Balirne stiskalnice nakup rabljenega (186)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 15 t, širina bale: 700 mm, višina bale: 700 mm, teža bale: 220 kg, vhodna napetost: 400 V, moč: 4 kW (5,44 KM), lastna masa: 2.700 kg, Manufacturer: Borg Baling Company Duedpoh Dy Rfsfx Ai Ueu Model: S-15KK Year of manufacture: 2002 3x400V, 4kW, 14.5A Pressing force: 15 t Net weight: 2.7 t Max. bale dimensions: 700 x 700 x 1000 mm Wide selection of used machinery and industrial equipment

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Dusdpeic Rl Dofx Ai Ueu Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 2 t, dolžina bale: 1.200 mm, širina bale: 500 mm, višina bale: 400 mm, teža bale: 100 kg, skupna masa: 1.820 kg, To je popolnoma avtomatski stroj za baliranje, ki bale poveže z dvema jeklenima žicama (premera 2,2 mm). Ventilator vpihuje odpadni papir v stroj skozi posebne cevi s premerom 100 mm. Ventilator in približno 10 metrov dolga cev sta vključena v ceno. Stroj je v delujočem stanju in ga je mogoče preizkusiti. Prodaja se zaradi neuporabe; idealen za baliranje odpadnega papirja iz tiskarn in higienskih izdelkov. Duedpfx Aijy Ic Rus Ueu

Stanje: rabljeno, Leto izdelave: 2005, Chambre à presse - Presse à balles Austropressen APV 300, occasion 🧰 Caractéristiques du produit • Fabricant : Austropressen • Modèle : APV 300 • État : Occasion, voir photos • Couleur : turquoise • Année de fabrication : 2005 • Dimensions : env. 1620 x 1260 x 2920 mm • Poids net : 1650 kg • Force de pression : 300 kN • Temps de cycle : 45 secondes • Puissance : 5,5 kW • Tension : 400 V (12,5 A) • Poids des balles : 300 - 400 kg 💰 Prix : 7 200 € HT, hors TVA Duedpexvy N Uofx Ai Ueu • Remise sur quantité : sur demande • Frais de port : Europe entière sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : possibles à tout moment sur rendez-vous Plus de 5 000 mètres linéaires de rayonnages à palettes de divers fabricants en stock en permanence. (Sous réserve de modifications et d’erreurs dans les données techniques, les informations et les prix, ainsi que de vente intermédiaire ! Voir nos CGV. Tous les prix s’entendent hors TVA départ stock.)

