Chiron nakup rabljenega (106)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
CHIRON
Dražba
Se konča čez
d
h
min
s
Dražba zaključena
Baden-Württemberg
459 km
5-osni univerzalni obdelovalni center
ChironMill 800
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 500 mm, pomik po osi Z: 550 mm, model krmilnika: Fanuc 18i MB5, največja hitrost vrtenja: 20.000 obr/min, DÉTAILS TECHNIQUES
Course axe X : 800 mm
Course axe Y : 500 mm
Course axe Z : 550 mm
Broche principale
Type : HSK-A63
Vitesse max. : 20 000 tr/min
Broche de tournage
Mandrin à pinces : Hainbuch SK65 BZI
Vitesse max. : 4 000 tr/min
Passage : env. 65 mm
DÉTAILS MACHINE
Commande : Fanuc 18i MB5
Puissance d’entraînement min. : 30 kVA
Puissance d’entraînement max. : 50 kVA
ÉQUIPEMENT
Système de mesure d’outil Blum Laser Controll NT
Magasin supplémentaire (92 emplacements outils)
Installation de refroidissement / filtre à bande papier / arrosage haute pression (IKZ)
Refroidisseur de broche
Chargeur de barres Breuning RBK 10012
Jeux de pinces : 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, diamètre max. : 60 mm
Merci de noter : sans extraction de brouillard d’huile, sans système d’extinction CO₂.
Fpsdpjyn Ncpsfx Abvsd
Le démontage de la machine sera effectué le 24/03/2026 par la société Chiron. Chiron effectuera également une sauvegarde des données.
Mali oglas
Nemčija
614 km
Obdelovalni center - univerzalni - 5 osi / 5 Axis
CHIRON - WERKE GMBH &Mill 800 FA
Pokliči
Stanje: rabljeno, Leto izdelave: 2010, Technical Details:
X-axis travel: 800 mm
y-axis travel: 685 mm
z-axis travel: 630 mm
C-axis: 360° (faceplate table)
Control system: Siemens 840D Power Line
Spindle speed: 10,500 – 20,000 rpm
Spindle torque: 180 Nm
Tool holder: HSK-A63, DIN 69893
Tool magazine with: 40 positions
Number of tables: 2
Table swivel range +/-: 120° each (A-axis)
Table clamping surface: 280 x 275 mm
Table load capacity: 320 kg
Interface: RS232
Spindle operating hours: 38,700 h
Total power requirement: 37 kW
Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m
Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m
Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m
CNC machining center – 5-axis machining center
Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm)
Max. workpiece size 940 x 650 mm for/on table
with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009
Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009
Both control cabinets equipped with Rittal cooling units
Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately.
i.D.
Fpsdpoytcf Ujfx Abvjd
*
Klik
Dražba zaključena
Emmingen-Liptingen
506 km
Vertikalni CNC obdelovalni center z napravo za menjavo obdelovancev
CHIRONFZ 15 W
Leto izdelave: 2021, obratovalne ure: 9.159 h, stanje: rabljeno, številka stroja/vozila: 374-19, Dokumentacija je priložena v PDF-ju.
Fedpfxsyn Ni Ns Abvepd

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Klik
Dražba zaključena
Emmingen-Liptingen
506 km
Vertikalni CNC obdelovalni center z napravo za menjavo obdelovancev
CHIRONFZ 15 W
Leto izdelave: 2021, obratovalne ure: 16.807 h, stanje: rabljeno, številka stroja/vozila: 374-20, Dokumentacija je priložena v PDF-ju.
Fpedpfx Aboyn Nkaevod
Mali oglas
Nemčija
653 km
CHIRON FZ 08K S Magnum SK
CHIRONFZ 08K S Magnum SK
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 22.500 h, potovalna razdalja osi X: 450 mm, pomik osi Y: 270 mm, pomik po osi Z: 310 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, največja hitrost vretena: 15.000 obr/min, število osi: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It is equipped with a Siemens 840D control unit and offers impressive travel ranges of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine features a 40-position tool changer and a high-pressure coolant system. If you are looking for advanced machining capabilities, you should consider the CHIRON FZ 08K S Magnum SK vertical machining center we have available for sale. Please contact us for further details.
