Industrijski sesalnik nakup rabljenega (8)

Stanje: pripravljen za uporabo (rabljen), Moč motorja: 3 x 1000 W. Dobro ohranjen industrijski suhi sesalnik s 3 motorji, skupaj 3 kW, obnovljena cev, talna sesalna šoba s cevjo, 3 sesalne nastavke. Primeren za ločevanje prahu z MAK-vrednostmi ter karcinogenih snovi skupin II + III. Filter razreda prahu E + N, ročno čiščenje z ročico za stresanje, posoda za prah cca 35 l spodaj, praznjenje s stopalko. Naprava za povečano obremenitev pri komercialni uporabi. Rodpsyl Nn Tsfx Ag Tsp

Stanje: novo, Leto izdelave: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPF) and catalytic converters, constructed entirely of AISI 304 stainless steel and acid-resistant AISI 316 steel. It is equipped with an integrated measurement system and a drying unit operating at temperatures up to 130°C, utilizing a side channel turbine. An integrated thermal printer enables the documentation of filter contamination measurements before and after regeneration. This device is an excellent addition to DPF cleaning machines that do not have a built-in drying system. ADVANTAGES OF USING THE DPF HEATER PRO: - Can be used independently of the regeneration device - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results documented by printout - Fast filter system with Camlock closure - Adapters for passenger cars and commercial vehicles - Fully automatic drying process TECHNICAL DATA: - Weight: 100 kg Rsdpfsglpywox Ag Tsp - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Max. power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Air flow: up to 390 m³/h - Overpressure: up to 370 mbar - Negative pressure: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable in the range of 70°C - 130°C - Safety devices: pressure sensor, emergency stop switch - Declaration of conformity: CE

Stanje: novo, Leto izdelave: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for the regeneration of DPF/FAP/GPF filters and catalytic converters, designed for passenger cars and light commercial vehicles. It features a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The interior of the machine is made of stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed circuit using a hydrodynamic method. The device allows measurement of filter contamination both before and after regeneration, with results given in mbar. It is equipped with an integrated drying system with temperatures up to 100°C. After regeneration, a final backpressure measurement is performed, provided to the customer as a printout. This comprehensive cleaning process can restore the filter to up to 99.9% of its factory parameters. Components from leading European manufacturers are used in the construction of the machine, ensuring top quality and reliability. EQUIPMENT: • 7-inch color touchscreen • Sensors: fluid level, fluid and air temperature, flow pressure, door opening • Safety features: emergency stop switch, chamber door limit switch, phase failure and phase sequence monitoring • Filter contamination measurement system • Chamber made of AISI 316 stainless steel • Advanced 4-stage fluid filtration system • Integrated drying system with stepless regulation in a temperature range from 70 to 100°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Connection adapter set for DPF / FAP / GPF / CAT / SCR filters • Starter kit of consumables (one filter set + 2L XTON DPF cleaning agent) • Fluid tank with capacity up to 185 L Rsdpfx Agegllwis Tsp • extended manufacturer's warranty of 12 months (optionally 24 or 36 months) ADDITIONAL OPTIONS: • automatic filter cleaning on both sides • separate fluid circuit with additional pump • fluid tank thermal insulation • automatic fluid refilling • automatic dosing of cleaning agent • Quick-X filter mounting system • EURO5 and EURO6 adapters

Stanje: novo, Leto izdelave: 2025, DPF MASTER FLASH STANDARD™ is a compact device for the regeneration of diesel particulate filters (DPF) using the hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and an integrated filtration system. The cleaning process is fully automated and restores up to 99% of the filter’s original factory specifications. The system is supplied with adapters compatible with all passenger car DPF filters. To further optimize the regeneration process, we recommend purchasing the specially developed DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: Redpfxegllxgs Ag Tsp - Weight: 200 kg - Chamber external dimensions (cm): 150 x 80 x 131 - Liquid tank: 150 liters - Working pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Adjustable liquid temperature: 30°C to 100°C - Pump capacity: up to 133 L/min - Liquid filtration: 5 – 100 microns - Safety features: temperature sensor, liquid level sensor, emergency stop switch - Declaration of conformity: CE EQUIPMENT: - Liquid level sensor - Temperature sensor - Programmable temperature controller - Programmable controller for automatic operating cycle - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0–8 bar) - Integrated filtration system - Adapters for DPF filters With the purchase of our machine, you receive a starter kit to help you get up and running immediately. The kit includes: - Set of 3 filter cartridges + 3 spare filters - XPOWER DPF Cleaner chemical package (2 x 1 L)

