Susemihl Gmbh Maschinenfabrik nakup rabljenega (68.388)

Leto izdelave: 1983, stanje: rabljeno, Yeast propagation system featuring a steamable wort sterilisation tank rated for 2 bar operating pressure with a capacity of 2.47 hl, a second heatable and coolable wort sterilisation tank rated for 2 bar operating pressure with a 12.7 hl capacity, as well as a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar, and jacket cooling in the lower third (without cone). All tanks are equipped with agitators. The package also includes a CIP tank. The system is controlled via a Steinecker control cabinet (time-controlled). Tanks are also available individually. Additional machine details: with control cabinet and CIP tank Fjdpfx Abevcqt Ujvspd Equipment: 2 wort sterilisation tanks each with agitator (approx. 2.4 hl and approx. 12.7 hl), control cabinet, CIP system, conical pressure tank with agitator.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Fsdpfsx A U Ncsx Abvepd Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: delavnici obnovljeno (rabljeno), Horizontal baler DIXI 60 SLD Year of manufacture: 2014–2016 Semi-automatic 60-ton press system for efficient volume reduction of residual materials (recyclables) in industrial and commercial sectors: - Cardboard - Tetra Pak/cartons - Films - PET bottles - Foam materials - Insulation panels - and other compressible materials. Machine dimensions (L x H x W) approx. mm: 4150 (5080) x 1725 x 2035 Feed opening (W x H, standard) mm: 990 x 1110 Machine weight approx. kg: 5,420 Pressing force max. kN: 60 t / 600 kN Press cycle (average) approx. s: 47 Bale size (W x H x L) approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370–410 Tying: manual Number of ties: 3, secured with wire and quick-release loops Drive power: 7.5 kW; 400V/32A The presses have been tested and are fully functional, supplied with fresh UVV inspection and DGUV Regulation 3 test certificate. The Dixi 60 SLD is immediately ready for use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: - Replacement of all hydraulic hoses Fpsdpfx Aonfux Usbvsd - Hydraulic oil change - Inspection of the hydraulic unit - Inspection and, if necessary, replacement of hydraulic cylinders Net price plus VAT and possible transport.

Stanje: delavnici obnovljeno (rabljeno), moč: 11 kW (14,96 KM), obratovalna teža: 8.000 kg, Horizontal baling press DIXI 80 SLD Year of manufacture: 2018-2021 Semi-automatic 80-ton press system for economical volume reduction of residual materials (recyclables) in industrial and commercial applications: - Cardboard - Tetra Pak packaging - Foils - PET bottles - Foam material - Insulation panels - And other compressible materials Machine dimensions (L x H x W) approx. mm: 4,320 x 1,830 x 2,154 Feed opening (W x H, standard) mm: 1,040 x 1,110 Machine weight approx. kg: 8,000 Max. pressing force: 80 t / 800 kN Cycle time (average) approx. s: 35 Bale size (W x H x L) approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Tying: manual Fpodpfx Abeqa Dq Devsd Number of ties: 4, using wire with Quicklink wire system Drive power: 11 kW; 400V/32A The presses are tested and fully operational, supplied with a current UVV inspection and certified according to DGUV Regulation 3. The Dixi 80 SLD is immediately ready for operation. Upon request and for an additional charge, the Dixi 80 SLD can be completely overhauled. This includes: - Replacing all hydraulic hoses - Changing hydraulic oil - Inspecting the hydraulic unit - Checking and, if necessary, replacing the hydraulic cylinders Net price plus VAT; transport available on request. Operating manual is available and supplied as both PDF and printed copy.