• Overhauled: Factory-refurbished and technically upgraded by Chiron (CMS) in 2017
• Last spindle replacement: September 2025
• Last maintenance: Major annual service (4,000 h) in October 2025
Fpedoypb Tpjpfx Abvod
• NC swivel head range: -20° / +115°
• Rapid traverse X/Y/Z: 75 m/min
• Acceleration X/Y/Z: 1g / 1.5g / 2g
• Tool changer: 40 positions, HSK-A40
• Chip-to-chip time: 2.6 s (vertical)
• Rotary table: AWU 160 with D105 mm positioning axis
• Operating hours: Approx. 22,500 h
Additional equipment
• Workholding: Hainbuch Spanntop D100 collet chuck
• Bar feeder: IRCO SiMag 100.1-3000 for round and profile material
• High-pressure coolant: 70 bar with Vario valve
• Coolant filtration: Knoll VRF, 400-liter vacuum rotary filter
• Chip conveyor: Scraper belt, 1,050 mm discharge height
• Measuring/monitoring: Renishaw TS27R 3D probing system; tool life monitoring; tool breakage control
• Collision monitoring: Brankamp Marposs CMS 100
• Guide channel sets: Breuning IRCO sets included (subject to agreement)
• Collets: Hainbuch collets included (subject to agreement)
• Tool holders: Approx. 500 pcs. HSK-A40
• Spare parts: Included for this machine type
• Operating supplies: Specific operating media/materials included
Mali oglas
Italija
653 km
CHIRON FZ18W
CHIRONFZ18W
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 800 mm, pomik osi Y: 530 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-B5, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.000 W, teža orodja: 8.000 g, število osi: 5, This 5-axis CHIRON FZ18W was manufactured in 2019 and features a FANUC 31i-B5 control with continuous 5-axis operation. The machine offers a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. With its automatic pallet changer and two rotary tables, it is ideal for complex machining applications. If you are looking for a high-quality milling machine, consider the CHIRON FZ18W we have for sale. Please contact us for further information.
• Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table)
• Spindle:
• AC spindle motor: 7.5 kW (100% duty cycle), 22.0 kW (10% duty cycle)
• Maximum torque: 140 Nm
• Taper: HSK-A63 (DIN 69893)
• Drilling capacity: Ø 42 mm
• Tapping capacity: M30
• Milling capacity: 500 cm³/min (steel E355)
• Tool changer:
• Type: Fully enclosed chain magazine
• Capacity: 70 tools
• Max. tool diameter: 78 mm (160 mm with empty adjacent pockets)
• Max. tool length: 380 mm
• Max. magazine load: 240 kg
• Tool change time: ~0.9 s
• Chip-to-chip time: ~2.6 s
• Feed rates & dynamics:
• Rapid traverse (X/Y/Z): 75 m/min
• Acceleration: 0.6 - 1.2 - 1.4 g
• Drives: Digital direct drives with absolute measuring system
• Machine features/auxiliary equipment:
• Automatic flushing of work area and fixtures
• Automatic centralized grease lubrication
• Hydraulic unit: 200 bar
• Compressed air conditioning with filtration to 0.01 µm
• Cooling unit for machine components
• Measurement, monitoring, software:
• FANUC 3D collision check
• Tool monitoring and sister tool management
• Electrical & interfaces:
• Ethernet RJ45, USB, PCMCIA
• Remote diagnostics: CHIRON remoteLine
• Data monitoring & OEE: CHIRON dataLine
• Compliance: CE
Additional equipment (robotics, automation, peripherals)
• Automation/palletizing:
• Automatic pallet changer IWV 0°/180° (changeover time ~3.5 s)
• Rotary table ATU 200, 2 units
• Positioning accuracy/repeatability: ±5″
• Max. clamping torque: 1,200 Nm
• Max. load per side (APC): 250 kg
• Max. weight difference between pallets: 0 kg
• Coolant and chip management:
• Through-spindle coolant (prepared)
• High-pressure coolant system up to 30 bar
• Coolant filtration: drum filter TPF 350 S (50 µm)
• Chip conveyor: hinged belt design
• Coolant tank: 230 L
• Pump: 250 L/min @ 1.4 bar
Fpsdjyaz Emjpfx Abvod
• Probing/tool control:
• Renishaw RLP40Q probe (prepared)
• Laser tool breakage control (Single F1000)
Mali oglas
Nemčija
653 km
CHIRON Mill 2000 High Dynamics
CHIRONMill 2000 High Dynamics
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 29.688 h, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SL, skupna višina: 1.350 mm, skupna masa: 110 kg, največja hitrost vretena: 20.000 obr/min, moč vretenovega motorja: 60.000 W, število osi: 4, This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It is equipped with a single spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers an X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse rates of 75 m/min. Take advantage of this opportunity and purchase this CHIRON Mill 2000 High Dynamics vertical machining center. Contact us for further information about this machine.