Stanje: novo, Leto izdelave: 2025, skupna širina: 2.100 mm, skupna dolžina: 1.260 mm, skupna višina: 2.150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all vehicle types. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity of up to 250 l/min, and an integrated filter system for drying. The Master Flash technology fully exploits the advantages of the hydrodynamic process and restores filter efficiency to up to 99.9% compared to a new filter. It is completely safe for the monolithic structure of DPF filters. Properly set parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, thus preserving the original factory filter characteristics. The pump features a chemical seal, and electronics based on components from leading European manufacturers guarantee top quality and reliability. The machine comes with a system for measuring filter contamination (backpressure measurement) and an integrated drying system capable of reaching temperatures from 70 to 130 degrees Celsius. The advanced filtration system with a pre-cleaning filter significantly extends the service life of the main filters. Master Flash technology, combined with unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical intervention in the filter structure, restoring factory performance up to 99.9%. TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank volume: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Maximum power: 12 kW * Frequency: 50 Hz * Water inlet: 1/2” * Water outlet: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen Rsdsgllkaepfx Ag Tjp • Sensors: liquid level, liquid and air temperature, flow pressure, door opening, phase failure, and phase sequence • Filter contamination monitoring system • Chamber made of AISI 316 stainless steel • Advanced 4-stage liquid filtration • Two heating elements • Integrated drying system with temperatures from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter print-outs • Ethernet controller for remote maintenance • Adapter set for connecting DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapters • Starter kit with consumables (complete filter set + 2L XPOWER DPF Cleaner solution) • Extended 12-month manufacturer's warranty (optionally 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS – CONTACT US FOR FURTHER INFORMATION.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Power 3 kW Weight 50 kg Redevwgt Tepfx Ag Top This cfm industrial vacuum cleaner has only been used for wet vacuuming and is in good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Performance: 4 kW Rjdpfevwgukjx Ag Tep Weight: 150 kg This CFM industrial vacuum cleaner can be used for both wet and dry applications and is in good condition.

Stanje: novo, Leto izdelave: 2025, trajanje garancije: 12 meseci, kapaciteta rezervoarja za vodo: 300 l, vrsta vhodnega toka: trifazni, skupna širina: 2.360 mm, skupna dolžina: 970 mm, skupna višina: 2.030 mm, vhodna frekvenca: 50 Hz, DPF Filter Regeneration Machine – MOTSLER SLR Premium MOTSLER SLR Premium is a top-quality, reliable, economical, and extremely user-friendly machine designed for professional cleaning of DPF/FAP/GPF/SCR/DOC/EURO6 filters and catalytic converters. It is suitable for all filter sizes – from passenger cars, vans, trucks, as well as construction machinery and equipment. The device is constructed entirely of stainless steel and built with high-quality components supplied by Polish and European manufacturers such as Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, and Hager. The SLR Premium machine carries out a comprehensive DPF cleaning process through: initial measurement, cleaning, drying, final measurement, and concludes with a printout of the DPF cleaning report. Technical data: - Device dimensions (L/W/H) [mm]: 2360 x 975 x 2031 - Cleaning chamber dimensions (L/W/H) [mm]: 1600 x 830 x 1090 - Construction: 304 stainless steel - Weight: 550 kg - Power supply: 3 x 400V 50 Hz - Max power: 11 kW - Optimal power: 6.9 kW - Protection: 20 A - Tank capacity: 300 liters - Pump capacity: 250 L/min - Hose diameter: 1.1/2” DN 40 - Water drain: 2” DN 50 - Drying temperature: 100 - 120°C - Water temperature: 10 - 50°C - Max. air flow (drying): 325 m³/h - Air pressure (drying): 300 mbar - Drying and cleaning: bidirectional manual - Contamination measurement: on dry and wet DPF filter - Filtration: 250 - 1 micron - Pre-filtration: 2 pre-filters - Filter replacement frequency: ~ every 40-100 cycles - Noise level: 70 dB - Min. ambient temperature: 3°C - Declaration of conformity: WE, CE Equipment: - Single-line SWS system - Professional PFS filtration system with insert replacement every 40-100 DPFs - 7” touchscreen display - Thermal printer for cleaning reports - Caster wheels - Machine leveling feet - Tempered glass windows - 2 cleaning hoses - 17 DPF filter adapters - 8 rubber seals for adapters - 4 DPF filter locks - 4 adapter clamps - Inspection camera Redpfxetrmrij Ag Tep - Foam neutralizer - 2 pre-filters - Main filtration insert - DPF CleanX filter cleaning fluid Equipment / Adapters: - All adapters for passenger cars and trucks - Set of rubber seals for adapters - DPF filter locks to prevent filter movement WHAT DISTINGUISHES THE SLR PREMIUM MACHINE? Build Quality - Constructed fully from stainless steel using components from leading European manufacturers: Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, and Wieland – manufactured with the utmost precision. Single-line SWS System - All processes are handled via a single line, eliminating the need to stop the machine, open doors, or switch the DPF filter between cleaning, drying, and measurement hoses. PFS Filtration System - Multi-stage filtration system featuring two reusable stainless steel pre-filters and one main filter with a 4.8 m² surface and a capacity of 40–100 DPF filters. Side Ventilation - Enables operation in low-ceiling rooms. Steam does not condense on the machine’s roof, which prevents electronic flooding, electrical short circuits, and machine damage.