Stanje: rabljeno, Leto izdelave: 2019, Presse à chambre – Presse à balles – Presse pour matières premières Bramidan X30 AD, occasion 🧰 Caractéristiques du produit Dodpfx Aoxvyn Dei Ujuu • Fabricant : Bramidan • Modèle : X30 AD • État : d’occasion, voir photos • Couleur : orange • Année de fabrication : 2019 • Dimensions : env. 1760 x 1255 x 2295 mm • Poids propre : 1650 kg • Force de compression : 300 kN • Temps de cycle : 25 secondes • Puissance : 4 kW • Tension : 3 x 230 - 440 V / 50/60 Hz • Niveau sonore : 59 – 60 dB • Poids des balles : plastique jusqu’à 425 kg, carton jusqu’à 350 kg 💰 Prix : 8 900 € net hors TVA. • Remise sur quantité : sur demande • Frais de port : Europe entière sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : à tout moment sur rendez-vous Plus de 5 000 mètres linéaires de rayonnages à palettes de nombreux fabricants en stock en permanence (Sous réserve de modifications et d’erreurs dans les données techniques, informations et prix ainsi que de vente intermédiaire ! Voir nos CGV, tous les prix s’entendent hors TVA départ stock.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Horizontalna balirna stiskalnica HSM HL 7009 Re/Li. Stroj je v zelo dobrem stanju in ga redno vzdržuje pooblaščen servisni center. Duodpfezck Uijx Ai Uou Ta balirna stiskalnica je zasnovana za večje projekte odstranjevanja odpadkov v maloprodaji ter v manjših in srednje velikih centralnih skladiščih. Stiski modela HL 7009 imajo prečni prerez 1100 x 1100 mm in lahko pri dolžini baleta 1200 mm tehtajo do 600 kg. To zagotavlja optimalno izkoriščenost nosilnosti tovornjaka. Pritisna sila: 700 kN Specifična pritisna sila: 58 N/cm² Pogonska moč: 10,5 kW Napetost / frekvenca: 400 V / 50 Hz Nazivna prostorninska zmogljivost (teoretično): 42,97 m³/h Odprtina za polnjenje – širina x dolžina: 890 x 1020 mm Dimenzije baleta – širina x višina x dolžina: 1100 x 1100 x 1200 mm Skupne dimenzije – dolžina x širina x višina: 5366 x 2525 x 2559 mm Teža baleta: 600 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 750 mm, višina bale: 1.100 mm, teža bale: 550 kg, Oprema: dokumentacija / priročnik, Automatic baler HSM VK 4812 The machine is in perfect condition. It has only 1,950 operating hours and has processed just 1,314 bales of material. The baler has been regularly serviced and has operated indoors since new. It has worked with very low-contaminant material—mainly textile offcuts. Key advantages of the machine: - Actual throughput: 6–13 t/h - Optimal continuous operation: 6–10 t/h - Very fast cycle → ideal for integration with conveyor lines - Significantly better performance than the 15–22 kW version with high material flow Technical data: Pressing force: 480 kN (approx. 48 tons) Motor power: 30 kW Connection load: approx. 32 kW Power supply: 3 × 400 V / 50 Hz Specific pressure: 58.2 N/cm² Volume throughput: up to 332 m³/h Weight throughput (practical): approx. 6 t/h (20 kg/m³) approx. 13 t/h (50 kg/m³) Dedpezb H E Uefx Ai Usuu Theoretical max. throughput: up to 16.6 t/h at 50 kg/m³ Idle cycle time: approx. 11.2 s Bale dimensions: 1100 × 750 × 600–1200 mm Bale weight: up to approx. 550 kg Press channel: 1100 × 750 mm Feed opening: approx. 1020 × 1250 mm We also have other balers in stock. Transportation costs depend on weight, volume and, most importantly, distance. For inquiries, please provide the following information: delivery address (postal code and city). Further details require a phone call, so please inquire by phone about transportation costs and alternative delivery methods. Our contact details can be found in the seller’s legal information. We sell and export worldwide. Thanks to our large warehouse capacity, we can also supply larger quantities flexibly and quickly. We issue intra-Community invoices – VAT-exempt. Opening hours: Mon-Fri: 8:00–16:00 Sat: closed

Stanje: zelo dobro (rabljeno), Baling Press HSM HL 4809 - Large filling opening, ideal for bulky boxes - Container tipper for convenient loading Pressing force in kN: 480 - Motor power in kW: 10.7 - Voltage/Frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 Dujdpfsv Ak Npsx Ai Ueu - Machine dimensions length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4-fold with wire Year of manufacture: 2015-2017 Baler complete, side covers removed for transport Balers inspected by authorized service

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, Oprema: dokumentacija / priročnik, Used vertical baler HSM V-Press 1160 Plus, manufactured in 2015. The machine is regularly serviced by an authorized service center. The baler is fully operational and in very good technical condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Bale material: film, mixed paper, cardboard, cutting waste Dsdpfx Aijzbrxge Usuu Freight costs depend on weight, volume, and especially the distance. For inquiries, the following information is relevant: delivery address (postal code and town name). Further details require a phone call, so please contact us by phone to discuss transport costs and delivery modalities. Our contact details are found in the legal information of the seller. Payment in cash upon collection on site is possible. We sell and export worldwide. Thanks to our large storage capacity, we can also supply larger quantities flexibly and quickly. Please contact us before purchase. We issue intra-community invoices (VAT excluded). Business hours: Mon-Fri: 8:00 – 16:00 Sat: closed

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Oprema: dokumentacija / priročnik, HSM HL 4010 Re / Li horizontalna balirna preša. Opremljena s prekucnikom za košaro. Letnik proizvodnje: 2015. Zelo dobro ohranjena – redno vzdrževana v pooblaščenem servisnem centru. Pripravljena za uporabo. Možna vezava z žico, vrvico ali polipropilenskim trakom. Polavtomatski balirni prešni sistem s 40-tonskim pritiskom za učinkovito zmanjšanje prostornine ostankov (reciklažnih materialov) v industriji in trgovini: Karton Tetrapak Folije Pene PET plastenke Izolacijske podloge in drugi stisljivi materiali. Dodpfx Aiozaqlco Usuu Tlačna sila: 400 kN Transportna širina: 1,767 m Transportna višina: 2,489 m Transportna dolžina: 5,573 m Teža: 4.500 kg Moč pogona: 7,5 kW Teža bala (odvisno od materiala): 300–350 kg Dimenzije bale d x š x v: 750 x 1200 x 750