Additional Equipment
• Rated pressure: 200 bar
• Test pressure: 260 bar
• Temperature range: -10 to 120 °C
• Bypass opening pressure: 7 bar
• Differential pressure indicator: 5 bar
• Maximum voltage (AC): 250 V // Maximum voltage (DC): 200 V
• Maximum switching current: 1 A
• Switching capacity: 70 W
• Protection class: IP 65
• Weight: 37 kg
• Lubrication: Oil-air
• Maximum oil tank temperature for hydraulic fluid: 55°C
Machine Benefits
Technical Advantages of the Machine
• Main spindle max. torque: 75 Nm
• Spindle head version: single spindle
Additional Information
No swiveling spindle head. Cooling device for control unit: Dimensions: 400 mm (W) x 950 mm (H) x 260 mm (D)
Set flow rate: 40 l/min; Outlet pressure at 50 Hz: 4.0 bar; Rated power: 1.5 kW; Max rated current: 4.1 A
Unit: Dimensions: 600 mm (L) x 600 mm (W) x 1350 mm (H); Weight: 110 kg; Rated connected load: 4.60 kW; Max rated current: 9.20 A;
Fsdpfox D Dr Aox Abvopd
Maximum fuse protection: 16 A
Table rotary table: Transport load without counter bearing: 300 kg; Max. axial load: 9000 N; Max. radial load: 40000 N; Max. tilting moment: 2000 Nm; Max. transferable torque from worm to worm gearbox: 30 Nm
Counter bearing: Transport load for vertical use with NC rotary table 1.03: 600 kg; Required clamping pressure of the hydraulic fixture (rated pressure): 75 bar; Permissible clamping pressure of the hydraulic clamp: 85 bar; Permissible peak pressure of the hydraulic clamp: 120 bar;
Permissible tangential moment with hydraulic clamp: 1000 Nm
Dimensions
Machine depth: 600 mm
Mali oglas
Nemčija
653 km
CHIRON DZ18W
CHIRONDZ18W
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, potovalna razdalja osi X: 630 mm, pomik osi Y: 530 mm, pomik po osi Z: 450 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D solution line, število osi: 3, This 3-axis CHIRON DZ18W was manufactured in 2018. Ideally suited for vertical precision machining, this model offers a robust construction and reliable performance. Consider purchasing this CHIRON DZ18W vertical machining center. Contact us for further information.
Fpsdpfox D Nmfox Abvod
Additional Equipment
• OPTIONAL: Robot, complete cell with conveyor belts, PLC, rotary station
Machine Advantages
Technical Advantages
• Tool positions: 2x35
• Maximum tool length: 380 mm
Additional Information
Splash guard with fully enclosed work area /
with loading door, electrically secured /
with replaceable safety windows /
working area partition with stainless steel slats /
height 2,340 mm above floor, including machine lighting /
mini control panel with start and reset button for M61/M62 pallet organization /
integrated workpiece changer IWW 0/180° /
for optimal chip flow with central partition made of sheet steel /
workpiece change time approx. 3.5 seconds, weight-dependent, self-regulating /
through self-learning speed control /
transport load per side 0 – max. 250 kg /
max. 120 kg weight difference between both table sides.
Each table side is prepared for the installation of a rotary table kit.
Distance between spindle holder and pivot point /WW at least 75 mm /
Travel axes:
X-axis 630 mm /
Y-axis 530 mm /
Z-axis 450 mm /
Tank flushing system with coolant connection /
NC rotary table, type ATU 200 /
integrated into the integrated workpiece changer IWW 0/180° /
with hydraulic clamping, holding torque 1,200 Nm /
repeatability +5” with /
faceplate Ø 225 mm, with centering Ø 60 -0.008 /
counter bearing with hydraulic clamping, holding torque 800 Nm /
on the rotary table and counter bearing side. Swivel radius 285 mm /
7th or 5th NC axis, plug-in ready /
regulated pneumatic connection for purge air /
regulated hydraulic connection for clamping /
rotary union 2 x 5-fold /
rotary table side: 4 x hydraulic/pneumatic, 1 x pneumatic /
4 x hydraulic/pneumatic on the counter bearing side, 1 x pneumatic /
Working area - rotary table configuration /
AF1 rotary table ATU 200 /
AF2 rotary table ATU 200 /
dual-spindle headstock /
prepared for the installation of two main spindle motors with spindles /
spindle distance on X-axis 400 mm /
main spindle drive with 2 AC motors /
pneumatic, with tool clamp monitoring /
11.0 kW at 100% duty cycle /
25.3 kW at 15% duty cycle /
Speed up to 12,000 rpm /
Max. torque 140 Nm /
drilling capacity 2 x 42 mm /
in steel E355 /
automatic tool changer /
with robust, fully enclosed pick-up chain magazine /
2 x 35 tool stations /
HSK-A 63 DIN tool holder 69893 /
max. tool width 78 mm /
tool width with free adjacent stations max. 140 mm /
max. tool length 380 mm /
max. tool weight 8.0 kg (max. magazine load 240 kg) /
tool change time approx. 0.9 s (control dependent) /
chip-to-chip time approx. 2.2 s (control dependent) /
feed drive for X, Y, and Z axes /
digital drives with direct position feedback, overpressure system /
rapid traverse speed 75 – 75 – 75 m/min /
axis acceleration 1.0 – 1.4 – 1.6 g /
SIEMENS CNC control 840D solution line /
including 10.4" TFT color display / full keyboard / control panel OP010S /
12801 (TCU / NCU 720.3, 1 channel) /
user interface Operate /
NC RAM 3 MB (max. 1 MB available) /
(max. 200 programs available) /
for executing machining programs according to DIN 66025 /
CF card with 8 GB memory capacity (max.
