Naprava za regeneracijo DPF

XTON DPF Master Flash Professional

Stanje: novo, Leto izdelave: 2025, skupna širina: 2.100 mm, skupna dolžina: 1.260 mm, skupna višina: 2.150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all vehicle types. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity of up to 250 l/min, and an integrated filter system for drying. The Master Flash technology fully exploits the advantages of the hydrodynamic process and restores filter efficiency to up to 99.9% compared to a new filter. It is completely safe for the monolithic structure of DPF filters. Properly set parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, thus preserving the original factory filter characteristics. The pump features a chemical seal, and electronics based on components from leading European manufacturers guarantee top quality and reliability. The machine comes with a system for measuring filter contamination (backpressure measurement) and an integrated drying system capable of reaching temperatures from 70 to 130 degrees Celsius. The advanced filtration system with a pre-cleaning filter significantly extends the service life of the main filters. Master Flash technology, combined with unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical intervention in the filter structure, restoring factory performance up to 99.9%. Godpfxjgllkas Ab Eotw TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank volume: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Maximum power: 12 kW * Frequency: 50 Hz * Water inlet: 1/2” * Water outlet: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: liquid level, liquid and air temperature, flow pressure, door opening, phase failure, and phase sequence • Filter contamination monitoring system • Chamber made of AISI 316 stainless steel • Advanced 4-stage liquid filtration • Two heating elements • Integrated drying system with temperatures from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter print-outs • Ethernet controller for remote maintenance • Adapter set for connecting DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapters • Starter kit with consumables (complete filter set + 2L XPOWER DPF Cleaner solution) • Extended 12-month manufacturer's warranty (optionally 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS – CONTACT US FOR FURTHER INFORMATION.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0. Year of manufacture: 2019 Configuration: - 1 pc. milling spindle 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return conveyor returns the workpieces either back to the operator or to the rear of the machine for throughfeed operation. Maximum workpiece size: x 1250 x 50 mm Minimum workpiece size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Comes with full documentation and CE certification. Very good condition. Available immediately. Gsdpsvx Dz Dsfx Ab Ejtw

Stanje: rabljeno, Leto izdelave: 2005, 2005 BIESSE ROVER B 4.40 FT CNC obdelovalni center s 3 osmi Tehnične značilnosti na zadnji fotografiji Gedpfxswmdyns Ab Estw Delovne ure stroja: 45.343 Ure v avtomatskem načinu (delo): 27.267

Stanje: novo, PAK-1 Unwucht-Messeinheit wurde entwickelt, um Ihre Auswuchtmaschine zu modernisieren. Eine Auswuchtmaschine hat eine lange mechanische Lebensdauer, doch durch den langjährigen Einsatz kommt es nach und nach zu Ausfällen der Elektronik und der Messtechnik, was zu Problemen bei Ersatzteilen und fehlender technischer Unterstützung führt. Minimieren Sie Ausfallzeiten und sichern Sie die Zuverlässigkeit Ihrer Auswuchtmaschine durch ein Upgrade mit einer neuen, fortschrittlichen Messeinheit. Die Unwucht-Messeinheit PAK-1 arbeitet in allen Auswuchtmaschinen der meisten Bauarten und Hersteller. Vertrauen in die Messergebnisse und einfache Bedienung: Unsere Geräte sind leicht einzurichten und zu bedienen, es sind keine speziellen theoretischen Kenntnisse erforderlich. Breites Funktionsspektrum für Ihre Auswuchtmaschine: Der Einsatz moderner Mikroprozessor-Technologie und die langjährige Erfahrung unserer Entwickler ermöglichen uns die Umsetzung von Funktionen, die bisherigen Herstellern nicht zur Verfügung standen. Ihre Maschine entspricht ISO 21940: Mit der PAK-1 Unwucht-Messeinheit ausgestattete Auswuchtmaschinen erfüllen vollständig die Genauigkeitsanforderungen der aktuellen Normen. HIGHLIGHTS • Wir machen das Auswuchten einfacher – der Hauptvorteil unserer Systeme. • Der Auswuchtprozess wird in Echtzeit dargestellt und das Unwuchtverhalten des Rotors am Bildschirm überwacht, um das bestmögliche Ergebnis zu erzielen. • Maximale Empfindlichkeit der Maschine zu jedem Zeitpunkt des Betriebs, Einrichten und Kalibrieren übernimmt der Bediener selbst. • Unempfindlich gegenüber externen Erschütterungen, mit hohem Schutzgrad gegen verschiedene Störeinflüsse. • Schnelles Erlernen und einfache Wartung für jeden Mitarbeiter. Gtodpfx Ajq Ttn Dob Esw IM LIEFERUMFANG: 1) Signalverarbeitungseinheit für Vibrationssensoren, 2) lüfterloser Industrie-PC mit Touchscreen, 3) neue Vibrations- und Drehzahlsensoren, 4) geschützter Kabelsatz. ABLAUF DER MODERNISIERUNG DER MESSEINHEIT: - Austausch des vorhandenen Messsystems durch das Auswucht-Komplex PAK-1 auf Basis eines Industriecomputers - Installation neuer Vibrations- und Drehzahlsensoren - Austausch sämtlicher Anschlusskabel - Einstellung der Messeinheit an der Auswuchtmaschine - Schulung des Personals zur Bedienung der Anlage Die VTM GROUP bietet die Modernisierung Ihrer Auswuchtmaschine an. Wir reparieren und modernisieren verschiedene ältere Auswuchtmaschinen aller Hersteller und Bauarten. Kosteneffizient. In 95 % der Fälle ist es eine wirtschaftliche Alternative zum Neukauf einer Auswuchtmaschine. Schnell. Die Arbeiten können beim Kunden innerhalb von 1-2 Tagen durchgeführt werden. Neue Komponenten für die Modernisierung Ihrer Maschine: • Einbau neuer Messeinheit sowie Vibrations- und Drehzahlsensoren • Einbau neuer elektrischer Ausrüstung • Herstellung oder Instandsetzung des Antriebsstrangs • Fertigung neuer Laufrollen Jedes Unternehmen ist einzigartig – sprechen wir über Ihre Anforderungen. Wir finden eine Lösung für jede Auswuchtmaschine! Kontaktieren Sie uns für Ihr individuelles Angebot! 👇

