Balirne stiskalnice nakup rabljenega (188)

Stanje: dober (rabljeno), Leto izdelave: 1992, Valjčni kompresor, pakirna postaja, smetarski stiskalni zabojnik, stiskalnica za odpadke, zabojnik za stiskanje, zabojnik za odpadke, samo-stiskalni zabojnik, stiskalnica za odpadke, zabojnik za papir s stiskalnico, zabojnik za papir, omarna stiskalnica, vertikalna balirna stiskalnica, drobilnik kartona, stiskalnica bal papirja, rotacijski kompresor odpadkov -Proizvajalec: Bergmann, stiskalnica bal papirja -Tip: PS 8100-38 Hnedpfxjxrpi Aj Adkei -Stiskalec odpadkov: z rotacijsko stiskalno enoto -Prednost: Možno neprekinjeno polnjenje -Pogon: 2,02 kW -Otvor za polnjenje: 1190/990/H670 mm -Volumen bala: 1 m³ -Transportne mere: 1600/1200/H2200 mm -Teža: 898 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: Hedpfsx A U Ncex Adkeni • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: rabljeno, Leto izdelave: 2005, Chambre à presse - Presse à balles Austropressen APV 300, occasion 🧰 Caractéristiques du produit • Fabricant : Austropressen • Modèle : APV 300 • État : Occasion, voir photos • Couleur : turquoise • Année de fabrication : 2005 • Dimensions : env. 1620 x 1260 x 2920 mm • Poids net : 1650 kg • Force de pression : 300 kN • Temps de cycle : 45 secondes • Puissance : 5,5 kW • Tension : 400 V (12,5 A) Hnedoxvy N Uopfx Adkei • Poids des balles : 300 - 400 kg 💰 Prix : 7 200 € HT, hors TVA • Remise sur quantité : sur demande • Frais de port : Europe entière sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : possibles à tout moment sur rendez-vous Plus de 5 000 mètres linéaires de rayonnages à palettes de divers fabricants en stock en permanence. (Sous réserve de modifications et d’erreurs dans les données techniques, les informations et les prix, ainsi que de vente intermédiaire ! Voir nos CGV. Tous les prix s’entendent hors TVA départ stock.)

Stanje: rabljeno, Leto izdelave: 2019, Presse à chambre – Presse à balles – Presse pour matières premières Bramidan X30 AD, occasion 🧰 Caractéristiques du produit • Fabricant : Bramidan • Modèle : X30 AD • État : d’occasion, voir photos Hjdpfexvyn Djx Adkeni • Couleur : orange • Année de fabrication : 2019 • Dimensions : env. 1760 x 1255 x 2295 mm • Poids propre : 1650 kg • Force de compression : 300 kN • Temps de cycle : 25 secondes • Puissance : 4 kW • Tension : 3 x 230 - 440 V / 50/60 Hz • Niveau sonore : 59 – 60 dB • Poids des balles : plastique jusqu’à 425 kg, carton jusqu’à 350 kg 💰 Prix : 8 900 € net hors TVA. • Remise sur quantité : sur demande • Frais de port : Europe entière sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : à tout moment sur rendez-vous Plus de 5 000 mètres linéaires de rayonnages à palettes de nombreux fabricants en stock en permanence (Sous réserve de modifications et d’erreurs dans les données techniques, informations et prix ainsi que de vente intermédiaire ! Voir nos CGV, tous les prix s’entendent hors TVA départ stock.)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Hnodevtpq Hjpfx Adkoi Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours (as of August 2025) Pressing Force, Main Press: 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Motor Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Rates: - Bulk density 20 kg/m³: up to 6 t/hour, depending on material - Bulk density 50 kg/m³: up to 13 t/hour, depending on material Bale Weight: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Control Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Dimensions with Bale Chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire reel boxes for 8 pieces of 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right side and can be folded down to the rear for transport. The baler has been partially overhauled and tested in our workshop—see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment possible. We assume no liability for technical specifications or potential errors.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Pressing force 548 kN The size of the feed opening is 1,195 x 650 mm Bale weight depending on material up to 480 kg Tying with 4 x strapping tape or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Hnedpfx Aettaytodkei Dimensions 1,797 x 1,062 x 2,985 mm The equipment weight is 2,030 kg