Mali oglas
Nemčija
653 km
CHIRON Mill 6000 SK
CHIRONMill 6000 SK
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: n/a, število osi: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004 and features a high-speed motor spindle with 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It is equipped with a 5-axis milling package, 92 tool stations, and a Marposs collision monitoring system. Ideally suited for machining long parts up to 6,000 mm and pendulum machining. If you are looking for a high-quality milling machine, you should consider the CHIRON Mill 6000 SK we have for sale. Contact us for further information.
Machine advantages
Technical machine advantages
• 92 tool positions HSK-A63 (background magazine)
• Long-part machining up to a maximum of 6,000 mm
• Face machining (5th side) horizontally with swivel head (right/left)
• Pendulum machining with central divider, max. workpiece length 1,773 mm with face machining on both ends (tool length 120 mm)
• 4 hydraulic double vices (fixed center jaw) per pendulum field, positioning and clamping via linear system (hydraulic release, mechanical clamping)
Additional Information
Additional Equipment
High-speed package with motor spindle: 12,000 rpm, 140 Nm
Production package:
Scraper belt conveyor, discharge height 1,050 mm
Internal coolant preparation
KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass)
High pressure 70 bar with high-pressure pump and control valve
Rinsing gun per pendulum field
Emulsion mist extraction, 2 fans each 800 m³/h
Rotatable viewing window left and right (1,400 mm from machine center)
Automatic loading doors
Central divider for pendulum machining
5-axis milling package
Air blow-off
Tool life monitoring
Additional V24 RS232 in the control cabinet
BDE/MDE interface (statuses: machine on, machine running, parts counter)
Marposs (Brankamp) CMS100 collision monitoring system
3D machine model for kinematic simulation in the CAM programming system
210 bar hydraulic unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control
KOHN linear clamping system
Fpjdpjx Nr Irjfx Abvjd
8 hydraulic vices KOHN Multi 2000 MFS 125/680 HD
Two-part operator stand across the entire working width of 6,000 mm
With the 3 axes x, y, z and the swivel head, forms such as curves can be milled with the 5-axis milling software package. The software then synchronizes the axes.
Mali oglas
Nemčija
653 km
Chiron FZ 12 KW
CHIRONFZ 12 KW
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, potovalna razdalja osi X: 550 mm, pomik osi Y: 320 mm, pomik po osi Z: 360 mm, obremenitev mize: 500 kg, največja hitrost vretena: 12.000 obr/min, teža orodja: 5.000 g, število osi: 3, This 3-axis vertical machining center CHIRON FZ 12 KW was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and rapid traverse rates of up to 60 m/min on the Z-axis. The machine is equipped with an automatic tool changer with 24 positions and can support a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine.
Machine Benefits
Technical Advantages
• Controlled axes: 6 axes
• Reach: 704 mm
• Acceleration/deceleration: 0 to 12,000 rpm in 0.6 seconds
• Clamping area: 820 x 440 mm²
• Drilling capacity in St 60: Ø 16 mm
• Tapping: M16
• Milling capacity in St 60: 80 cm³/min
• Acceleration: X & Y axis 0.7 g, Z axis 1.0 g
Additional Information
Movement
Axis range and speed:
J1: 340°/360° (option) at 350°/s
J2: 200° at 350°/s
J3: 388° at 400°/s
J4: 380° at 450°/s
J5: 240° at 450°/s
J6: 720° at 720°/s
Permitted load moment:
Fedpfxsx Nr I Eo Abvopd
J4 & J5: 11.9 Nm
J6: 6.7 Nm
Repeatability: +/- 0.02 mm
Maximum speed
J1: 195°/s
J2: 175°/s
J3: 180°/s
J4 and J5: 400°/s
J6: 600°/s
Permitted load moment
J4 and J5: 7.7 Nm
J6: 9.8 Nm
Tools
Automatic tool changer:
Tool pockets: 24
Tool change time: approx. 0.9 s
Chip-to-chip time: approx. 2.4 s
Workpieces are fed automatically and sequentially loaded into the Chiron machining centers by two Fanuc industrial robots. After the machining process, the parts are removed. The robots then transfer the components to a transfer system, which conveys them to a downstream cleaning unit. The integrated washing line ensures reliable cleaning of the components in accordance with defined cleanliness specifications. After washing, two synchronized Fanuc robots take over the cleaned parts at the rear of the system. Depending on process requirements, the parts are either automatically palletized or further processed in a subsequent step, such as riveting. The entire system operates fully automatically.
