Horizontalni obdelovalni centri, 400–599 mm X-hod nakup rabljenega (88)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 669, potovalna razdalja osi X: 560 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, model krmilnika: MSC 502, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 - 650 mm Distance spindle nose to table center: 100 - 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 pos. Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 - 24,000 mm/min Creep feed rate: 0 - 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling unit High-pressure cooling Internal coolant supply Tool magazine: 60 pos. Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Hjdpfsyxm Irjx Afwsff Note: The shaft for loading must be provided by the buyer.

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No. 166 0821 Year of manufacture: 2008 Used, operational Travels: X-axis 600 mm Y-axis (change position) 600 (975) mm Z-axis 500 mm Control system: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measurement system: Absolute path measuring system X, Y, Z Spindles: Spindle speed (stepless) 20–10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK–A 100, horizontal arrangement side by side Spindle distance 600 mm Spindle bearing diameter 100 mm Motor spindles liquid-cooled, AC technology Workspace: Swivel carrier with ground teeth, max. load capacity 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tools HSK-A 100 chain magazine, place-coded Automatic pickup Tool change time (chip-to-chip) 4.9 sec. Max. tool diameter 100 mm 250 mm with free adjacent slot Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimal quantity oil lubrication (spindle) Chip conveyor Connection for central coolant system Hydraulic unit Maintenance unit Water recooler Full enclosure, suitable for crane loading Dimensions, with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Dimensions, without paper band filter: approx. 5.15 x 6.60 x 4.20 m Remarks: - Good condition according to age - Annual maintenance was regularly carried out by the previous owner Hfodpfx Afsy Ah Rcowof --- Sale does not include clamping devices --- --- No foundation parts included --- Immediately available, delivery date by arrangement EXW 72793 Pfullingen, Main components dismantled Transport to installation site to be arranged by customer/buyer! Dimensions/transport dimensions of the main machine parts: 1 pc Machine unit (X, Y, Z) mm 3,800 x 3,350 x 3,400 approx. 13,000 kg 1 pc Table unit mm 4,400 x 2,400 x 3,400 approx. 10,000 kg Plus peripheral units such as chip conveyor, small parts, sheet metal, etc. Available at short notice!!!!! Delivery date by arrangement

Stanje: dober (rabljeno), Leto izdelave: 2023, Krmilnik Fanuc. S hladilnim sistemom COSMOTEC, transporterjem ostružkov in filtrom hladilne tekočine KNOLL. Polne osi na rotacijskem/vrtilnem motorju. Razdalja med vreteni: 500 mm. Hodi osi (mm): 500, 940 (600+340 za menjavo orodja), 500. Hitrost pomika: --. Točnost pozicioniranja: 8 µm. Število osi: 5. Krmilniki: Fanuc i-Series. Orodjni vpenjalni sistem: HSK 80. Filtracija oljne megle: Da. Število orodij na vreteno: 30. Največje dimenzije orodij: max dolžina 360 mm; premer 199 mm, max 6 kg/orodje. Masa stroja (t): 19. Pogon: linearen. Vreteno stroja je varno pritrjeno za transport, varnostni nosilci so na svojem mestu. Hodpfxsyzy H He Afwsff

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Obecné údaje Hmotnost stroje: 6500 kg Ovládací jednotka Značka: SIEMENS Model: Sinumerik 840D Hlavní pohon Rozsah otáček vřetena: 18 000 ot/min Výkon motoru vřetena: 35 kW Počet os: 3 Hfedpfxjx R E Iuj Afwsf Posuvy Posuv v ose X: 560 mm Posuv v ose Y: 560 mm Posuv v ose Z: 510 mm Tato 4osá horizontální obráběcí centra DECKEL MAHO DMC 50 H byla vyrobena v roce 2001. Ideální pro přesné obrábění, nabízí robustní konstrukci a spolehlivý výkon. Pro více informací o tomto stroji nás kontaktujte. Oblasti použití Frézování

Stanje: rabljeno, Horizontal machining center, 6 pallets, OKUMA MA40 HAT 6P, OSP U100M CNC, 6 pallets, 400 mm x 400 mm, max. 400 kg, max. workpiece dimensions 600 x 710 mm. Spindle: BT40 / through-spindle coolant. 4th axis: 1° indexing. Tool changer: 100 positions. 200 tool holders available. Travels: X = 560 mm, Y = 610 mm, Z = 560 mm. Rapid traverse: 40 m/min. Installed and powered on at Mimu Machine Tools (Italy). Hodet Ek Slopfx Afwsff X travel: 560 mm Number of pallets: 6 Pallet size: 400 x 400 mm