Stanje: rabljeno, Quantity-dependent dual system Fpjdpfevcqzrjx Abved Machine (additional): Separator, condenser, and control cabinet from 2010 Equipment: 1 NH3 separator, 2 refrigeration compressors, 1 evaporative condenser, 1 control cabinet

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: Fodpfxju Idl Ss Abvjpd x-axis travel: 690 mm y-axis travel: 400 mm z-axis travel: 550 mm B-axis (table): 360° Control: Siemens 840 D Spindle speed: max. 15,000 rpm Tool clamping system: DIN 69893 standard Tool holder: HSK-A63 Tool magazine: chain magazine, 12 positions Traverse speed (x/y/z axis): 40 m/min Total power requirement: 195 kW Machine weight approx.: 13.0 t Travelling Column Machining Centre - The machining unit consists of 3 NC machining axes and 1 NC rotary table axis - Equipped with rotary indexing table, type SKH-NC 4/029; Ø=460 mm; table plate clamped Ø500x20 mm; max. table rotation speed 22 rpm, 4x 90° indexing - Operating panel: SIEMENS - Spindle type: DRF-WE-255-N-W-15-30, 15,000 rpm, spindle power = 30 kW - Chip conveyor: Knoll type 400K-3/280; discharge height 1,150 mm - Spindle cooling unit: SCHIMBKE type DK 80 V; 3.36 kW (internal coolant supply)

Stanje: rabljeno, Rotacijski dozirnik, rotacijski ventil, Ventilatorenfabrik Oelde GmbH, rabljeni stroj Proizvajalec: Ventilatorenfabrik Oelde GmbH Tip: MS 050-390 A Fedpfxeytr H Uj Abvopd Kapaciteta / Hitrost: 58 litrov; rotor opremljen z 12 fiksnimi lopaticami (celicami) – 15 vrt/min Električni podatki: 400 V; 50 Hz; 4,5 kW

Stanje: rabljeno, Odstranjevalec oljne megle, separator emulzijske megle, rabljeni stroj Proizvajalec: IFS Industriefilter Service GmbH Tip: IFM 2000 Skupne mere: Širina: 1170 mm Globina: 700 mm Fodpfxsyn Rmie Abvopd Višina: 1100 mm Teža: 136,5 kg Leto izdelave: 1995 Električni podatki: 400V, 1,5 kW, 3,2 A Velikost filtra: 605 x 615 mm

Leto izdelave: 2015, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, skupna dolžina: 13.000 mm, skupna širina: 4.520 mm, skupna višina: 2.550 mm, številka stroja/vozila: 201507-025, REZALNIK Z VODNIM CUREKOM IN LEPILNA POSTAJA: Naprava je del večje proizvodne linije, poglejte tudi naše druge oglase. Na ponujeni napravi so se EPS-/XPS-surove plošče (ročna polnitev v zalogovniku) na čelni strani zlepile v neprekinjen trak, nato pa je sledila formatizacija z rezalnikom na vodni curek, vključno z izrezi in rezkanjem utorov. DIMENZIJE SUROVINE: Dolžina: 1500mm - 2500mm Fsdpfsytp U Ajx Abvspd Širina: 600mm - 1250mm Višina: 20mm - 50mm REZALNIK Z VODNIM CUREKOM: cut Expert variojet (proizvajalec expert international GmbH, prej expert systemtechnik GmbH) VKLJUČUJE: Lepilni agregat (Nordson), rezkalno vreteno (Jäger)