Mali oglas
Nemčija
653 km
CHIRON FZ 15 KWM HS
CHIRONFZ 15 KWM HS
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 29.801 h, potovalna razdalja osi X: 729 mm, pomik osi Y: 401 mm, pomik po osi Z: 361 mm, proizvajalec krmilnikov: FANUC, model krmilnika: Series 31i, največja hitrost vretena: 12.000 obr/min, število osi: 4, To 4-osno vertikalno obdelovalno središče CHIRON FZ 15 KWM HS je bilo izdelano leta 2012. Če iščete visokokakovostne možnosti rezkanja, razmislite o nakupu stroja CHIRON FZ 15 KWM HS, ki je na voljo v naši ponudbi za prodajo. Za več informacij nas kontaktirajte.
Prednosti stroja
Tehnične prednosti stroja
• Razpoložljivost: na voljo od 1. 7. 2025
• Obratovalna napetost: 400 V
• Krmilna napetost: 230/23 V
• Material, obdelovan na stroju: aluminij
Fjdpfxex D Nmlj Abvjpd
• Tip konusa: HSK-63
Dodatne informacije
Stroj je še vedno priključen na elektriko.
Mali oglas
Nemčija
653 km
CHIRON DZ15KWM HS
CHIRONDZ15KWM HS
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 21.578 h, število osi: 4, Ta 4-osni stroj CHIRON DZ15KWM HS je bil izdelan leta 2011. Idealen za vertikalno precizno obdelavo, ta model ponuja robustno konstrukcijo in zanesljivo delovanje. Če iščete visokokakovostne rezkalne funkcije, razmislite o stroju CHIRON DZ15KWM HS, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte.
Dodatne informacije
Fpjdex D Nmrspfx Abvsd
Stroj je še vedno priključen na elektriko.
Mali oglas
Italija
653 km
CHIRON FZ08W
CHIRONFZ08W
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 300 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 21i-M series, največja hitrost vretena: 10.000 obr/min, moč vretenovega motorja: 3.700 W, število osi: 3, Ta 3-osni CHIRON FZ08W je bil izdelan leta 2006. Vertikalni CNC obdelovalni center je opremljen z upravljalnikom Fanuc serije 21i-M in omogoča pomike X, Y in Z osi po 300 mm, 250 mm in 250 mm. Ima dimenzijo mize 550 x 300 mm, hitrost vretena 10.000 vrt/min in orodjarno z 12 mesti. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra CHIRON FZ08W. Za dodatne informacije nas kontaktirajte.
• Stanje: Rabljeno
• Stanje: Dobro
• Dimenzija mize: 550 x 300 mm
• Dovoljena obremenitev: 200 kg
• Orodjarnik: 12 pozicij
Dodatna oprema
Fjdpfx Aeygl D Hebvopd
• Odsesavanje ostružkov
Mali oglas
Nemčija
653 km
CHIRON FZ 15 W Magnum HS
CHIRONFZ 15 W Magnum HS
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 24.209 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 400 mm, pomik po osi Z: 360 mm, proizvajalec krmilnikov: FANUC, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 7.500 W, število osi: 4, To 3-osno vertikalno obdelovalno središče CHIRON FZ 15 W Magnum HS je bilo izdelano leta 2014. Idealno za precizne obdelave, zagotavlja robustno konstrukcijo in zanesljivost. Razmislite o nakupu tega CHIRON FZ 15 W Magnum HS vertikalnega obdelovalnega centra. Za več informacij nas kontaktirajte.