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Machining Center Hurco VM 1 Maximum spindle speed: 8,000 rpm Travel: X: 660 mm Y: 406 mm Z: 508 mm Spindle operating hours: 2,000 Hfedpsi E Iacjfx Afwsf Comes with complete software options: DXF, thread cutting without chuck Includes various tools, Hilma vice, and drawer cabinet with tools

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 400 mm, pomik osi Y: 450 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840 D SL, skupna masa: 21.000 kg, največja hitrost vretena: 24.000 obr/min, This 5-axis horizontal machining center SCHMID SE 368 was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control, rapid traverses of 75/40/90 m/min in X/Y/Z, and a pallet changer. It is equipped with two NC rotary/swivel units, a 30-position tool changer, and an HSK-A63 tool holder. The maximum spindle speed is 10,000 rpm. Includes a chip conveyor and recooling unit. An excellent opportunity to purchase this SCHMID SE 368 horizontal machining center. Contact us for further details regarding this horizontal machining center. Additional equipment • Dual spindle • Shuttle table • 2 x 2 NC rotary/swivel units • Electrical cabinet system • Chip conveyor Knoll 600K-1 (2019) • Hydraulic unit • Filtration system • Recooling unit Lahntechnik KOF1803-100 (2020) • Number of tool magazine positions: 2 x 30 • Rotary table (NC / hydraulic clamping): n x 360°, vertical axis Machine advantages Technical machine advantages • Ibag three-phase main drive: S1-100% 40 kW / S6-40% 52 kW • Key spindle drive data (kW S1): 3 12 29 40 40 • Spindle speeds approx. (rpm): 1,000 5,000 10,000 20,000 24,000 • Torque approx. (Nm): 27 27 27 19 17 • Tool diameter with adjacent stations free: 125 mm • Swivel table (NC / hydraulic indexing): vertical axis, 0°–180°, max. swivel angle in combination with 5th axis: +/- 150° • Rotary table diameter: 400 mm, rotary table (horizontal axes U1-U2/V1-V2), rotary table (NC / hydraulic clamping): n x 360°, vertical axis, rotary table diameter: 330 mm • Pallet clamping: 2 zero-point clamping modules per table • Position measuring systems: absolute position measuring systems • Positioning tolerance X-Y-Z: 0.008 mm (VDI/DGQ 3441) Additional information Hfsdpoyyuwwsfx Afwsf Machine still under power.

Stanje: rabljeno, Leto izdelave: 1998, x-way 500 mm y-way 420 mm z-way 500 mm Spindle mount SK 40 Table clamping surface 700 x 400 mm Table load capacity 800 kg Control Heidenhain TNC 426 Hsdpfx Afjw Inrvjwsff Rated power 40 kVA Operating voltage 400 V Machine weight approx. 6.5 t Space required approx. 3.4 x 3.7 x 2.9 m The DECKEL-MAHO machining centers are suitable for both manual and automatic operation. --> Application area MILLING: --> Drilling: --> Face milling --> Spot facing --> Circular milling --> Circular drilling --> Thread milling --> Thread drilling --> Gear hobbing --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> incl. vertical tool changer with double gripper --> Tool magazine, variable position coding (VPC): --> Number of tools: 20 pcs --> Standard tool - max. diameter: 90 mm --> Special tool - max. diameter with free adjacent positions: 140 mm --> Tool length from spindle nose max.: 300 mm --> Tool weight max. 12 kg

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1995 ▪ Numerični krmilnik FANUC ▪ Hodi: X 840 mm, Y 840 mm, Z 760 mm ▪ Rezalno vreteno 10.000 vrt/min ▪ Moč motorja vretena 30 kW ▪ Stožčasti nosilec vretena ISO 50 (DIN 69871) ▪ Magazin orodij s 60 pozicijami ▪ 2 paleti velikosti 630 x 630 mm ▪ Neprekinjeno vrtljiva miza (4. os) ▪ Dovod hladilne tekočine skozi vreteno 40 bar z večjo posodo in papirnatim filtrom ▪ Hodsywugyopfx Afweff Odvajač ostružkov ▪ Sonda za prednastavitev/prisotnost orodja ▪ Elektronski ročni upravljalnik ▪ Teža 18.500 kg Vodila + vozički osi X in Z zamenjani leta 2022 Vretenska linija popolnoma obnovljena leta 2024 Menjalna omarica za orodja obnovljena leta 2024

