M 6090 nakup rabljenega (34.097)

Stanje: novo, Bauer DK66 SZ3-2211/163 L menjalni motor M 1609019-02, serijska številka po fotografiji, razmak med montažnimi luknjami: 91 x 91 mm, Ø pogonske gredi: 25 mm, neuporabljen z sledovi skladiščenja, 100% funkcionalen, dobava kot na slikah. Hfodpfx Aei D E A Uoh Djn

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 200 kg, Leto izdelave: 2000, stiskalna sila: 2 t, globina grla: 150 mm, Hydraulic Press Atsugi Model AP-2-M Load Capacity Range: 5–20 kN Hfodpfx Asvbdyfoh Den Stroke (mm): 150 Operating Speed: 60 mm/s Rapid Advance Speed: 73.8 mm/s Ready for operation Specifications Open Height: 250 mm Open Depth: 150 mm Table Size: 450 x 320 mm Motor Specification: 3-phase AC 200V, 4-pole, 1.5 kW Two-hand operation. Mobile worktable Operating oil/quantity: Daphni Hydraulic 46/6L Total Weight (kg): 200 Dimensions Height (mm): 987 Width (mm): 505 Depth (mm): 735

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Extraction System L+M EcoCell 3.9-1200 C TECHNICAL DATA Manufacturer: L+M AG Model: EcoCell 3.9-1200 C Year of manufacture: February 2020 Airflow rate: 3,000 m³/h Voltage: 400 V Current draw: 7.60 A Power: 5.50 kW Frequency: 50 Hz ATEX Compliance: ATEX 2014/34/EU Control unit: Reco RM-DPC Micro FP Filter status display: FC-240 Spark detection: Control Logic PAN-705 Spark Control Panel Filter elements: 9 pieces SCOPE OF DELIVERY Hfodpjxflx Tefx Ah Dsn Including (non-exhaustive list): - Extraction system L+M EcoCell 3.9-1200 C - Filter status display - Spark detection system - 9 x filter elements - VDL rotary airlock with electric drive - Control cabinet with operating elements - Additional WESCO separator Exact scope of delivery as per photo series The extraction system L+M EcoCell 3.9-1200 C was manufactured in February 2020 and provides a powerful and safe solution for industrial extraction and filtration requirements. With an airflow rate of 3,000 m³/h, a rated power of 5.50 kW, and robust ATEX certification according to 2014/34/EU, this unit is ideally suited for use in potentially explosive atmospheres. Its state-of-the-art Reco RM-DPC Micro FP control unit, together with the FC-240 filter status display, enables precise monitoring and operation. Additional safety is ensured by the integrated PAN-705 spark monitoring system. Nine high-performance filter elements provide efficient dust particle separation. Equipment also includes a VDL rotary airlock with motor drive, a control cabinet with operating elements, and an additional WESCO separator. This equipment combination guarantees a reliable, safe, and durable dust extraction solution for demanding industrial applications. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.500 kg, Le positionneur Siegmund M convient parfaitement aux travaux de soudage, d’assemblage et de maintenance. Le positionnement s’effectue via un volant manuel. Positionneurs avec capacité de charge jusqu’à 1 500 kg. Couple: 900 Nm Volant à poignée Ø 315 mm Compatibilité étrier en U: système 28 Longueur max. de l’étrier en U: 3 000 mm A - Hauteur de travail: 850 mm B - Hauteur de la colonne: 955 mm Hjdpfx Asvlgzash Dsfn C - Hauteur totale: 1 140 mm D - Largeur de la plaque de base: 600 mm E - Longueur de la plaque de base: 600 mm Prix sans accessoires 3D. Tarifs des accessoires 3D, pièces en fonte lourde, épaisseur de paroi 28 mm usinée, tous prix spéciaux neufs: Étrier d’angle d’origine 28 forme U 500mm x 200mm x 200mm (supplément 500 €) ou 2000mm x 200mm x 200mm (supplément env. 1 000 €) ou 2400mm x 200mm x 200mm (supplément 1 300 €) ou avec plateau à trous de 28, 2000mm x 1000mm x 200mm (supplément 2 000 €) Plusieurs positionneurs disponibles.