Prednosti stroja
Tehnične prednosti stroja
• Število orodij na vreteno: 48
Fpedpfx Ajx D Nl Ujbvsd
• Nosilec orodja: HSK-A 63
• Največji navor glavnega vretena: 95 Nm
Dodatne informacije
Stroj je še vedno priključen na električno omrežje
Mali oglas
Nemčija
653 km
CHIRON FZ 12 W
CHIRONFZ 12 W
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, potovalna razdalja osi X: 550 mm, pomik osi Y: 300 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 810D, največja hitrost vretena: 10.000 obr/min, moč vretenovega motorja: 95.000 W, število osi: 2, Cette CHIRON FZ 12 W a été fabriquée en 1995. Il s'agit d'un centre d'usinage vertical doté d'une broche à cône SK30, d'une vitesse de rotation maximale de 10 000 tr/min et d'un magasin d'outils de 12 emplacements. Elle est équipée d'une commande Sinumerik 810D et de vitesses de déplacement rapide allant jusqu'à 40 m/min. La dimension de la table est de 660 x 350 mm. Envisagez l'achat de ce centre d'usinage vertical CHIRON FZ 12 W. Contactez-nous pour plus d'informations.
Avantages de la machine
Caractéristiques techniques de la machine
Fsdpfjx D Ryaex Abvjpd
• Tension de commande : 230V / 24V
• Alimentation électrique : 3x 400V, 50/60 Hz
• Puissance nominale : 16 kVA
• Intensité nominale : 34A
• Déplacement rapide (XYZ) : jusqu'à 40 m/min
• Dimension de la table : 660 x 350 mm
• Magasin d'outils : 12 positions
• Temps de changement d'outil : env. 2 secondes
Informations supplémentaires
Lors du fraisage avec une fraise de 80 mm de diamètre, un léger bruit a été perçu dans la zone de la broche.
Mali oglas
Nemčija
653 km
CHIRON FZ 18 W
CHIRONFZ 18 W
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik, Ta 4-osni CHIRON FZ 18 W je bila izdelana leta 1993. Opremljena je z dvema četrtima osema in krmilnim sistemom SIEMENS SINUMERIK, ki izboljšuje njeno natančnost in učinkovitost. Dodatni transportni trak za odrezke prispeva k čistejšemu delovnemu okolju. Izkoristite priložnost in kupite to vertikalno obdelovalno središče CHIRON FZ 18 W. Za več informacij o tem stroju nas kontaktirajte.
Prednosti stroja
Tehnične prednosti stroja
Fodpfxsyaaduo Abvepd
• Osi: 4 z 2x 4. osjo
Mali oglas
Italija
653 km
Chiron Mill 2000
CHIRONMILL 2000
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 500 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik, širina mize: 550 mm, dolžina mize: 2.600 mm, največja hitrost vretena: 12.000 obr/min, število osi: 4, To vertikalno obdelovalno središče CHIRON MILL 2000 je bilo izdelano leta 2003. Opremljeno je s krmiljem Siemens Sinumerik. Stroj ima hitrost vretena 12000 min⁻¹.
Dodatna oprema
• Transporter za ostružke
Fjdpfx Absyi Eh Dovjpd
Prednosti stroja
Tehnične prednosti stroja
• Hitri pomik 40 m/min
• Zaloga orodij s kapaciteto za 24 orodij
Mali oglas
Nemčija
653 km
CHIRON DZ 18 W
CHIRONDZ 18 W
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 4, This 3-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to purchase this CHIRON DZ 18 W vertical machining center. Contact us for further information.
Machine Benefits
Technical Machine Advantages
• Traverse speed (x-y-z): 75 m/min
• Spindle distance: 400 mm
Additional Information
NC rotary table, type ATU 200, integrated in IWW/
Rotary feedthrough for IWW/
Axes in the workspace/
Twin-spindle headstock/
HS drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm/
Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg/
Feed drive X-Y-Z 75-75-75 m/min/
Automatic central grease lubrication/
Sinumerik 840D solution line, 10.4" color display/
Controller/
Control interface/
RemoteLine SIE/MTX/
On-screen maintenance management/
for machining inclined surfaces, SIEMENS/
Operating hours and workpiece counter on-screen/
Control cabinet cooler as a door-mounted unit/
3-signal indicator light/
Open-design fluid tower/
Oil-free maintenance unit/
Cooling unit/
A u t t e l l e l e m e n t e/
Chip conveyor, scraper belt 1050 mm, rear/08, left/15, 18, 200 l/
Cooling system KF400-FKA900/900 l, 70 bar/
Bridge for cables and hoses/
Machine preparation for internal flushing/
Fixture flushing in the machining station/
1 rinse gun outside splash guard/
Work area rinsing/
Additional equipment for extraction/extinguishing -/
Additional equipment for pneumatics/hydraulics -/
1860 workpiece carrier control, rough/
Hydraulic connection for 200 bar, single-acting/
Hydraulic connection for 200 bar, double-acting/
Regulated, lubricated purge air connection/
Hydraulic power unit extension/
Additional equipment for measurement/tool breakage detection -/
RLP40Q probe/
Whisker switch for tool breakage detection/
Additional devices for machine operation -/
Automatic loading door opening/closing/
Walk switch/
Additional equipment: NC control -/
M-function package/
Variable clamping logic - Siemens/
Powersave/
Siemens tool management/
Comfort cycle fixture flushing/
Revolutionary feed/
Loader interface with Profinet/
Direct door detection in 'open' position/
Commissioning and training/
Power supply/Compressed air 6 bar/ Ambient temperature 15°-40°C
Fpedpfx Abjx D Nmxevsd
Dražba
Se konča čez
d
h
min
s
Dražba zaključena
Baden-Württemberg
489 km
Petosni obdelovalni center
CHIRONMILL 800
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 498-56, potovalna razdalja osi X: 800 mm, pomik osi Y: 550 mm, pomik po osi Z: 550 mm, model krmilnika: SIEMENS SINUMERIK 840 D, največja hitrost vretena: 12.000 obr/min, Bez minimálnej ceny – garantovaný predaj najvyššej ponuke!