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Pressing force: 548 kN Loading chamber dimensions: 1,195 x 650 mm Bale weight depending on material: up to 480 kg Hnedpfx Asttal Asdksi Tying: 4-fold strapping or 4-fold wire Bale dimensions: 1,200 x 780 x max. 1,200 mm Machine dimensions: 1,797 x 1,062 x 2,985 mm Equipment weight: 2,030 kg

Stanje: dober (rabljeno), Leto izdelave: 2013, Pressing force: 548 kN Hnjdpfettav Nox Adkji Loading opening dimensions: 1,195 x 650 mm Bale weight depending on material: up to 480 kg Tying with 4x strapping bands or 4x wires Bale size: 1,200 x 780 x max. 1,200 mm Dimensions: 1,797 x 1,062 x 2,985 mm Equipment weight: 2,030 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450 is the ideal baler for compacting your loose cardboard and film waste into bales of up to 450 kg. The baler impresses with its simple and safe operation as well as its large feed opening, making it optimal for high material volumes. By compacting these waste/recyclable materials, you achieve volume reductions of up to 90%, significantly cut your disposal costs, and ensure proper return of materials into the recycling stream. Pressing Force: 30 tons Bale Weight: up to 450 kg (depending on material) Bale Size: 1000 H (variable) x 1200 W x 800 D mm Machine Dimensions: 3000 H x 1781 W x 1196 D mm Machine Weight: 1300 kg Transport Height: 2300 mm Feed Opening: 1200 W x 680 H mm Press Cycle Time: 40 seconds Motor: 5.5 kW, 16 Amp Power Supply: 380 - 400 V (3-phase) Noise Level: 68 dB Dual-cylinder system for uniform material compaction User-friendly lever control Bale ejector for easy bale removal Retention claws to prevent material spring-back Holder for strapping bands A quality product "Made in Europe" Hnjdpfevamafsx Adkei Suitable for compacting: Cardboard Films Big Bags Textiles Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine painted in RAL color of choice PLC control with automatic cycle, bale-ready indicator, and key-operated emergency stop Vertical door Strapping bands 11 kW / 32 Amp motor Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, waste compactor, recyclables press, waste press, residual waste compactor

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Bale press BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 75 kg. With a suitable pressing insert, it is also suitable for compressing individual metal and plastic containers, as well as cans. The bale press impresses with its easy and safe operation alongside its large loading aperture. By compacting these waste/recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs and ensure material is properly returned to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Filling opening: 700 W x 698 H mm Pressing time: 24 seconds Motor: 1.5 kW 13 amp Power supply: 230 V (single phase) Noise level: 68 dB User-friendly lever operation Bale trolley for removal of bales Retention claws to reduce spring-back of material Holding device for strapping bands Quality product “Made in Europe” Suitable for compacting: Cardboard Film Cans and light metal containers Hodpjvah S Aofx Adkjni Canisters and light plastic containers Clothing Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Can-crusher insert PLC control system with automatic press cycle, bale ready indicator, and key-operated emergency stop Bale ejector with strap + PLC (instead of bale trolley) Strapping bands Power supply 380–400 V (3-phase) Bale press, paper press, waste paper press, cardboard press, cardboard baler, film baler, paper bale press, waste bale press, waste press, recyclable press, waste compactor, bin press, residual waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF60HD Special Baler is ideal for compacting your challenging and tough materials such as cans, PET, metal pails, and other tin containers. It can also reduce plastics to a minimum. This special baler stands out for its easy operation and large feed volume. The finished bales can be easily removed using the automatic bale ejector. By compacting these waste and recyclables, you achieve up to 90% volume reduction, significantly lower your disposal costs, and return the material properly into the recycling loop. Pressing force: 13 tons Bale weight: 25 – 60 kg (depending on material) Bale size: 650 H (variable) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Feed opening: 600 W x 400 H mm Pressing cycle time: 25 seconds Motor: 2.2 kW 16 amp Power supply: 230 V (single phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy bale removal Hodpovbq Rksfx Adkjni Retainer system to minimize material spring-back Cross-tying for secure bale integrity Holding device for strapping bands A quality product “Made in Europe” Suitable for compacting: PET bottles Cans and tin containers Canisters and plastic containers Cardboard and film Additional options: Annual maintenance with safety (UVV) inspection Machine color according to RAL Strapping bands Power supply 380 - 400 V (3 phase) PET baler, PET bottle baler, can baler, can compactor, special baler