Stanje: zelo dobro (rabljeno), Precision measuring and presetting device for CNC tools from the renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, along with Heidenhain ND1202T Tool-Chek electronics. The device is in very good condition, fully functional and complete. Technical data and equipment: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Readout system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optics with measuring camera and LCD screen Hedpjxn Ax Aofx Ah Dofn • Rotary table with holders and two-axis adjustment system • Measuring range X/Z axes: up to approx. 400 mm • Axis control from KELCH panel (joystick + function keyboard) • Digital readout, menu available in German and English • Supplied with original documentation and complete set of connectors Condition: • Used, fully functional • Very clean unit from a German toolroom • All axes move smoothly, screen responds correctly • Ready for operation Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools before installation in a CNC machine. The optical system with Pico LCD enables visual measurement of tool length, diameter, and geometry. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools.

Stanje: dober (rabljeno), Blumer Atlas D-18 M Stroj za izsekavanje etiket Profesionalen stroj švicarske izdelave. Popolno stanje, kot nov. Blumer je vodilni na področju izsekavanja etiket. 100% delujoč in pripravljen za proizvodnjo. To je model, ki je trenutno v proizvodnji. Tehnične specifikacije: Največji format: 150x180mm Najmanjši format: 24x45mm Cikli: 18-6/min Višina sklada: 120mm Teža: 600kg Stroj je opremljen s hidravlično enoto za hitro delovanje. Transportni trak ob izhodu. Hedoxmu T Nopfx Ah Djfn Modul za pozicioniranje orodja, rezila za rezanje odpadkov in matrica.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 15.036 h, The machine is available immediately. If interested, please get in touch to arrange a viewing appointment. Hfjdpfxjv Incde Ah Don

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Hfjdpfx Aovllxdoh Dsn Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: rabljeno, Leto izdelave: 2012, Générateur d'air chaud occasion Année de fabrication : 2012 avec brûleur soufflant au fioul (testé selon DIN 4794) version suspendue Puissance calorifique nominale : max. 120 kW Débit d'air chaud : 9 200 m³/h Type de combustible : fioul Hodpfxjw Nab So Ah Djfn Mode de fonctionnement : intermittent Composé essentiellement de : - Enveloppe en tôle d'acier double paroi, isolée, galvanisée - Chambre de combustion en acier spécial résistant à la chaleur avec échangeur de chaleur - Ventilateur radial avec moteur triphasé, puissance 2,2 kW - Brûleur soufflant au fioul - Cheminée en inox double paroi isolée avec trappe de nettoyage - Armoire de commande avec commutateurs de sélection - Régulateur numérique avec minuterie Env. 20 m de conduit supplémentaire avec grilles d’aération réglables verticalement et horizontalement inclus, avec régulation du débit volumique 4 ventilateurs de recyclage d’air avec régulation de température différentielle en continu Disponibilité : rapide Lieu de stockage : Hagen, Rhénanie-du-Nord-Westphalie

Stanje: novo, Column Pallet, Manurack, Mobilrack – New Mobile warehouse racks are designed for storing goods with unconventional dimensions and have a dual purpose. They can be used as transport pallets, and by mounting four support tubes, you can build warehouse racks that can be transported without unloading the stored goods. Both heavy and light products can be stored on the metal column pallet. Mobilrack can instantly increase warehouse storage space thanks to its simple and quick assembly. At the end of the season, the column pallet can be disassembled, saving warehouse space. Offer applies to single column pallet /base/: Product code: MTP000276 Length: 154.5 cm Width: 118 cm Height: 31 cm Load capacity: 1,500 kg Finish: hot-dip galvanized Price: €82 / piece Offer applies to double column pallet /base/: Product code: MTP000283 Length: 202.5 cm Width: 118 cm Height: 31 cm Load capacity: 2,000 kg Finish: hot-dip galvanized Price: €120 / piece Each column pallet requires 4 support tubes, available in various sizes according to customer needs: 120, 150, 200 cm. Offer applies to Manurack rack tube 120×6 cm: Product code: MPP000706 Height (cm): 120 Thickness (mm): 2.9 Diameter (cm): 6 Price: €7 / piece Offer applies to Manurack rack tube 150×6 cm: Product code: MPP000704 Height (cm): 150 Thickness (mm): 2.9 Diameter (cm): 6 Price: €8.50 / piece Offer applies to Manurack rack tube 200×6 cm: Product code: MPP000705 Height (cm): 200 Thickness (mm): 2.9 Diameter (cm): 6 Price: €11.50 / piece Prices apply to wholesale quantities (full truckload) for export outside of Poland; please contact us for details. For wholesale and retail prices within Poland, please contact us. * Large quantities available. * Delivery possible throughout Europe. * The above offer does not include transport costs. Hfjdpfeu Trpyex Ah Dsn * Location: Chmielów/Tarnobrzeg, Poland.

