Debelinski skobeljni stroj, cena po dogovoru

Martin T45

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm Ledpfeqlclbjx Aqcjhl • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Lhjdpfsdqzcxsx Aqcsl Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. Lhodpfx Aeqlck Nsqcsl • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. Ledpfeqlckpox Aqcehl • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Lodpox Sxfvofx Aqcohl - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 506925, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 261 h, moč: 5,5 kW (7,48 KM), širina skobljanja: 630 mm, premer orodja: 125 mm, število rezil: 4, največja hitrost vrtenja: 5.000 obr/min, skupna masa: 1.260 kg, Prodajam rabljeno strojno glodalko MARTIN T45. Prodaja poteka zaradi prestrukturiranja podjetja. Splošne tehnične lastnosti: Širina glodanja: 630 mm Maksimalna globina odvzema pri glodanju: 12 mm Višina glodanja: 2,8 - 300 mm Minimalna dolžina obdelovanca: 270 mm Lhedpfx Aqezwpvascol Teža: približno 1.200 kg Dolžina mize: 1260 mm Število vrtljajev: 5000 U/min Podaljšek mize za glodanje 630 x 450 mm, zložljiv Letnik: 2011 5,5 kW (7,5 KM); maksimalna širina glodanja 630 mm Stroj omogoča vrhunske rezultate pri glodanju. Upravljanje: 1-osna krmilna enota za nastavitev debeline, shranjevanje do 99 vrednosti, gumb za hitro in fino ročno nastavitev debeline, digitalni prikazovalnik, gumb za vklop in izklop rezalne glave, Rezalna glava: TERSA-rezalna glava iz polnega jekla, Z4, D=125 mm; vključno z blokado za enostavno zamenjavo rezil, utora za namestitev rezil za glodanje. Miza za glodanje: Električna nastavitev mize za glodanje s fino nastavitev, hitrost premika 10 mm/s, varno nameščena na 4 podpornih vretenih, površina mize fino obdelana, Podajalnik: 2 hitrosti 6 / 12 m/min, električno nastavljiva tudi med glodanjem, veliki gumijasti valji za podajanje, D=85 mm, za izravnavo različno trdnih vrst lesa, gumijasti valji ščedni do materiala in samozadebni, enostavna zamenjava valjev; stiskani valji na vhodu Sesalni sistem: Visoko dvigljiva, deljena obloga z odtočnim priključkom za odsesavanje ostankov, D=160 mm, Naprava za vzdrževanje: Osrednja mazalna letev za mazalne točke; mazanje ležajev / rezalne glave prek nastavkov. Stroj je še priključen in ga je mogoče preizkusiti. Cena je navedena brez DDV.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodni tok: 20 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina skobljanja: 630 mm, premer orodja: 125 mm, število rezil: 4, vrsta aktuacije: električni, največja hitrost vrtenja: 5.000 obr/min, skupna dolžina površin za skobljanje: 1.260 mm, skupna širina: 1.280 mm, skupna višina: 1.220 mm, skupna masa: 1.200 kg, Oprema: CE označba, dokumentacija / priročnik, • Upravljanje: 1-osno krmiljenje za nastavitev debeline, shranjevanje do 99 vrednosti, od tega 49 uporabnih za prosto programirljivo zaporedje striganja. • Tipkalo za ročno hitro in fino nastavitev debeline striganja glede na digitalni prikaz. Lhodpfxozvfm Es Aqcsl • Tipka za vklop in izklop valja za nože. • Vgrajen števec delovnih ur. • TERSA valj za nože iz polnega jekla s 4 noži. • 2. gumijast valj za vlečenje, 85 mm, kompleten. • Podaljšek mize za nastavljanje debeline, z možnostjo zlaganja, 630 x 450 mm. • Miza za nastavljanje debeline: Električna nastavitev mize za nastavljanje debeline s fino nastavitev, hitrost premikanja 10 mm/s, nameščena na 4 nosilnih vretenih, ki zagotavljajo stabilnost in preprečujejo prevračanje, površina mize fino strgana. • Podajalnik: 2 hitrosti, 6 / 12 m/min, električno nastavljivo tudi med striganjem, veliki gumijasti podajalni valji, premer 85 mm, za izravnavo različnih debelin lesa, gumijasti valji ščitijo material in so samočistilni, enostavna menjava valjev; členkovni pritisk na valj pri vstopu. • Odsesavanje: Višje nastavljiva, deljena zaščita z odsesalnim priključkom, premer 160 mm, možnost priključitve na levo ali desno stran (v posebnih primerih na obe strani), minimalni pretok zraka za odsesavanje: 27 m³/min pri 20 m/s. • Naprava za vzdrževanje: osrednja letev za mazanje, mazanje ležajev / valja za nože prek mazalnih vtičnic. • Teža: pribl. 1.200 – 1.400 kg • Dolžina obdelovanca min. 270 mm.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022,

Stanje: rabljeno, številka stroja/vozila: 007986, Maksimalna širina plošče: 1000 mm Maksimalna dolžina plošče: 2000 mm Lhodpsx A Tggsfx Aqcjl Dolžina transportnega sistema: 3500 mm Povratni transport za kante: desna stran

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Ljdpfxodmi Nio Aqcohl Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg