Težka polica

Kragarmregal einseitig Höhe: 2.600 mm Nutztiefe: 1.000 mm / Länge: 4.000 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Prsdomhhyajpfx Anpjc - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 3.278-870805-1, Part no.: 42.35.53 Technical data and description: see images Prjdpfx Aoh Eii Tjnpjc

Stanje: novo, Leto izdelave: 2025, Manual operation with our ultrasonic cleaning technology, featuring an analogue control panel and temperature regulation via a digital thermostat. PRO-series functions can optionally be added. We offer tank capacities from 60 to 7,500 L to meet all requirements. Psdpfx Aof Hqavsnpsrc Tank capacity: 110 L External dimensions: 1970 x 670 x 970 mm Usable basket dimensions: 550 x 350 x 250 mm Ultrasonic frequency: 40 kHz Ultrasonic power: 1,000 W

Stanje: rabljeno, Leto izdelave: 2021, Ponujamo naslednji rabljeni, izolirani fermentacijski rezervoar DME 40HL, izdelan leta 2021. Proizvajalec: DME Psdpfx Ajza Twnsnperc Model: 40HL Datum izdelave: 23. 06. 2021 Serijska številka: B5715-30-03 Leto izdelave: 2021 Stanje: rabljeno Tip: 40HL izolirani fermentacijski rezervoar Če imate kakršna koli vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Cena je za en kos.

Stanje: rabljeno, System: Mobile dewatering unit, decanter, mobile centrifuge – used Psdpfswmwrqsx Anporc Application area: Sludge dewatering Type: Alfa Laval DSNX 4250 Year of manufacture: 1996 Operating hours: 29,200 Generator operating hours: 31,640, see attached nameplate

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 12.500 h, številka stroja/vozila: EWADC22C-XS003, hladilna zmogljivost: 2.000 kW (2.719,24 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: zrak, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): 35 °C, TEHNIČNI PODATKI Blagovna znamka: DAIKIN Model: EWADC22C-XS003 Hladilna zmogljivost Hladilna moč: 1933 kW Hladilna moč (Kcal/h): 1.720.000 Kcal/h Razmerje energetske učinkovitosti (EER): 2,63 Sezonsko razmerje energetske učinkovitosti (ESEER): 4,02 IPLV (vrednost integrirane delne obremenitve): 4,47 Uparjalnik Tip: Lupina in cev (direktna ekspanzija) Maks. obratovalni tlak na vodni strani: 10 bar Volumen vode: 850 litrov Nazivni pretok vode: 92,2 l/s Temperatura vstopa/izstopa vode: 12,0°C / 7,0°C Premer priključka: 273 mm Izolacijski material: Zaprto-celični Kondenzator Tip: Aluminijaste lamele, notranje rebraste bakrene cevi Tip ventilatorja: Propeler, ojačan s steklenimi vlakni Premer ventilatorja: 800 mm Število ventilatorjev: 30 Moč ventilatorskega motorja: 52,5 kW Hitrost ventilatorja: 900 min⁻¹ (rpm) Nazivni pretok zraka: 160.327 l/s Kompresor Tip: Asimetrični enojni vijačni, polhermetičen Model: 3 x HSA2690524 Količina: 3 Polnjenje olja: 75 litrov Način krmiljenja: Brezstopenjska modulacija (25 % – 100 %) Način zagona: zvezda-trikot (Y-Δ) Hladilno sredstvo Predpfx Aneuma Thjpoc Tip: R-134a Polnitev: 360 kg Število krogotokov: 3 Mere in teža Širina: 2.285 mm Dolžina: 14.785 mm Višina: 2.540 mm Teža enote: 12.600 kg Obratovalna teža: 13.470 kg Električne specifikacije Napetost: 400V / 3 faze / 50 Hz Dovoljena toleranca napetosti: 10 % Nazivni delovni tok: 1.100 A Maks. zagonski tok: 1.486 A Maks. tok za dimenzioniranje vodnikov: 1.608 A Krmiljenje in avtomatika Krmilna omara: MicroTech III Oddaljeno nadzorovanje: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Natančnost regulacije temperature: 0,1°C Napredna zaščita: Visok/nizek tlak, tlak olja, temperatura motorja, zaščita proti zmrzovanju, nadzor faz Glasnost Zvočna moč: 104 dB(A) Zvočni tlak: 81 dB(A) pri 1 metru oddaljenosti

Stanje: zelo dobro (rabljeno), Dexion P90 pallet racking systems for warehouses. Racks in very good condition. We currently offer approximately 30,000 pallet spaces. Frames available in the following heights: 6000/1100 mm – 98 EUR Prodpfehq Dd Tsx Anpoc 7000/1100 mm – 115 EUR 8000/1100 mm – 130 EUR 9000/1100 mm – 147 EUR Beams: BX 120/40/13/2700 mm, capacity 2400 kg – 17 EUR each BX 100/50/15/2700 mm, capacity 2850 kg – 18 EUR each BX 60/40/13/2700 mm, capacity 900 kg – 14 EUR each Invoices are issued. We invite you to cooperate with us.

Leto izdelave: 2026, stanje: novo, Technical specifications: - Rated capacity: 2000 L/h - Power requirement: 0.5 kW, 230 V, 6 A, single phase - Material: Wnr. 1.4301, AISI 304 stainless steel Prsdpfx Anofhb I Hopec - Dimensions: 550 x 1075 x 350 mm - Weight: 50 kg - IP65 electronics - Stainless steel pump with food-grade rubber scrapers - Fully automatic - Connection: DN 65 - Minimal maintenance - The machine can be operated either fully automatically or manually. - Compatible with all Maurer presses.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Na voljo je ABB robot v originalni embalaži. Nosilnost: 180 kg, doseg: 3150 mm, teža: cca 1750 kg. Dokumentacija je na voljo. Možen je ogled na lokaciji. Podpfxoxwyw Uo Anporc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) Predpfemhhypox Anpec - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.