Stroji za odstranjevanje robov pločevine Butfering PRIMA W 309 RTT 2005

BÜTFERING PRIMA W 309 RTT

Stanje: rabljeno, Combined profile steel shear and punching machine GEKA Type HYD 80 / Hydracrop 80/A Machine no.: 9566 Year of manufacture: approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching: up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Ihodsrz Tutjpfx Adkew Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Worktable with back gauge at punching unit 550 x 380 mm - Working height at punching unit: 1100 mm - Worktable with back gauge at rectangular notcher 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 pcs. various punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, delovna širina: 1.100 mm, skupna masa: 1.300 kg, širina obdelovanca (maks.): 600 mm, priključek za stisnjen zrak: 6 letvica, najv. debelina pločevine: 40 mm, število prejšnjih lastnikov: 1, vrsta nastavitve višine: električni, dolžina mize: 3.000 mm, višina mize: 850 mm, širina mize: 600 mm, trajanje garancije: 3 meseci, Mode of operation: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design, each with 6 tools, drive power 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Ihsdpfxow U A Dmj Adkew Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with start-up switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to manufacturer’s specifications/standards. Sale includes a mechanical functional warranty of 3 months from delivery.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new condition * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 LLK outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D Isdpfeqfguaex Adkohw * Optional fieldbus interface and IIO3 card available * 2 units available

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for Ijdpfx Adot Hw Iijkshw roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Ihodpfx Adocubatjkew Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Pressing force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70–80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimensions (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel construction Possible operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support 700 mm travel, motorized and 2 support arms with 1500 mm travel, motorized, right/left Operation via control panel with emergency stop as well as electrical foot switch Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump output 19.3 l/min. Control DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Tooling optional * Iedpou Icc Aofx Adkehw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, The press brake was manufactured in 1994. Working length is 1250 mm with a pressing force of 600 kN. Ijdpfx Ajp R Ircsdkehw Manufacturer: Micoda Working length: 1250 mm Pressing force: 600 kN Weight: 4000 kg Power: 10 kW

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Isdpfxed N H A No Adkohw Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, laserska moč: 4.000 W, SHORT-TERM AVAILABILITY: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness, mild steel: 20 mm Max. sheet thickness, stainless steel: 15 mm Max. sheet thickness, aluminium: 10 mm Operating hours: NC The machine has been regularly serviced by TRUMPF! Transmitting tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure regulation - APC capacitive height control and process regulation - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensor technology - Automatic outer sheet edge detection - Programmable power cycles - Microweld - Automatic shut-off - Workspace lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - 3.5" floppy disk drive - TFT colour screen - Electrical equipment: voltage 400 V / 50 Hz - Paint finish: standard RAL 9002/5010 Ihodpfxjuthz To Adksw ADDITIONAL EQUIPMENT: - Laser TLF 4000, including lens monitoring sensor technology - PCS Process Control System

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, valovna dolžina laserja: 1.030 nm, moč: 5 kW (6,80 KM), Manufacturer: Trumpf Model: TruDisk 5001 (6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Output 1: 100% Output 2: 100% Output 4: 100% Beam quality output 1: ≥ 4 mm x mrad, ≥ 100 µm NA01 Beam quality output 2: ≥ 4 mm x mrad, ≥ 100 µm NA01 Beam quality output 4: ≥ 4 mm x mrad, ≥ 100 µm NA01 Active laser power control: yes Live power display: yes Panel PC: yes Processing optics cooling: yes Water connection kit: yes Ethernet in operator area: multiple Number of occupied fiber optic lines (LLK): 4 Number of intelligent optics: 4 Number of occupied couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Output interface 1: Profinet Output interface 2: Profinet Output interface 3: Profinet OPC UA interface: yes VisionLine preparation: yes Number of VisionLine Basic: 2 Iedpfx Ador Izwmokjhw Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA Declaration: Declaration of incorporation with attachment