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 630 mm, pomik osi Y: 600 mm, pomik po osi Z: 650 mm, dolžina podajanja os X: 630 mm, dolžina pomika po osi Y: 600 mm, dolžina podajanja os Z: 650 mm, proizvajalec krmilnikov: Fanuc, model krmilnika: MSX-516, širina mize: 500 mm, dolžina mize: 500 mm, največja hitrost vrtenja: 12.000 obr/min, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 60, Oprema: dokumentacija / priročnik, transportni trak za ostružke, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial number: 450 The machine is still powered and available at short notice. • P8 power supply valued at 1,500 EUR was replaced as recently as August 2024 • The spindle was overhauled in 2017 and has since primarily been operated in single-shift mode, as we mainly produce single parts and small batches – the machine has mostly been used for setup operations • Machine: Mori Seiki SH-50 Milling Machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with index table • Tool magazine: 60 stations (BT40) • Number of pallets: 2 (500mm x 500mm) • Travel: X 630mm / Y 600mm / Z 650mm • Spindle speed: 12,000 rpm Hodpsyt Nnpefx Afwsff • Chip conveyor Known defects: Rapid traverse speed on the X-axis has been reduced by 20% to extend the lifespan of the telescopic covers The sealing ring on the pallet changer is likely defective, causing an oil leak. As a temporary solution, we installed a ball valve; this must be opened when changing pallets, which we do infrequently. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or require further information, feel free to send us a message or call us.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 512 mm, pomik po osi Z: 530 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, model krmilnika: FANUC 18i, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 64, CNC horizontalni center s 4 osmi X Y Z B (360 000) Avtomatska menjava obdelovanca: 5 palet 400*400 Hedpsy Azakofx Afwoff Orodjevalnik: 64 BT40 Čas menjave orodja: 3 sekunde CNC krmilnik: Fanuc 18i Motor in pogon: Fanuc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, skupna masa: 9.950 kg, največja hitrost vretena: 14.000 obr/min, število osi: 4, Ta štiri-osni MORI SEIKI NH4000 DCG je bil izdelan leta 2013. Ima impresivne hode približno 560 mm v X- in Y-osi ter 630 mm v Z-osi. Stroj doseže največjo hitrost vretena približno 14.000 min⁻¹ in tehta skupaj z vrtljivo mizo približno 10.000 kg. Če iščete visokokakovostne možnosti obdelave, razmislite o vodoravnem obdelovalnem centru MORI SEIKI NH4000 DCG, ki je na voljo za prodajo. Kontaktirajte nas za dodatne informacije. • Električni priklop: 200 V / 3 faze / 50 Hz • Krmiljenje: MORI SEIKI Dodatna oprema Hfjdpfxsyw Rh To Afwsf • CONSEP transportni trak za odrezke • KNOLL filtrirna naprava za hladilno tekočino, model FKA/500/KF110 (2013)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, skupna masa: 9.950 kg, največja hitrost vretena: 14.000 obr/min, število osi: 4, Ta štiriosna MORI SEIKI NH4000 DCG je bila izdelana leta 2012. Ima impresivne pomike približno 560 mm v osi X in Y ter 630 mm v osi Z. Stroj doseže maksimalno hitrost približno 14.000 vrt/min in je opremljen z vrtljivo mizo, transportnim trakom za ostružke CONSEP in filtrom za hladilno tekočino KNOLL. Če iščete visokokakovostne možnosti obdelave, razmislite o horizontalnem obdelovalnem centru MORI SEIKI NH4000 DCG, ki ga imamo v prodaji. Za dodatne podrobnosti nas kontaktirajte. Hodpjyw N R Hofx Afweff • Priključne specifikacije: 200V / 3 faze / 50Hz • Z vrtljivo mizo • Krmiljenje: MORI SEIKI Dodatna oprema • Transportni trak za ostružke CONSEP • Sistem filtracije hladilne tekočine KNOLL FKA/500/KF110 (2012)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 630 mm, obremenitev mize: 400 kg, skupna masa: 10.000 kg, največja hitrost vretena: 14.000 obr/min, število osi: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travel distances of approximately 560 mm on both the X and Y axes and 630 mm on the Z axis. The machine offers a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load capacity of 400 kg. If you are looking for high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining center we have for sale. Contact us for further details. Hedpfjyw N I Sjx Afwsff • Available units: 2 • CNC horizontal machining center (Mori 1) MORI SEIKI NH4000 DCG • Power connection specifications: 200V / 3-phase / 50Hz • Table dimensions (W x D): approx. 40 x 40 cm • Control: MORI SEIKI • Approx. 10,000 kg • Horizontal CNC machining center (Mori 2) MORI SEIKI NH4000 DCG • Operating hours: 22,031 • Power supply: 200V / 3-phase / 50Hz • Control: MORI SEIKI • Approx. 9,950 kg Additional equipment: • Mori 1 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filtration system (2011) • Mori 2 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filtration system (2011)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Control: Siemens Sinumerik 840D Hfsdpfx Aoyrir Sefwef Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed: 15,000 rpm 2-station pallet changer, 400 x 400 mm Tool magazine for 40 tools, SK 40 Paper filter Chip conveyor