Stanje: zelo dobro (rabljeno), Precizni delavniški mikrometer priznane nemške znamke Mahr, model Marameter M, namenjen za zelo natančne meritve zunanjih premerov v območju 0–40 mm. Naprava je v zelo dobrem stanju, popolnoma funkcionalna, shranjena v originalnem zaščitnem lesenem kovčku. Specifikacije: • Merilno območje: 0 – 40 mm • Tip: Marameter M • Proizvajalec: Mahr (Nemčija) • Kataloška številka: 3206064 • Namen: natančno merjenje zunanjih premerov / gredi / cilindričnih elementov • Kovinsko, proti obrabi odporno ohišje • Roka z zamenljivimi merilnimi nastavki • Visoka stabilnost in ponovljivost meritev • V kompletu originalna lesena škatla Stanje: • Rabljeno, odlično ohranjeno • Zadnja kalibracija: 2023 • Pripravljen za uporabo v merilnici ali laboratoriju. Hfsdpfx Ahjxmlgte Dsn

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, VSM3.0DRO A-M Stroj za glodanje sedežev ventilov – nova naprava. Digitalni prikazovalnik na stroju za glodanje sedežev ventilov. Visoko natančen stroj za glodanje sedežev ventilov, posebej zasnovan za večventilske glave motorjev. Obdelovalna zmogljivost: od 16 mm do 90 mm. Spremenljiva hitrost od 100 do 1200 vrt/min. Največja širina glave motorja: 500/19,7 mm/inč Največja višina glave motorja: 450/17,7 mm/inč Naklon glave motorja: +42°- -42° Največji naklon vretena: 5° Pomiki: - Prečni: 930/37 mm/inč - Vzdolžni: 40/1,6 mm/inč - Vreteno: 200/8 mm/inč Hfjdpfx Ahsvmpnlo Den Moč vretena: 1,8 kW Maksimalna hitrost vrtenja vretena: 0–1000 vrt/min Napajanje: 380V/50Hz 3 faze ali 220V/60Hz 3 faze Priključek za zračni kompresor: 6/87 bar/psi Stopnja hrupa: pri 400 vrt/min 72 dBA; pri 1200 vrt/min 82 dBA Teža: 1050/2310 kg/funt Dimenzije (D x Š x V): 1040 mm x 1050 mm x 2170 mm

Stanje: rabljeno, Leto izdelave: 2001, Podmizna kapna žaga HM-D 6500-R Hfjdpfx Aowng Sijh Dsn Serijska številka: 319 Priključna napetost: 400V - 11KW Teža: 2450 kg Maksimalni premer žaginega lista: 550 mm Minimalni premer žaginega lista: 500 mm Luknja: 30 mm Dolžina samodejnega podajanja: neznana Dobavljivo od avgusta 2024 - Leto izdelave: 2001 - Dokumentacija na voljo: Ne - Serijska številka: 319 Finančne informacije DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dobava in odkup možna kadar koli za vso industrijsko opremo Yorick Diebels

Stanje: dober (rabljeno), Leto izdelave: 2011, Hioki 3154 Digital M Hitester Manufacturer: Hioki, Japan Model: 3154 Digital M Hitester Year of manufacture: 2011 Hfsdjvahxcspfx Ah Don For further technical data, please refer to the type plate shown in the attached photos. Otherwise, please observe the following notes or call us if needed. Thank you. • Condition: Please see the photos; the item was kept in stock as a spare part, comes from a spare parts warehouse, or was removed from an existing system. • Further information: Please note that the item may have already been used. Therefore, some scratches, stains, discolorations, or remaining cable harnesses may be present. • The item is offered as used, without any guarantee or warranty. • Some of our items have been dismantled from operational production equipment, or are unused stock items. • Articles have been stored for several years and are expressly offered as "used goods", even if they have been rarely used or only kept as spare parts. • Deviations from technical data as well as errors in the description of the item are possible and subject to change. • Condition/packaging as shown in the photos or as individually agreed upon. • If you have any questions or would like additional photos, please contact us. • For shipping outside of Germany, please inquire, as shipping costs may vary. • For technical or other questions, please feel free to contact us at any time. • Viewings or self-collection can of course be arranged by appointment. If you have any questions or wish to arrange a viewing, please get in touch. Thank you for your interest.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SL314020150BL, UV-LED osvetljevalnik M&R Starlight 3140 vključno z "podstavkom" in "CTS predelovalnim kompletom" Hsdpfoxlg Hrjx Ah Defn Model: M&R Starlight UV-LED osvetljevalnik Maks. format okvirja: 79 x 102 cm Leto izdelave / nakupa: maj 2020 Nakupna cena: cca 8.300 € Uporaba: skoraj nenačrtovana, tehnično in vizualno v zelo dobrem stanju Posebnosti: energijsko varčna UV-LED tehnologija, dolga življenjska doba, nizko vzdrževanje, idealno za visoko precizne ekspozicije v sitotisku Ogled in preizkus po dogovoru možen.