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Bale Press, Bramidan B20 – used: Price ex location: €7,750 (net) Manufacturer: Bramidan Model: Vertical Material Baler B20 Year of manufacture: 2018 Bale weight Cardboard (kg): 200-250 Plastic film (kg): 250-300 Pressing force: 20 t Bale size WxDxH (mm): 1200 x 800 x 800 Filling opening WxH (mm): 1200 x 480 Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Average cycle time (s): 36 / 21 Dimensions WxDxH (mm): 1775 x 1030 x 2790 Transport height: 2.58 m Weight (kg): 1250 Stroke (mm): 750 Number of ties: 4 Type of tying: Strap Easy bale removal: Yes Automatic bale ejector The classic among material balers The B20 is versatile and used everywhere. Recyclables must be "dry & soft". Particularly well-suited for materials such as cardboard, paper, packaging (PPK), and film. Duodpsrl I Ivofx Ai Uju Stackable bales, up to 900 kg per pallet Bales can be stacked 2 or 3 high on one pallet; enormous space savings. Easy bale strapping Automatic bale ejection Short cycle time thanks to high-speed operation Front-mounted strap rolls allow installation directly against the wall Pallet-sized bales can be stored outdoors under cover 3xx230x-440 4 kW Amperes: 25/16 dB: 62-64 Condition: good – very good Available: immediately Location: 09116 Chemnitz

Stanje: dober (rabljeno), Leto izdelave: 1990, Valjčni stiskalnik, Bergmann – rabljeno - : Cena iz lokacije: samo 950 € (neto) Proizvajalec: Bergmann Tip: PS 8100E Leto izdelave: 1990 Serijska številka: 05 3658 2845/90 Pritisna moč: t Lastna teža: 750 kg 400V, 5,5 kW, Duodpfozbygrox Ai Uju Stanje: dobro Na voljo: od Q4/2026 Lokacija: Hamburg Učinkovito stiskanje odpadkov: Poseben jekleni boben omogoča učinkovito zbiranje, drobljenje in stiskanje odpadkov ter zmanjšuje njihov volumen do devetkrat. Neprekinjeno polnjenje: Stroj omogoča neprekinjeno polnjenje s strani vseh uporabnikov. Nalivni jašek je mogoče pustiti odprt tudi med delovanjem, kar olajša in pospeši stiskanje smeti.

Stanje: dober (rabljeno), Leto izdelave: 1999, Balinirke, HSM, stiskalna moč 30 t – rabljeno - : Cena na lokaciji: samo 2.950 € (neto) Proizvajalec: HSM Tip: 225.1 VL Leto izdelave: 1999 Številka stroja: 6124.834. N Serijska številka: 200014505 Stiskalna moč: 30 t 400V, 5,5kW Stanje: dobro Dedpfx Aszbygfsi Ujuu Na voljo: od Q4/2026 Lokacija: Hamburg

Leto izdelave: 1982, stanje: dober (rabljeno), številka stroja/vozila: 14320, baling press / paper baler Dujdeiuky Iopfx Ai Uju