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 560 mm, pomik osi Y: 610 mm, pomik po osi Z: 625 mm, nazivna (navidezna) moč: 49 kVA, proizvajalec krmilnikov: Okuma, model krmilnika: OSP-P200M, širina mize: 400 mm, dolžina mize: 400 mm, obremenitev mize: 400 kg, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 15.000 obr/min, delovne ure vretena: 58.000 h, dovod hladilne tekočine: 30 letvica, moč vretenovega motorja: 22.000 W, nos vretena: SK40 Big Plus, število vreten: 1, število mest v zalogovniku orodij: 100, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, menjalnik palet: samodejen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Dobro ohranjeno 3-osno horizontalno obdelovalno središče Okuma MA-400HA naprodaj Modul osi Z je potrebno obnoviti. Ko je v hitrem pomiku izbrana hitrost nad 30 % maksimalne hitrosti, os ne deluje. Stroj je še vedno v vsakodnevni proizvodnji in si ga lahko ogledate. Stroj se prodaja vključno z: - 100 kosov SK držal (brez orodij) - Merilni sistem Renishaw OMP60, vključno s sondo in vtičnico (kontrola preloma orodja in merjenje dolžine orodja z mehanskim tipalom) - Razširjena krmilna funkcionalnost (večja shramba za ničelne točke, korekcije orodja, zrcaljenje osi, ročno merjenje, povečevanje/pomanjševanje) - DNC-DT vmesnik - 30 bar notranje hlajenje - 6 palet vključno z držali za obdelavo okroglih delov. Najmanjši vpenjalni premer 160 mm, največji vpenjalni premer 370 mm Hfsdpfeyvga Usx Afwof - Mayfran Consep 2000 II transportni trak za odrezke, vključno z napravo za čiščenje hladilnega sredstva brez filtračnih vložkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 23.663 h, potovalna razdalja osi X: 560 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D, skupna višina: 2.500 mm, skupna masa: 10.600 kg, število osi: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, and Z travels of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12,000 rpm. The machine is equipped with an SK40 spindle taper, a tool magazine with 60 positions, and four 400x400 mm pallets, with the fourth axis indexed in 1-degree increments. Take this opportunity to purchase this DECKEL MAHO DMC 55H duoBlock horizontal machining center. Contact us for more information about this machine. Additional Equipment • 4 pallets 400 x 400 mm, included with the machine, 4th axis indexed in 1-degree increments • Workpiece probe • Through-spindle coolant • Large coolant tank with automatic coated filter paper Machine Advantages Technical Advantages • Table size: 400 x 400 mm • Tool magazine: 60 positions Additional Information Machine still under power Dimensions Machine depth 6000 mm Hsdpfx Afoytumdswjff Technical Specification Through-spindle coolant: Yes

