Tank capacity: 110 L External dimensions: 1970 x 670 x 970 mm Usable basket dimensions: 550 x 350 x 250 mm Psdpfx Ajf Hqavjnperc Ultrasonic frequency: 40 kHz Ultrasonic power: 1,000 W

Stanje: rabljeno, System: Mobile dewatering unit, decanter, mobile centrifuge – used Application area: Sludge dewatering Pjdpfxowmwrqs Anperc Type: Alfa Laval DSNX 4250 Year of manufacture: 1996 Operating hours: 29,200 Generator operating hours: 31,640, see attached nameplate

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 12.500 h, številka stroja/vozila: EWADC22C-XS003, hladilna zmogljivost: 2.000 kW (2.719,24 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: zrak, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): 35 °C, TEHNIČNI PODATKI Pedeuma Thjpfx Anpjrc Blagovna znamka: DAIKIN Model: EWADC22C-XS003 Hladilna zmogljivost Hladilna moč: 1933 kW Hladilna moč (Kcal/h): 1.720.000 Kcal/h Razmerje energetske učinkovitosti (EER): 2,63 Sezonsko razmerje energetske učinkovitosti (ESEER): 4,02 IPLV (vrednost integrirane delne obremenitve): 4,47 Uparjalnik Tip: Lupina in cev (direktna ekspanzija) Maks. obratovalni tlak na vodni strani: 10 bar Volumen vode: 850 litrov Nazivni pretok vode: 92,2 l/s Temperatura vstopa/izstopa vode: 12,0°C / 7,0°C Premer priključka: 273 mm Izolacijski material: Zaprto-celični Kondenzator Tip: Aluminijaste lamele, notranje rebraste bakrene cevi Tip ventilatorja: Propeler, ojačan s steklenimi vlakni Premer ventilatorja: 800 mm Število ventilatorjev: 30 Moč ventilatorskega motorja: 52,5 kW Hitrost ventilatorja: 900 min⁻¹ (rpm) Nazivni pretok zraka: 160.327 l/s Kompresor Tip: Asimetrični enojni vijačni, polhermetičen Model: 3 x HSA2690524 Količina: 3 Polnjenje olja: 75 litrov Način krmiljenja: Brezstopenjska modulacija (25 % – 100 %) Način zagona: zvezda-trikot (Y-Δ) Hladilno sredstvo Tip: R-134a Polnitev: 360 kg Število krogotokov: 3 Mere in teža Širina: 2.285 mm Dolžina: 14.785 mm Višina: 2.540 mm Teža enote: 12.600 kg Obratovalna teža: 13.470 kg Električne specifikacije Napetost: 400V / 3 faze / 50 Hz Dovoljena toleranca napetosti: 10 % Nazivni delovni tok: 1.100 A Maks. zagonski tok: 1.486 A Maks. tok za dimenzioniranje vodnikov: 1.608 A Krmiljenje in avtomatika Krmilna omara: MicroTech III Oddaljeno nadzorovanje: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Natančnost regulacije temperature: 0,1°C Napredna zaščita: Visok/nizek tlak, tlak olja, temperatura motorja, zaščita proti zmrzovanju, nadzor faz Glasnost Zvočna moč: 104 dB(A) Zvočni tlak: 81 dB(A) pri 1 metru oddaljenosti

Leto izdelave: 2026, stanje: novo, Technical specifications: - Rated capacity: 2000 L/h - Power requirement: 0.5 kW, 230 V, 6 A, single phase - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 550 x 1075 x 350 mm - Weight: 50 kg - IP65 electronics Prsdpfx Asfhb I Hsnpsc - Stainless steel pump with food-grade rubber scrapers - Fully automatic - Connection: DN 65 - Minimal maintenance - The machine can be operated either fully automatically or manually. - Compatible with all Maurer presses.

Stanje: rabljeno, Leto izdelave: 2021, Ponujamo naslednji rabljeni, izolirani fermentacijski rezervoar DME 40HL, izdelan leta 2021. Proizvajalec: DME Model: 40HL Datum izdelave: 23. 06. 2021 Podpeza Twnsfx Anperc Serijska številka: B5715-30-03 Leto izdelave: 2021 Stanje: rabljeno Tip: 40HL izolirani fermentacijski rezervoar Če imate kakršna koli vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Cena je za en kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Na voljo je ABB robot v originalni embalaži. Nosilnost: 180 kg, doseg: 3150 mm, teža: cca 1750 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Podpfx Anexwyw Uepjrc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) Prsdpfomhhypjx Anpsc - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.