Stanje: rabljeno, Daewoo Puma 230 M CNC stružnica z osjo C Leto: 2000 Tehnične specifikacije: - Krmilna enota: Fanuc 18i-T - Premer struženja: Pribl. 290–400 mm - Dolžina struženja: 500–560 mm - Os C - Revolverska glava: 12 postaj, (gnana orodja) - Hitrost vretena: 4500 o/min - Moč vretena: 15 kW - Kapaciteta palice: 65 mm - Pomik X osi: 205 mm - Pomik Z osi: 580 mm - Konik: programabilni (proti-vreteno) - Transporter ostružkov: na voljo - Podajalnik palic: CK LOAD - Vpenjalna glava: KITAGAWA B210, 3-čeljustna Hsdpfx Ajxnw Avjh Djfn - Priložena bodo gnana orodja znamke Somme.

Stanje: novo, 21.25 m² mezzanine platform including staircase, railings on two sides, top edge 300 cm, 500 kg/m² load-bearing capacity, immediately available from stock, accessible with pallet truck, modular platform system, steel mezzanine, storage level Data: - Length: 5000 mm Hjdpfx Asxny Ibjh Djfn - Width: 4250 mm - Size can be expanded on request - Clear height under platform: 2612 mm - Support grid: 4605 x 3850 mm - Additional floor overhang: 200 mm - Supports, staircase, railing posts, cross bracing & dome struts powder-coated in RAL 7016 - Handrail, knee rail, roll-off edge, primary & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top side natural, underside white - New in stock in Wietmarschen - AVAILABLE IMMEDIATELY Mezzanine platform consists of: - 04 x supports - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross bracing - 02 x dome struts - 10 x chipboard panels - 01 x staircase, 37° incline - Approx. 8.25 linear meters of railings - Incl. connecting material & bolts -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS-- Price: 5,026.00 € net 5,980.94 € gross You will receive an invoice with VAT shown separately. Transport: Delivery can be organized by our partner haulage company on request. Costs depend on postal code. Assembly: Our trained staff is available to assist with the professional assembly and disassembly of your industrial equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects—from planning and ordering through to installation. Are you interested or have questions? Simply contact us by message or phone. Our phone number is listed on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am - 3:00 pm. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Stanje: rabljeno, Leto izdelave: 1990, Fully automatic KEG processing machine for internal cleaning, steaming, and filling of KEG containers with beer, wine, and soft drinks. Designed for filling 20-litre, 30-litre, and 50-litre KEGs with flat fittings. Rated capacity: 60–70 KEG/h, depending on the selected treatment cycles. 9 treatment stations: - External washer - 1 centring station - 5 internal cleaning stations - 1 filling station - 1 draining and neck rinsing station CIP station: - Hot water tank, 250 l - Mixed water tank, 250 l - Caustic tank, 250 l - Acid tank, 250 l Machine (additional): Keg filling line Hfjdpfx Ahsw Tlnrs Den Capacity: 70 KEG/h, depending on selected treatment times Voltage: 380 V Frequency: 50 Hz Formats: Stainless steel or aluminium KEGs, with or without jacket, with flat fitting, 20, 30 and 50 litres Material: Piping, valves, and all major mechanical components are predominantly made of stainless steel (corrosion-resistant). Equipment: External washer, centring station, 5 internal cleaning stations, filling station, draining and neck rinsing station, hot water tank, mixed water tank, caustic tank, acid tank.