Stanje: rabljeno, Leto izdelave: 2017, Technical Details: X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm Control: Celos Siemens 840D SL Operate ERGOline Multitouch Spindle speed: 20 – 20,000 rpm Spindle motor: 25/35 kW Spindle torque: 86 / 130 Nm Tool holder: HSK-A63 Tool magazine capacity: 60 positions Max. tool diameter: 70 mm Max. tool diameter with adjacent slots free: 170 mm Max. tool length: 450 mm Max. tool weight: 12 kg Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Table load capacity: 400 kg Hedpoyqybbofx Afwoff Rapid traverse (X/Y/Z): 60 m/min Feed rates (X/Y/Z): 60 m/min Internal coolant supply: 70 bar Machine weight approx.: 8.5 t Overall dimensions: 3200 x 4800 x 2900 mm Equipment: Rotoclear view window 4-color signal lamp Electronic handwheel Tool breakage and tool length measurement Coolant shower Renishaw spindle probe preparation (preparation only) HSK taper cleaning station with brushes Horizontal machining center with Siemens-Celos control, 4th axis rotary table, magazine for 123 HSK-A63 tools, and 40 bar internal coolant supply. The machine has just received a new spindle.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 380 mm, pomik po osi Z: 380 mm, skupna višina: 2.380 mm, skupna dolžina: 1.450 mm, skupna širina: 17.600 mm, skupna masa: 3.500 kg, dolžina mize: 800 mm, širina mize: 480 mm, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 20 obr/min, For sale: A DMU brand machining center, model 50 V A new spindle was installed recently. The machine is in excellent condition and fully operational; machining in the hundredth-millimeter range is possible without any issues. Technical Data: Brand: GRUNDIG Model: MillPlus Spindle speed range: 20 – 8000 RPM Number of axes: 3 X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 380 mm Table length (external): 800 mm Table width (external): 480 mm Spindle taper: SK40 Dimensions (L*W*H): 2450*1760*2380 mm Weight: 3500 kg Upon request and for an additional charge, loading and transport can be organized throughout Europe. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading – Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Are you looking for a high-quality but affordable metalworking machine for your production needs? Or do you wish to sell your machine? For further information or contact options, please visit our website. Hedpfx Aordf Ebefwoff

Stanje: rabljeno, Leto izdelave: 2015, X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm Control: M 730 BM MAPPS IV Distance spindle center to table: 80 – 640 mm Distance spindle nose to table center: 70 – 730 mm Max. spindle speed: 12,000 rpm Main spindle drive power: 15 / 11 kW Tool holder: SK 40 Spindle diameter at front bearing: 80 mm Number of pallets: 2 positions Working height: 1,050 mm Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm B-axis: 0.001° Indexing time 90°: 1.3 sec Pallet change time: 8.0 sec Hfjdpfx Ajx Hpytofwjf Number of tool stations: 60 positions Tool holder: SK 40 Max. tool diameter: 70 mm Max. tool diameter with adjacent pockets empty: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool change time (tool-to-tool): 0.9 sec Chip-to-chip time: 2.8 – max. 9.9 sec Maximum feed rate: 60,000 mm/min Rapid traverse (X / Y / Z): 60 m/min Total power requirement: 35 kVA Machine weight approx.: 7.9 t Space requirement approx.: 5.5 x 3.5 x 2.6 m CNC Horizontal Machining Center MORI SEIKI - NHX 4000 - Pallet changer - WITHOUT clamping towers

Stanje: rabljeno, Leto izdelave: 2015, x-axis travel: 560 mm y-axis travel: 560 mm z-axis travel: 660 mm Control: M 730 BM MAPPS IV Distance spindle center to table: 80 – 640 mm Distance spindle nose to table center: 70 – 730 mm Max. spindle speed: 12,000 rpm Main spindle drive power: 15 / 11 kW Tool holder: SK 40 Spindle diameter (front bearing): 80 mm Number of pallets: 2 positions Working height: 1,050 mm Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm B-axis: 0.001° Indexing time 90°: 1.3 sec Pallet change time: 8.0 sec Hfjdjx Hpymepfx Afwof Number of tool pockets: 60 positions Tool holder: SK 40 Max. tool diameter: 70 mm Max. tool diameter with free adjacent pocket: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool-to-tool change time: 0.9 sec Chip-to-chip time: 2.8 – max. 9.9 sec Rapid traverse rate: max. 60,000 mm/min Rapid traverse (X / Y / Z): 60 m/min Total power requirement: 35 kVA Machine weight: approx. 7.9 t Space requirement: approx. 5.5 x 3.5 x 2.6 m CNC Horizontal Machining Center MORI SEIKI - NHX 4000 – Pallet changer – WITHOUT clamping towers