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Vertical Baler is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing bulky items like used tires and car bumpers to a minimum volume. The baler stands out for its user-friendly and safe operation, as well as its large feed opening, making it perfectly suited for medium to high material volumes. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and efficiently return the material to the recycling process. Technical Specifications: Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Pressing cycle: 40 seconds Motor: 5.5 kW, 16 Amps Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Key Features: - Extra-long twin cylinders for consistent and early compaction - User-friendly lever control - Bale ejector for easy bale removal - Additional retainer to minimize material spring-back - Holder for 4 rolls of strapping band - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and metal containers - Plastic canisters and packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Optional Features: - Annual maintenance including safety inspection (UVV) - Machine color according to RAL Hnsdjvug Ekjpfx Adkji - PLC control with automatic press cycle, bale-ready indicator, and key-operated emergency stop - Vertical door - Strapping bands/wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baler. Used as: can baler, can press, PET baler, PET press, tire baler, tire press, waste baler, cardboard baler, film baler, paper baler, refuse baler, recycling press, waste compactor, general waste baler.

Stanje: novo, Leto izdelave: 2026, The BTS film compactor is the solution to keep bothersome and bulky packaging film under control. With its space-saving footprint and stable design, you can effortlessly reduce all film waste to a minimum of its original volume. The retention ring in the film compactor prevents unwanted expansion, ensuring that the film stays exactly where it belongs. The filled film sacks can then either be compressed into a bale using a baler or disposed of in a recycling container. By compacting these waste/recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return the material into the recycling cycle. Dimensions of film compactor: 1000 mm (H) x 450 mm (W) x 420 mm (D) Weight of film compactor: 5.5 kg Color of film compactor: RAL 9006 Silver Film sack volume: 240 ltr. Film sack fill weight: up to 15 kg • Easy collection of packaging films • Clean and safe workplaces • Retention ring prevents unwanted material expansion of the films • Optimum use of waste sacks • Reduces the frequency of waste collection and therefore disposal costs • A quality product “Made in Germany” Suitable for compacting: • Films • Foam films Hedpfxsvbrfco Adkeni Additional options: • BTS film sacks 240 ltr. • Film compactor available in any RAL color (for minimum order quantity of 40 units) • BTS baler for films Film compactor, compaction stand, film collector, film disposal