Stanje: rabljeno, Podmiza žagalnica HM-ZN 8500 Serijska številka: 277 Priključilna napetost: 400V - 6,6 kW Teža: 1400 kg Največji premer žaginega lista: 700 mm Najmanjši premer žaginega lista: 600 mm Premer osi: 30 mm Nagibni žagin list Dolžina avtomatskega podajalnika: 9500 mm Dolžina transportnega traku: 4300 mm Skupne dimenzije: 15000x1500x1800 mm (DxŠxV) Hfsdpfownhz Ssx Ah Dsn - Dokumentacija na voljo: Ne Finančne informacije DDV: Naveden cena je brez DDV DDV/obdavčitev diferenciala: DDV je odbiten za podjetja Dostava in odkup možna kadar koli za vso industrijsko opremo Yorick Diebels

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna širina: 25.000 mm, skupna dolžina: 100.000 mm, skupna višina: 12.500 mm, Lahka hala (jeklena konstrukcija), široka 25 m, dolga 100 m in visoka 12 m; v zelo dobrem stanju, jeklena konstrukcija je takoj pripravljena za montažo; hala je ponujena popolnoma, vključno s ponjavo in montažnimi deli; snežna obremenitev 200 kg/m² in vetrna obremenitev 0,3 KN/m²; organiziramo lahko nakladanje in dostavo; organiziramo lahko tudi montažo ter montažo ponjave oziroma novo ponjavo. Hedpfxov Iltao Ah Dofn

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Stroj za lupljenje čebule Hsdpfxefn N U He Ah Dofn

Stanje: novo, skupna dolžina: 5.000 mm, skupna širina: 4.250 mm, 21.25 m² Mezzanine Storage Platform, Top Edge 300 cm, 500 kg/m² Load Capacity, Immediately Available from Stock, Forklift/Floor Jack Accessible, Modular System Platform, Steel Mezzanine, Warehouse Level Specifications: - Length: 5,000 mm - Width: 4,250 mm - Size can be expanded upon request - Clear height beneath platform: 2,612 mm - Column grid: 4,605 x 3,850 mm - Plus 200 mm floor covering overhang - Columns, cross-bracing, and tie rods powder-coated in RAL 7016 - Main & secondary beams galvanized - Flooring: 38 mm particle board P6, top natural finish & underside white - New stock from Wietmarschen warehouse - IMMEDIATELY AVAILABLE Composition: - 04 x columns - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross-bracing - 02 x tie rods - 10 x particle boards - Including connecting material & screws -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2,590.00 net €3,082.10 gross You will receive an invoice showing VAT separately. Transport: Delivery can be arranged via our partner freight forwarder upon request. Shipping cost depends on postal code. Assembly: Our trained staff are available to professionally assemble and dismantle your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering to assembly. Hfjdpfjxny Emox Ah Don Interested or have questions? Contact us easily by message or phone call. Our phone number is listed on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: rabljeno, Leto izdelave: 1988, Naprava za čiščenje in polnjenje Keg sodov. Stroj (dodatek): čiščenje in polnjenje Učinkovitost pribl.: 40 Keg/h Napetost: 380 voltov Frekvenca: 50 hertzov Stisnjen zrak: 5,5 bar Hsdew Tapqopfx Ah Dofn Formati: 10l, 20l, 30l, 50l Keg, ploski priključek Upravljanje / nadzor: gumb, stikalo, Siemens Simatic OP 396 Pozicija: samostoječe Oprema: 3 postaje, valjčni transporterji, z zaporo za vstop sodov, CIP posoda,

Stanje: rabljeno, Leto izdelave: 2002, - Leto izdelave: 2002 - Dokumentacija na voljo: Ne Finančne informacije DDV: Navajena cena ne vključuje DDV DDV/Obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo Yorick Diebels Hfodpfewnh T Ijx Ah Dsn

Stanje: rabljeno, skupna višina: 1.550 mm, skupna dolžina: 1.400 mm, skupna širina: 1.100 mm, - Maks. dolžina žaginega lista [mm]: 6000 - Maks. višina reza [mm]: 230 - Dolžina podajalne mize [mm]: 6000 - Možnosti: Avtomatski podajalni sistem - Dokumentacija na voljo: Ne - Transportne mere: 1400 mm x 1100 mm x 1550 mm (d x š x v) - Transportni paketi [kos]: 3 Finančne informacije DDV: Navedena cena je brez DDV DDV/Obdavčitev razlike: DDV je odbitna za podjetja Hedpfx Aexixh Ajh Defn Dostava in prevzem so možni kadarkoli za vse iz industrijskega sektorja Yorick Diebels