Leto izdelave: 2017, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AU170124-01, PREVIOUS APPLICATION: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm Fsdpfx Abjytphisvspd EQUIPMENT: Travelling gantry with synchronized drive Vacuum lifting beam with automatically controlled suction rows, switching on/off depending on the component length Vacuum generator Schmalz with area gripper Clamping cartridges adjacent to the suction cups ensure vacuum activation Z-axis lifting movement of the suction frame via scissor guides Z-axis with asynchronous motor, MoviDrive frequency inverter, belt drive Interfaces to upstream and downstream stations Siemens S7-300 control system CONTROL CABINET: Power supply, power and control section with main switch, power supply unit, motor protection switches, circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of one CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet connection, required digital input and output cards, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WT 1104, skupna višina: 3.421 mm, skupna širina: 4.704 mm, skupna dolžina: 9.550 mm, nosilnost: 200 kg, gradbena višina: 3.421 mm, Vacuum Turning Gantry for Panels The turning unit offers two different "automatic" operating modes: I. Transfer without rotation The panel is shifted sideways, aligned to the reference edge (zero line) of the machining center, and indexed further to the machining center (BAZ). II. Transfer with rotation The panel is shifted sideways and rotated along its longitudinal axis before being indexed to the machining center (BAZ). Each function can also be operated manually in "hand" mode. SPECIFICATIONS: Maximum panel size: L x W x H: 8000mm x 2500mm x 100mm Maximum weight: 200kg Minimum panel size: L x W x H: 1500mm x 1500mm x 12mm The turning gantry is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the elements. The elements are always picked up using vacuum and then either transferred horizontally to the zero line of the machining center or additionally rotated by 180° while in transit before being placed at the reference edge. Rotation is monitored via absolute encoders; cross-travel positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm (width), with roller diameter Ø 108 mm, is fitted with material-friendly rubber rings; it is powered by a SEW geared motor. The roller table is controlled via a frequency inverter, speed v=45 m/min, freely adjustable. GENERAL INFORMATION: The entire area is fenced off, with two sliding doors securing the longitudinal side of the system. The doors are monitored for safety. The operator panel with a 12" touchscreen is installed in the fenced area. The installed PLC S7-1500 is programmed with three operational levels: • Automatic mode • Manual mode • Maintenance mode Input signals, feed side: - Start roller table - Turn yes/no - Emergency stop (entire system) Input signals, discharge side: Fedpfxsyta R Ue Abvspd - Start roller table - Emergency stop (entire system) Output signals, system: - Emergency stop (entire system) - Part received

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No. 166 0821 Year of manufacture: 2008 Used, operational Travels: X-axis 600 mm Y-axis (change position) 600 (975) mm Z-axis 500 mm Control system: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measurement system: Absolute path measuring system X, Y, Z Spindles: Spindle speed (stepless) 20–10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK–A 100, horizontal arrangement side by side Spindle distance 600 mm Spindle bearing diameter 100 mm Motor spindles liquid-cooled, AC technology Workspace: Swivel carrier with ground teeth, max. load capacity 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tools HSK-A 100 chain magazine, place-coded Automatic pickup Tool change time (chip-to-chip) 4.9 sec. Max. tool diameter 100 mm 250 mm with free adjacent slot Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimal quantity oil lubrication (spindle) Chip conveyor Connection for central coolant system Hydraulic unit Maintenance unit Water recooler Full enclosure, suitable for crane loading Dimensions, with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Dimensions, without paper band filter: approx. 5.15 x 6.60 x 4.20 m Fjdpfjyrddvox Abvopd Remarks: - Good condition according to age - Annual maintenance was regularly carried out by the previous owner --- Sale does not include clamping devices --- --- No foundation parts included --- Immediately available, delivery date by arrangement EXW 72793 Pfullingen, Main components dismantled Transport to installation site to be arranged by customer/buyer! Dimensions/transport dimensions of the main machine parts: 1 pc Machine unit (X, Y, Z) mm 3,800 x 3,350 x 3,400 approx. 13,000 kg 1 pc Table unit mm 4,400 x 2,400 x 3,400 approx. 10,000 kg Plus peripheral units such as chip conveyor, small parts, sheet metal, etc. Available at short notice!!!!! Delivery date by arrangement

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: X-axis travel: 800 mm y-axis travel: 685 mm Fjdpfx Asytcf Uebvepd z-axis travel: 630 mm C-axis: 360° (faceplate table) Control system: Siemens 840D Power Line Spindle speed: 10,500 – 20,000 rpm Spindle torque: 180 Nm Tool holder: HSK-A63, DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel ±120° left/right, swivel speed 50 rpm, and rotary table with faceplate Ø 280 mm/200 rpm) Max. workpiece size 940 x 650 mm for/on table with Knoll chip conveyor, model 750 K-1/150; year of manufacture 2009 Coolant system Bürener with paper belt filter, belt width 700 mm; year of manufacture 2009 Both control cabinets equipped with Rittal cooling units Various accessories such as different clamping fixtures by HILMA and Chick, etc., can be offered separately. i.D. *