Zadaním ponuky sa zaväzujete k včasnému odberu buď v termíne od 11.05.2026 do 13.05.2026, alebo od 18.05.2026 do 21.05.2026!
TECHNICKÉ ÚDAJE
Pojazd osi X: 800 mm
Pojazd osi Y: 550 mm
Pojazd osi Z: 550 mm
Otáčky vretena: 12 000 ot./min.
Upínač náradia: SK 40
Počet pozícií na náradie: 40
Rozmery stola: 850 mm x 350 mm
DETAILY STROJA
Ovládanie: SIEMENS SINUMERIK 840 D
Dopravník triesok výrobca: KNOLL
Pásová filtračná jednotka výrobca: KNOLL
Systém nulového bodu model: SCHUNK SDE 138
Rozmery a hmotnosť
Rozmery (D x Š x V): 5 500 x 3 700 x 2 900 mm
Hmotnosť stroja: 10 000 kg
VYBAVENIE
Nástrojové držiaky a nástroje vo výmenníku nástrojov
Merací dotykový snímač
Nedávno namontované nové vreteno
Fedeym Anpepfx Abvspd
Poznámka: Na prepravu je potrebný nákladný automobil so šírkou 3 000 mm.
Externý odkaz: Lot 11 / Wittner
Mali oglas
Donzdorf
482 km
Rezkalni center
ChironFZ 12 KW
Pokliči
Stanje: zelo dobro (rabljeno), Siemens 840 D, 48 orodnih mest HSK-A 50, hitrost vretena 15.000 vrt/min, naprava za menjavo obdelovancev, hladilna naprava Knoll z IKZ, Thermodrive, mineralno lito postelje, avtomatska nakladalna vrata, centralno mazanje, dodatna odsesovalna naprava za plastične odrezke.
Fpjdpox D Up Sefx Abved
Mali oglas
Saint-Genix-les-Villages
727 km
CNC obdelovalni center CHIRON FZ 08K S MAG
CHIRONFZ 08K S Magnum High Speed Plus
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 270 mm, pomik po osi Z: 310 mm, hitro pomikanje X-os: 75 m/min, hitri pomik os Y: 75 m/min, hitri pomik na osi Z: 75 m/min, nazivna (navidezna) moč: 17 kVA, skupna višina: 2.300 mm, skupna dolžina: 1.500 mm, skupna širina: 2.600 mm, skupna masa: 3.400 kg, največja hitrost vretena: 30.000 obr/min, nos vretena: HSK40, število mest v zalogovniku orodij: 40, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, CNC obdelovalni center CHIRON FZ 08K S Magnum High Speed Plus (HSP)
TEHNIČNE LASTNOSTI:
Leto izdelave: 2007
CNC krmiljenje: FANUC 18i-MB5
Število osi: 7
Pomik v osi X: 450 [mm]
Pomik v osi Y: 270 [mm]
Pomik v osi Z: 310 [mm]
Hitrost pomika v oseh X, Y in Z: 75.000 [mm/min]
Največji premer palice v vretenu za struženje: 32 [mm]
Obseg vrtenja osi A: 360 [°]
Natančnost pozicioniranja osi A: 0,001 [°]
Obseg nagiba osi B: -20° / +115 [°]
Natančnost pozicioniranja osi B: 0,001 [°]
Tip vretena: HSK40
Največje število vrtljajev vretena: 30.000 [min⁻¹]
Število mest v izmenjevalcu orodij: 40
Potrebna priključna moč: 17 [kVA]
Napajalna napetost: 400 [V]
Dimenzije (DxŠxV): 1500 x 2600 x 2300 [mm]
Teža: 3.400 [kg]
VKLJUČENA OPREMA:
x1 sonda za orodja RENISHAW, tip TS27R
x1 enota za hlajenje vretena
x1 rezervoar za hladilno tekočino
x1 naprava za obdelavo 6. strani
Fpedpfx Aboyq Nyysvjd
x1 vpenjalni primež SCHUNK
x84 vpenjalnih tulec – tip HSK40
x14 vpenjal – tip F35
x1 klimatska naprava za elektro omaro
x1 naprava za izsesavanje oljne megle DONALDSON – tip Torit DCE
x1 pištola za izpiranje
x1 tribarvna signalna svetilka
x1 navodila za uporabo stroja
x1 navodila za upravljavca
x1 programski priročnik
Stroj je mogoče videti pod napetostjo v naših prostorih po predhodnem dogovoru.
