Široki skobeljnik

Martin T45 - sofort verfügbar -

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s Ljdpfxoqlclbj Akcjah • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Laodpfx Aow Naanekcjh Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm Laodpfxsqlck Ns Akcjh • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), največja višina reza: 200 mm, največja širina rezanja: 1.300 mm, premer žaginega lista: 550 mm, dolžina rezanja (maks.): 3.200 mm, širina reza pri vzporednem vodilu: 1.300 mm, dolžina pomične mize: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting capability + / - 45° Ljdeuh R R Ejpfx Akceah - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm travel - Mitre cross-cut fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Workpiece holder - On/off switch on the double roller carriage - Front support roller

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade Ljdji Dfidepfx Akcsah The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, številka stroja/vozila: AH00004861, Funkcionalnost: popolnoma funkcionalen, obratovalni tlak: 6 letvica, temperatura: 15 °C, NEW OPTIONED EDGE BANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Brand: SCM Model: K360 T-ER1 Year: 2023-2024 CE Ref: AH00004861 WORKING CAPACITIES: - Panel height to be processed: 8 - 50 mm Thickness 10 to 45 mm when using the corner rounding unit - Panel length to be edged: 210 to 2500 mm - Minimum panel width to be processed: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding Max 3 mm when using the corner rounding unit - Edge thickness (strip): max 6 mm without corner rounding Max 3 mm when using the corner rounding unit - Edge width: panel thickness +2 mm on each side - Feed (advance speed): 11 m/min - Workpiece interval: 600 mm - Overhang of workpiece relative to transfer chain (panel overhang): 30 mm MACHINE CONFIGURATION: - Unwinding table (edge reel holder) - Prepared for optional air cushion table - Frontal extension worktable - Feed track: chain - Anti-adhesion spray unit - Edge trimming units (2 spindle moulders) t/min Diamond tools - Glue spreading unit with interchangeable glue pot Pneumatic pre-shearing guillotine Pressing (marouflage) with 3 rollers, one powered - End cutting unit with circular saw blade - Top/bottom flush trimming unit with nesting copy function - Corner rounding unit - Radius scrapers - Straight scrapers - Edge finishing misting device (nebulizer) - Buffing station with textile polishing brush - Main power supply: 400V. Three-phase+N+E 50Hz Lajdpsttakhofx Akcjh Options installed on the machine: - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion table at machine infeed - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick unit - 62.12.61 Misting device for edge finishing - 62.14.55 Diamond tools H=64 on trimming group – 2 cuts - 62.15.06 "SGP-E" glue pot – replaces standard glue pot - 62.15.04 "RC-N" glue scraper unit - 62.12.12 "SP-V" brush unit Machine available: in stock

Stanje: rabljeno, Formatna žaga SCM 320cm SiX Voziček 320cm, Agregat nagibljiv v obe smeri od +45 do -45 stopinj, Nagib in dvig/spust žaginega lista motorno nastavljiva, Ograja na desni strani motorno nastavljiva do 1500mm, Dvoosni predrezkar električno nastavljiv, Lasdpfx Akszd Uf Tocjh Motor 7,5KW, hitrosti na frekvenčnem pretvorniku Maks. premer lista 550mm, Voziček lomljiv pod kotom Rabljena stroj, v dobrem stanju Stroj ima novo neoriginalno krmiljenje Vse nastavitve delujejo.

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Lsdpopgkmwefx Akcjah Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Stroj za obrobno lepljenje HOLZ-HER SPRINT 1329 Multi z motorično pritiskalno ploščo PUR in EVA lepilo (do 60 mm) z NOVIM GLU JET GJ725 PUR PRO, vključno z vakuumsko črpalko motorična vodilna letva za vnos vodilo za ozke dele rezanje za izravnavo spojev IntelliSet – korekcija orodja fa.s.t. – nastavitev med premori + prikaz ostankov dolžine robnega traku iTronic – nadzor pritiska in količine lepila avtomatsko mazanje verige drugi izmet obdelovanca + zračni blazinni sistem na območju vhoda popolna motorizirana oprema vseh agregatov multifunkcijsko rezanje – radij 1,3 mm (2-krat) in 2 mm (2-krat) + paket za gnezdenje, vertikalno od spodaj razpršilna naprava + agregat za nanašanje premazov z teksturno obdelavo za običajno uporabo in strukturirane površine itd. Stroj je trenutno v obdelavi v tovarni v Voitsbergu / Avstriji. Predvideno dokončanje: približno oktober/november 2026. Dostava, montaža in usposabljanje za upravljanje stroja je možno urediti neposredno pri nas, po dogovoru. Laodpfx Aozx Ennokcjh Stroj je trenutno v našem skladišču v Gratweinu / Avstriji. V primeru razlik med nemško različico in različico v drugem jeziku je merodajna izključno nemška različica. Naše splošne pogoje najdete na naši spletni strani na holzher.de/de/agb.

Stanje: zelo dobro (rabljeno), ENOSTAVNA STROJ ZA OROBOVANJE ROBOV (LEVA STRAN) Debelina robov v zvitkih (min/maks) mm 0,3 / 3 Debelina robov v letvah/trakovih (min/maks) mm 0,4 / 20 Debelina plošč (min/maks) mm 8 / 60 Nadzor POWER CONTROL PC23 Powertouch / WoodCommander (pripravljen za TAPIO) Hitrost podajanja m/min 16-25 Tlak na valj, pogon s klinastim jermenom Naprava za nanašanje ločilnega sredstva, zgoraj/spodaj Nastavljivo vodilo, nadzorovano s sistemom C.N. Naprava za obdelavo robov 2 x Kw 3 Naprava za ogrevanje robov Naprava za nanašanje lepila (vroče taljeno lepilo + predgrevalnik) FE-MA-TECH + QA/PU + PU65 Območje pritiska na rob (nadzorovano s sistemom CN) "C 7" Magazin za robove (oddelek št. 2) s servo-sistemom za podajanje robov Odrezna naprava PK 25 (2 x Kw 0,8) maks 25 m/min Predobdelovalna naprava BF20 (2 x Kw 1,5) Večprofilna obdelovalna naprava MF21 (2 x Kw 0,55) 0°-20° Večfunkcijska naprava (obdelava zaobljene robove in oblikovalna naprava) FK 30/V20 (1 x Kw 0,7) nadzorovano s sistemom CN Univerzalna obdelovalna naprava za utore/fuge in profiliranje SF 21 (1 x Kw 5) 0°-90° Večprofilna naprava za obdelavo robov MN 21 (nadzorovano s sistemom CN) Laodpfxszku Rpo Akceh Ploski noži FA20 Naprava za poliranje FA06 (2 x kW 0,18) + prosti prostor