Leto izdelave: 2026, stanje: novo, A modular system that you can easily adapt to your requirements: * Mechanical or electric mill * Rack-and-cloth press or basket press * Fruit presses in various sizes: 5 to 70 liters All home cideries offer: * Maximum juice yield thanks to hydraulic technology * Ergonomic and hygienic operation * Compact unit with mobile chassis Fjdpfx Aeuady Djbvepd RINK – Home Cideries – tailored to your needs: * The Standard Home Cidery includes a manual fruit mill and enables an hourly output of up to approx. 70 liters. * The Super Home Cidery includes a RINK grating mill and enables an hourly output of up to approx. 150 liters.

Leto izdelave: 2026, stanje: novo, Flow Pasteurizer Electric with Preheating of Juice in Coaxial Tube Heat Exchanger You utilize existing low-cost energy sources (e.g., solar, heat pump, biogas, etc.) even if the temperature level is insufficient for pasteurization. The remaining temperature increase to the required pasteurization level is achieved electrically (with lower energy demand). Components: Preheating: * Coaxial tube heat exchanger (KRWT) with thermal insulation (up to 60kW) thermal * Mixing unit incl. circulation pump ensures stable inlet temperature of heating water Flow Pasteurizer Electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW – 400 V * Stainless steel tank 150 ltr. with thermal insulation and stainless steel tube heat exchanger Fodpfxeuadm Do Abvopd * Automatic under-temperature protection (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Easy operation Total capacity up to 1,100 liters per hour ##### RINK – Pasteurization systems for over 30 years Proven technology – over 500 units in customer operation

Stanje: novo, Leto izdelave: 2026, Bag in Box Dosing Machine EF 600-NG – for filling fruit juices, wine, vinegar, oil, etc. Fpodpfx Ast U Iiyobved * High-quality stainless steel housing * User-friendly display with key information (current flow rate, remaining quantity, etc.) * Pre-set quantities: 1.5, 3, 5, 10, 20 liters * Freely adjustable quantities * Cleaning program * Comprehensive statistics * Minimal downtime thanks to double holder system * Compact design

Stanje: novo, Leto izdelave: 2026, 150 ltr. insulated tank with 13.5 kW / 400 V heater featuring automatic temperature cut-off, frame, and bag-in-box filling unit with bag holder Fsdpfx Ast U H Nrebvopd * Simple, safe, excellent value for money * No temperature fluctuations * Exceptionally gentle heating thanks to large heating surface (0.4 m²) * With thermostat: switches off at set temperature * Height-adjustable stainless steel frame – tank drains completely "Leisure time" during heat-up: approx. 40 min for 150 ltr. Hourly output approx. 150 ltr. Also available with 18 kW / 400 V heater – hourly output 180 ltr. Two-station bottle filling available No 400V connection available? Tank pasteurizer is also available with gas-fired condensing boiler. ##### RINK – pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Leto izdelave: 2026, stanje: novo, Continuous Pasteuriser Electric – up to 400 l/h * Water bath vessel * Electric heating 13.5 / 18 / 27 / 31.5 kW – 400 V * Tank (stainless steel), 150 l, with thermal insulation * Tube heat exchanger, stainless steel Fedpfx Aet Uzitsbvjpd * Automatic low-temperature safety cut-out (compressed air required) * Juice pump, stainless steel * Chassis with mountings for low-temperature cut-out and pump ##### RINK – Pasteurising systems for over 30 years Proven technology – more than 500 units in customer use

Leto izdelave: 2026, stanje: novo, Coaxial Tube Heat Exchanger for Connection to Existing Heating System / Heat Source * Coaxial tube heat exchanger (CTHE) with thermal insulation * Automatic low-temperature safety device * Stainless steel juice pump * Chassis Advantages: * Low maintenance * Suitable for media containing suspended solids * Simple, quick cleaning * Durable due to use of high-quality, robust components Optional: Mixing unit incl. circulation pump for stable inlet temperature of heating water Fjdpfx Ast Uzhcjbvepd ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer operation