Cena na zahtevo, nakladanje na tovornjak vključeno.
Možnost pošiljanja po celem svetu.
Podatki na tej strani so zbrani po naših najboljših močeh, zato ne jamčimo za njihovo popolno točnost.
Stroji podobni Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas in Alzmetall, kot tudi CNC rezkalni, vrtalni, navojni in brusilni stroji.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Root
516 km
Večnamenski univerzalni obdelovalni center
CHIRONFZ 08 MT Magnum
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2014, Deli, prikazani z roko, niso vključeni.
Fpjdpfxjyk E Dbj Abvsd
Tehnični podatki so prikazani na slikah.
Mali oglas
Root
516 km
Vertikalni obdelovalni center
CHIRONFZ 08 MT
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2014, Stroj je v dobrem delujočem stanju. Tehnični podatki so prikazani na slikah.
Fedpfx Aboykufhjvjpd
Mali oglas
Lipie
609 km
Vertikalni obdelovalni center
CHIRONFZ08W ATC 24, Inner Cooling HP, 4 axis
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 300 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, Vertikalni obdelovalni center Chiron FZ08W
Fanuc 21i-M
Maksimalno število obratov 15.000 obr./min,
Hlajenje vretena pod visokim pritiskom
X = 300 mm
Y = 250 mm
Z = 250 mm
Stroj je bil proizveden z 2 x 4. osjo Peiseler RT 100, vendar so 4. osi sedaj odstranjene.
Vpenjalna glava orodja HSK 32
Menjalnik orodja 24 mest
Yrzzng
Stroj je v proizvodnji in ga je možno kadarkoli pregledati.
Stroj je v zelo dobrem tehničnem stanju.
Fodpfxsxd T Rzj Abvspd
Dajem 3 mesečno zagonsko garancijo.
Mali oglas
Verpelét
439 km
Vertikalni obdelovalni center
CHIRONFZ 22 W
Pokliči
Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 12.142 h, Funkcionalnost: omejena funkcionalnost, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Naprodaj je obdelovalni center Chiron FZ22 W z dvema paletama, letnik 1989. Stroj dela natančno. Občas pride do napake pri menjavi orodja – orodje ni pravilno pozicionirano v vretenu. Uporablja se s pritrjevanjem SK40. Krmilnik Sinumerik 810. Priložen je transporter za ostružke in sistem za obdelavo vode Knoll AE 1058.009. Vsa tehnična dokumentacija je priložena. Po dogovoru je možen preizkus pod napetostjo, trenutno ni v proizvodnji. Pri nakladanju ne moremo pomagati.
Fpsdpfxoymbdis Abvod
Olajšamo vam iskanje: "chiron"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Chiron (106)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec

































































































































































































































































































