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 Gedpjqnt N Dsfx Ab Eetw -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding power source: TIG WSM400R -Cooler

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit Gjdjxraimepfx Ab Eotw

Stanje: novo, Leto izdelave: 2025, Kot upogiba (maks.): 150 °, najv. debelina jeklene pločevine: 1 mm, najv. debelina bakrene pločevine: 1 mm, ❗❗ Electric Folding Machine RED-3200/1.0/150* with Cutout ❗❗ Discover a new era in metalworking with our revolutionary sheet metal folding machine that seamlessly combines traditional craftsmanship with the latest technological advancements. We present a machine that not only meets but exceeds your boldest expectations. Don’t miss the chance to equip your workshop with a groundbreaking tool that eliminates the classic challenges of manual bending, offering unparalleled comfort and efficiency. Bending Machine / Folding Machine / Roofer’s Bender Polish Manufacturer PROD-MASZ / Brand new directly from the manufacturer With our folding machine, equipped with an advanced electronic control system, precision and ease of operation become standard. Now, a simple button press initiates the bending process, guaranteeing flawless results without unnecessary physical effort. Magnets mounted on the bending beam ensure the stable positioning of the sheet and enable precise dimension adjustments—the key to perfect forms. The RED 3200/1.0 mm/150* features an impressive maximum working width of 3,200 mm and can bend steel sheets up to 1.0 mm thick, with a 30% higher capacity for non-ferrous metals. The maximum bending angle of 150 degrees and the ability to cut sheets along the entire working width push the limits of precision and efficiency. Additionally, the machine offers a three-stage adjustment of the upper beam height and a range of essential accessories, including an angle protractor, angle limiter, and a rear support table for sheets -> rapid adjustment with a handwheel. Additional equipment (optional): Gtodpfocv R Dkjx Ab Ejw - Stop with scale – quick adjustment via hand crank, +1,250 EUR - Rotary shear (max cutting capacity 0.8 mm / steel), +350 EUR - Manual seam closer, +75 EUR Delivery costs: 360 EUR across Germany Delivery schedule: Every Monday/Tuesday Cash on delivery or prepayment We look forward to your inquiry! -> Invoices are provided

Leto izdelave: 2014, stanje: novo, Approx. 30 meters of tyre racking in stock Heights available from 2m, 3.35m, 4m in stock. Brand new racking system from a major German manufacturer. Load capacity plates, documentation etc. included as standard. Frames blue RAL 5010, bracing and base plates galvanized. Frames pre-assembled, available from 2 m to 7 m height. Beams orange, RAL 2004. Beam lengths: 3.6 m, shelf load 1,000 kg. 3 levels per bay. Negotiable price: €2,070.00 net ex stock. Offer includes: 9 pcs pre-assembled frames, depth 50 cm, height 3.36 m 48 pcs beams, length 3.6 m, 1,000 kg max. load per level 96 pcs safety locking pins 18 pcs concrete anchors Goods are in stock. Transport and assembly available on request. Other configurations available on request. Beam lengths of 1.80, 2.70, and 3.60 m available. Always over 3,000 linear meters of pallet racking from various manufacturers in stock. Modifications and errors in the technical data, specifications, and prices as well as interim sale reserved! Please refer to our terms and conditions. All prices excl. VAT, ex stock. Purchase / Sales – We are continuously looking for and offering various items from different sectors. • Clean-swept site clearances Gjdpfxjb H Scyo Ab Eotw • Company liquidations • Fast, flexible, effective! We also clear sites for insolvency administrators. Send us a brief enquiry, we will contact you immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Hydraulic synchronized press brake MECOS Mod. Syncro 200/4000. CNC Control ESA KVARA. No. 07 controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) Automatic WILA crowning system. Pneumatic tool clamping: Promecam type, Tecnostamp H=150 mm. Useful bending length: 4050 mm. Pressing force: 200 tons. Front safety devices: DSP LASER. Weight: 24,000 kg. Gjdpfxjv S Ad Ro Ab Eotw

Stanje: dober (rabljeno), The counterpressure technology of the MULTIMA product line is particularly suited for filling CO2-containing beverages such as beer, soft drinks, or mineral water. The integrated vacuum technology enables low-oxygen bottling and canning. Gtsdohx D U Topfx Ab Eow Nominal capacity: up to 700 units/hour Manual filling Stainless steel rotary lobe pump