Leto izdelave: 2026, stanje: novo, Instantaneous water heater with tube heat exchanger directly in the boiler water * compact design and low weight * energy savings up to 10%! * low maintenance * easy to clean * excellent price/performance ratio * available with oil or gas burner Technical data: * Boiler output: 100 kW * Hourly capacity: up to 1,350 l (10–78 °C) * Dimensions (H/W/D): approx. 160 x 110 x 160 cm * Empty weight: approx. 320 kg ##### RINK – Pasteurization systems for over 30 years Fpedpfet Hfygox Abvjd Proven technology – more than 500 units in customer use

Leto izdelave: 2026, stanje: novo, Instantaneous water heater with tube heat exchanger directly immersed in boiler water * Compact design and low weight * Energy savings of up to 10%! * Low maintenance * Easy to clean * Excellent price/performance ratio Fjdpfxst Hfyas Abvjpd * Available with oil or gas burner Technical specifications: * Boiler output: 80 kW * Hourly capacity: up to 1,100 liters (10-78 °C) * Dimensions (H/W/D): approx. 160 x 110 x 160 cm * Empty weight: approx. 280 kg RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Leto izdelave: 2026, stanje: novo, Durchlauferhitzer with tube heat exchanger integrated directly into the boiler water * Compact design and low weight * Energy savings up to 10%! * Low maintenance * Easy to clean * Excellent price-performance ratio * Available with oil or gas burner Technical specifications: * Boiler output: 60 kW * Hourly capacity: up to 850 liters (10-78 °C) * Dimensions (H/W/D): approx. 160 x 110 x 140 cm Fjdpfjt Hfx Aox Abvepd * Empty weight: approx. 230 kg ##### RINK - Pasteurization systems for over 30 years Proven technology - more than 500 units in use by customers

Leto izdelave: 2026, stanje: novo, Instantaneous water heater with tube heat exchanger directly in boiler water Fedpfot Eui Iox Abvjpd * Compact design and low weight * Energy savings up to 10%! * Low maintenance * Easy to clean * Excellent price/performance ratio * Available with oil or gas burner Technical data: * Boiler output: 40 kW * Hourly output: up to 550 liters (10–78 °C) * Dimensions (H/W/D): approx. 140 x 100 x 115 cm * Empty weight: approx. 190 kg ##### RINK – Pasteurization systems for over 30 years Proven technology – more than 500 machines in use by customers

Stanje: rabljeno, Leto izdelave: 2015, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, moč: 8,68 kW (11,80 KM), vhodni tok: 21 A, vhodna frekvenca: 50 Hz, Ponujamo ta rabljeni stroj za predelavo mesa MAJA-Maschinenfabrik SAH 3000 L, letnik 2015. Tip stroja: SAH 3000 L Serijska številka: I-45534 Leto izdelave: 2015 Faze: 3 AC Napetost: 400 V Frekvenca: 50 Hz Tok: 21,7 A Moč: 8,68 kW Hladilno sredstvo: R404A Količina hladiva: 10,0 kg Maks. tlak LP: 16 bar Maks. tlak HP: 25 bar GWP: 3922 CO₂ ekvivalent: 3922 g Fpedpoyrryxsfx Abvsd Če imate kakršnakoli vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Leto izdelave: 1982, stanje: rabljeno, Cylindroconical 580 hl fermentation and storage tank – glycol-cooled, 1 x cone cooling, 3 x shell cooling. – Swivelling cone – stainless steel – insulated – short standing support ring Machine (additional info): Outdoor tanks Fjdpfx Asvcq A Ajbvopd Capacity: 580 hl Operating pressure: 2 bar Operating temperature: 20 °C Cooling surface: 29 m² (1 x cone cooling; 3 x shell cooling) Material: stainless steel Orientation/installation: upright Base design: short support ring Features: tank cooling; swivelling cone; insulation; support frame; outlet DN100; CIP connection; 2 x temperature probes; sample valve