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, kapaciteta rezervoarja za olje: 400 l, moč: 15 kW (20,39 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 108 m³/h, Technical data – Baler: Manufacturer as per nameplate: BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 units Press force: 50 t Specific press force: 650 kN/m² Feed hopper dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/h Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: 30 kg/m³: approx. 3.1 t/h 60 kg/m³: approx. 4.5 t/h 100 kg/m³: approx. 7.2 t/h Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 L PLC control: Siemens S7-200 Effective transport dimensions (excluding chute): 6850 x 1950 x 2650 mm (L x W x H) Dujdpfozbxyqox Ai Uou Transport weight (baler): 8.5 t Condition of the baler: The baler was previously used exclusively in a production environment for baling cardboard and has been regularly serviced. With only 13,209 operating hours, the machine has seen comparatively low use. The baler has undergone partial refurbishment and final testing in our workshop. The following refurbishment work was performed: - Machine cleaned - Bale retainer freed and lubricated - Photoelectric sensor renewed - Twisting unit completely disassembled, all bearings and plastic guides replaced, lubricated, and chain tension adjusted - Knives and counter-knives removed, sharpened, and reinstalled - Knife gap re-adjusted - General maintenance work carried out and grease points serviced Scope of delivery: - 1 baler with wire roll boxes, without wire (6850 x 1950 x 2650 mm) - 1 bale chute (5100 x 1150 x 450 mm) - 1 wire roll box for floor mounting (1450 x 380 x 360 mm) A tautliner (curtain side truck) with an effective internal height of 2700 mm is required for transport of the baler. Remarks: Full documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is included. Inspection by appointment possible. We accept no liability for technical data or for possible errors or omissions.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, kapaciteta rezervoarja za olje: 600 l, moč: 22 kW (29,91 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 530 m³/h, For sale is a partially refurbished Presona baler with 50 t pressing force and 22 kW drive power, year of manufacture 2005. Technical Data – Baler: Manufacturer: Presona AB Type: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hrs (as of April) Number of bales pressed: 198,059 (as of April) Main press force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale size: 1,100 x 720 mm, variable length Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput at bulk density of: 30 kg/m³: 6–7 t/hour 50 kg/m³: 7–9 t/hour 100 kg/m³: 11–14 t/hour Bale density (paper/newspapers): 400–550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions without press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press): approx. 16 t Condition of the baler: The machine has been partially refurbished in our workshop, and general maintenance was performed. After completion of the overhaul, the baler was tested under operating conditions and is available for sale at short notice. The following overhaul work was carried out: General work: - Machine cleaned, derusted, primed, partially repainted - Wire run marks in the press channel passages welded and smoothed Hydraulic unit: - Hydraulic oil tank completely drained, tank cleaned, refilled with new oil - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - English language uploaded in control menu - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for flap replaced - Wiring of the wirbulator overhauled, connected and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled; cylinder tube honed, full seal kit replaced, leak test performed - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled; both cylinder tubes honed, full seal kits replaced, leak test performed Dedezbxxaspfx Ai Uouu - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire deflection rollers replaced - Needles adjusted and set - All wire guide rollers in needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the Drillomat, under the twister fingers, replaced Scope of delivery: Only the baler is being sold. The documentation (manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. No liability is accepted for technical details or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, For sale is a complete Bollegraaf baling line consisting of conveyor technology, baler, and wire stations. Technical data - Baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Duedpfezbxw Ajx Ai Uju Tying: 5-fold vertical Throughput performance with bulk density: – 30 kg/m³: approx. 5.5 t/h – 50 kg/m³: approx. 10 t/h – 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with Wirbulator 1 maintenance platform with access ladder 2 wire stations with diverting pulleys for 10 wire spool stands (wire not included) The following repair and maintenance works were carried out: – Hydraulic oil tank fully drained, cleaned, and refilled with new oil – Oil filter and air filter replaced – Some hydraulic block seals renewed – Hydraulic hose at hydraulic block replaced – Wire guides at base passages welded and smoothed – Tying system cleaned and serviced – Electrical system refurbished, some door interlock switches replaced – Wirbulator repaired – General maintenance carried out, greased – Machine tested in ongoing operation, without material, in manual and automatic modes (see function video) Remarks: The system has been completely dismantled, stored, and is ready for immediate loading. Documentation (manual, CE, electrical/hydraulic schematic) is available. Inspection possible by appointment. We accept no liability for technical details or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.000 kg, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, volumenski pretok: 795 m³/h, Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours, as of December 2025 Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Duedozbxwiopfx Ai Ueu Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (baler): approx. 50.8 t Scope of delivery: 1 unit MACPRESSE baler, type 111A 1 set Operating manual with CE Declaration of Conformity, electrical and hydraulic schematic Notes: The machine has been serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Hydraulic oil tank drained and cleaned • Oil and air filters replaced • Filled with new hydraulic oil • All hydraulic hoses replaced • Dismantling of press ram, complete disassembly, mechanical parts freed and serviced • Front two main running rollers replaced • Blades on press ram replaced • Main hydraulic cylinder disassembled and inspected, cylinder tube and piston rod checked, complete seal kit replaced • Counter blade in frame replaced • Blade gap set to approx. 3 mm • Upper steel guide rails in frame (left and right) replaced • Worn press floor cut out, base plate replaced with wear-resistant HARDOX steel • Tying and twisting unit dismantled and serviced, all twisting shafts and ball bearings replaced • All wire rolls in needle heads replaced • Wire cutters cleaned and adjusted, chains lubricated and tensioned • All wire guide rollers serviced • All door limit switches replaced • Air separator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was subjected to a machine test in manual and automatic mode. See video for machine function test. The documentation (Operating manual, CE, electrical/hydraulic diagrams) is complete. Inspection by appointment is possible. We assume no liability for the technical information or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 450 kg, Oprema: dokumentacija / priročnik, HSM VK 4812 P Year of manufacture: 2017 Fully automatic baler. The machine has undergone service and maintenance performed by an authorized HSM Service Center with a location in Germany. Baling operation after extensive servicing – further details available upon direct contact. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 – 1200 mm Total length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Pressed materials: film, mixed paper, cardboard, punching waste Bale tying: 4-fold with wire We also have other balers in stock. Dedpjy Udzhsfx Ai Ujuu Transport costs depend on weight, volume, and especially distance. For inquiries, the following information is essential: delivery address (postal code and locality). For further details, telephone contact is required; therefore, please call us to inquire about shipping costs and other delivery options. Our contact details can be found in the seller’s legal notice. We sell and export worldwide, and due to our large warehouse capacity, we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices – without VAT. Opening hours Mon-Fri: 8:00 a.m. – 4:00 p.m. Sat: closed