Stanje: rabljeno, Leto izdelave: 2008, x-hod 500 mm y-hod 560 mm z-hod 500 mm Krmiljenje Matsuura G-Tech 30i maks. hitrost vrtenja 20.000 min⁻¹ Število orodnih mest 210 poz. Hsdpfx Afjyigaljwoff Skupna potrebna moč 52 kW Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru videti v delovanju. Tehnične značilnosti: - 5-kratnik menjalec palet - nova vretena, vključno s keramičnimi krogličnimi ležaji - nov hladilnik vreten Dodatna oprema, prikazana orodja in vpenjalna sredstva so priložena samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb, napak v tehničnih podatkih in vmesne prodaje!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 13.321 h, potovalna razdalja osi X: 560 mm, pomik osi Y: 640 mm, pomik po osi Z: 640 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: SmoothG, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 35.000 W, število mest v zalogovniku orodij: 60, število osi: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control unit, through-spindle coolant at 32 bar, and a Renishaw OMP 60 probing system. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it is ideal for precise and efficient machining operations. Take the opportunity to purchase this HCN 4000 horizontal machining centre from Mazak. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets: 2; Indexing in 1° increments • Control: Mazatrol SmoothG • Coolant/Air: Through-spindle coolant 32 bar; Through-spindle air supply; Niagara flushing • Functions: Rigid tapping (thread cutting without floating chuck); G00 indexing function • Compliance: CE marking Additional equipment • Renishaw OMP 60 probe • Renishaw Inspection+ (2022 version) • Tool length measurement system Hsdox Enllopfx Afweff • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper size: SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: OKUMA, največja hitrost vretena: 8.000 obr/min, število osi: 4, This 4-axis Okuma MA-400HA horizontal machining centre was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking for high-quality milling capabilities, you should consider the Okuma MA-400HA machine we have for sale. Contact us for further information. Additional equipment • Tool changer gearbox is defective Machine advantages Hsdpfxox U Trvj Afwoff Technical advantages of the machine: • Pallet size: 400x400 mm / 2 pallets • B-axis rotary table (reversible) The following repairs have been carried out: 12/2022 – Replacement of the control unit (U2319), replacement of the ATC gearbox, replacement of the X-axis telescopic cover (H1090-0025-98-2). Small parts have been replaced regularly (hoses, sensors, bulbs, etc.). The spindle is in good condition with no major damage. The machine produced accurately and within tolerance up to its last use. Regarding the non-functioning tool changer gearbox – there is increased backlash in the gearbox, so during tool change the tool does not remain perfectly aligned with the spindle axis upon entry. The bearing/cams in the gearbox are probably damaged. Service and maintenance have been carried out by an authorised OKUMA service provider.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 510 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, moč vretenovega motorja: 15.000 W, skupna višina: 2.424 mm, skupna masa: 10.800 kg, teža orodja: 10.000 g, število osi: 4, This Kitamura Mycenter H400 was manufactured in 2002. It features full simultaneous 4-axis capability, a pallet changer, and a FANUC 15M control system. The machine has a maximum workpiece diameter of Ø600 mm and a pallet size of 400 × 400 mm. With a spindle speed range of 20 – 10,000 rpm and a tool magazine capacity for 100 tools, you should take the opportunity to purchase this Kitamura Mycenter H400 horizontal machining center. Contact us for further details. • Table/Pallet: • Pallet size: 400 × 400 mm (15.7" × 15.7") • Pallet indexing: 1° • Maximum workpiece diameter: Ø600 mm (23.6") • Maximum workpiece height: 510 mm (20") • Maximum pallet load: 400 kg • Travels: • B-axis: 360° (continuous) • Spindle: • Taper: NST No. 40 • Maximum torque: 191.7 Nm • Feed rates: • Rapid traverse (X/Y/Z): 24 m/min • Cutting feed rate: 0 – 10,000 mm/min • ATC (Automatic Tool Changer): • Magazine capacity: 100 tools • Tool selection: Random • Maximum tool diameter: Ø95 mm (adjacent tools) / Ø150 mm (adjacent pockets empty) • Maximum tool length: 350 mm Hfodpfxsyid Tco Afwef • Accuracy: • Positioning: ±0.005 mm • Repeatability: ±0.002 mm • Machine dimensions: • Footprint (approx.): 3,495 × 4,044 mm