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, teža bale: 600 kg, Oprema: dokumentacija / priročnik, DIXI 80 SLD Horizontalna stiskalnica Polavtomatski stiskalni sistem z 80-tonsko stiskalno silo za ekonomično zmanjšanje volumna ostankov (reciklabilnih) v industriji in trgovini: Duodpfx Ajy Udwpei Uou Karton Tetrapaki Folie Pena PET steklenice Izolacijske preproge in drugi stisljivi materiali. Stiskalna sila: 80 t Električni priključek: 400 V, 50 Hz; 11 kW; D-32 A (opcijsko: K-32 A) Cikel – povprečno pribl.: 35 sek. Dolžina pribl.: 4.320 mm (brez dvižne naprave in palete) Širina pribl.: 1.830 mm Višina pribl.: 2.620 mm (s lijakom) Vhodna odprtina (ŠxG) – ohišje: 1.040 x 1.110 mm Dimenzije bale: 1.120 x 1.120 x 1.200 mm Teža bale pribl.: 500 – 600 kg Povezava: 4-krat ročno, žica s hitrimi zapirali Teža stroja pribl.: 8.000 kg (brez bale)

Stanje: pripravljen za uporabo (rabljen), Sila stiskanja: cca 700 kN (cca 70 ton) Moč motorja: cca 11 kW Napajanje: 3 × 400 V / 50 Hz Teža posamezne bale: do cca 600 kg Dimenzije bale: cca 1100 × 1100 × 1200 mm Dimenzije stroja: cca 5,9 m dolžina, 2,5 m širina, cca 2,6 m višina Teža stroja: cca 7 ton Dsdpfx Aijra Dddo Ujuu Cikel: cca 45–47 s Konstrukcijske značilnosti: - velik polnilni odprtina za karton - možnost avtomatskega nalaganja (npr. s transportnim trakom) - ročno vezanje z žico (4 žice) - hidravlična blokada palete in vrat za odstranitev bale Prednosti te preše: - velike bale = manj prevozov - visoka sila stiskanja - prilagojena za neprekinjeno delo Na voljo letniki: 2018–2020

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Dodpfsu Thh Ejx Ai Uouu Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Dujdpjvf E Avsfx Ai Uju Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: pripravljen za uporabo (rabljen), Year of manufacture: 1993 380V, 35A incl. circuit diagram 3,300 x 2,200 x 2,600 mm (LxWxH) Hopper: Dujdpfxsu Hz Sto Ai Uju 3,000 x 2,000 x 2,000 mm (LxWxH)

Stanje: rabljeno, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable regenerative raw materials, secondary raw materials Serial No. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Platen stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber footprint: 1500 x 1100 mm Press chamber height: 1650 mm Filling opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale size: 1500 x 1100 mm Maximum bale height: 1100 mm Hydraulic operating pressure: 200 bar Motor power: 5.5 kW Connection: 400 V, 50 Hz, 12 A - Equipped with two hydraulic cylinders - Door locking by threaded spindle with handwheel - Pressing operation only possible with closed chamber door - Two-hand operation for hydraulic ejection of finished bale - Clearances for manual strapping - Produces standard industrial bales of 1500 x 1100 x 1100 mm - The highly compressed bale is automatically tipped onto a pallet - Only 62 operating hours Duodpfovq Rtksx Ai Uou Required space (L x W x H): 2120 x 1350 x 3220 mm Transport height with lowered hydraulic cylinders: approx. 260 cm Weight: 1.8 tons The machine is in very good, as-new condition. The new price for this press at BEMA is EUR 22,200 net. The company BEMA also purchases packaging waste that you bale using this press.