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales weighing up to 200 kg. Different materials can be collected in two or more adjoining press chambers, and once a chamber is full, the movable press head is simply rolled over it and the material is compacted. By compressing this waste/recyclable material, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Pressing force: 16 tonnes Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Filling opening: 1100 W x 800 H mm Press cycle time: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy bale removal Retention claws to minimise material spring-back Short handling times as a chamber is always available for loading Strapping band holder A quality product "Made in Europe" Suitable for compacting: Cardboard Foils Big bags Textiles Light recyclables Additional options: Annual maintenance including safety inspection (UVV) Machine colour to RAL specification PLC control with automatic press cycle, bale-ready indicator, and key-operated emergency stop Hnsdpfxeva Hups Adkei Additional press chambers (up to a total of 6) Strapping bands Power supply 380 - 400 V (3 phases) Double chamber baler, baler, paper baler, waste paper baler, carton baler, cardboard baler, film baler, paper bale press, waste baler, waste press, recycling press, waste compactor, rubbish press, residual waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF300LH is the ideal baler for compacting your loose cardboard and film waste into bales of up to 300 kg. Its compact design makes it especially suitable for locations with restricted ceiling height. The baler impresses with its simple and safe operation, as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and return the material properly to the recycling cycle. Pressing force: 20 tonnes Bale weight: up to 300 kg (depending on material) Bale size: 1100 H (var.) x 1200 W x 800 D mm Machine dimensions: 1986 H x 1800 W x 1100 D mm Machine weight: 1,140 kg Transport height: 1986 mm Feed opening: 1200 W x 600 H mm Pressing time: 45 seconds Motor: 2.2 kW, 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB PLC control with automatic pressing cycle, bale-ready display, and emergency stop with key Bale ejector strap for easy removal of bales Retaining claws to minimize material spring-back Low overall height, perfect for rooms with limited headroom Operating hours counter Strapping tape holder A quality product "Made in Europe" Suitable for compacting: Cardboard Film Hjdpfx Adeiwgcmskoni Big Bags Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine color to RAL Strapping tapes Power supply 380 - 400 V (3-phase) Baler, cardboard baler, used paper baler, carton baler, cardboard press, film baler, paper bale press, waste baler, waste press, recyclables press, waste compactor, refuse press, residual waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF75MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 75 kg. Various materials can be collected in two or more press chambers arranged side by side. Once a chamber is filled, the mobile press head is moved over it and the material is compacted. By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly feed the material back into the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 700 H (var.) x 700 W x 500 D mm Machine dimensions: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Hnedeva Hq Depfx Adkji Transport height: 2005 mm Filling opening: 700 W x 500 H mm Press cycle time: 35 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1-phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy bale removal Retainer to minimize material spring-back Short handling time as one chamber is always available for loading Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: - Cardboard - Films - Big Bags - Clothing - Light recyclables Additional options: - Annual maintenance with UVV safety inspection - Machine colour according to RAL - PLC control with automatic pressing cycle, bale-ready indicator, and emergency stop with key - Additional press chamber (up to 6 in total) - Strapping bands Double-chamber baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recycling press, waste compactor, refuse press, residual waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales of up to 500 kg. Its compact design makes it particularly suitable for areas with restricted ceiling heights. The baler impresses with its straightforward and safe operation, as well as its large feed opening. By compacting these waste/recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly reintegrate the material into the recycling stream. Pressing force: 50 tonnes Bale weight: up to 500 kg (depending on material) Bale size: 1100 H (variable) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2,100 kg Transport height: 2249 mm Feed opening: 1400 W x 680 H mm Press cycle time: 35 seconds Motor: 11 kW, 32 amp Power supply: 380 – 400 V (3-phase) Noise level: 68 dB PLC control with automatic press cycle, Bale-ready indicator and key-operated emergency stop Bale ejector system for easy bale removal Retention claws to minimize material spring-back Low overall height, perfect for areas with restricted headroom Operating hours counter Holder for 6 rolls of strapping material A quality product “Made in Europe” Hjdpfx Adeva Ekvoksni Suitable for compacting: Cardboard Plastic film Big bags Cans and PET bottles Light recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Strapping bands Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, recycling baler, refuse compactor, waste compactor, general waste press.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The BTS-MF250 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 250 kg. With an optional pressing insert, it is suitable for compressing small and large drums as well as other metal containers. The baler stands out due to its simple and safe operation and its large feed opening. By compacting this waste/recyclable material, you achieve up to 90% volume reduction, substantially cut your disposal costs, and properly return the material to the recycling loop. Pressing force: 15 tonnes Bale weight: up to 250 kg (depending on material) Bale dimensions: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 2900 H x 1759 W x 1185 D mm Machine weight: 985 kg Transport height: 2250 mm Feed opening: 1200 W x 680 H mm Pressing cycle: 34 seconds Motor: 2.2 kW, 16 amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retention claws to minimize material spring-back Holding device for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big bags Drums and metal containers Canisters and lightweight plastic containers Clothing Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV check) Machine color customization according to RAL Pressing insert for drums and other containers PLC control with automatic press cycle, bale-ready indicator, and emergency stop with key Vertical door Strapping bands Power supply 380 - 400 V (3 phase) Hsdpfjvalq Aox Adkeni Baler, cardboard baler, waste baler, paper baler, film baler, refuse baler, compactor, recycling press, waste compactor, general waste press.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The BTS-MF150 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 150 kg. The baler impresses with its simple and safe operation as well as its large feed opening, making it optimal for medium material volumes. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and return the material properly to the recycling stream. Pressing force: 8 tonnes Bale weight: up to 150 kg (depending on material) Bale size: 1000 H (var.) x 975 W x 800 D mm Machine dimensions: 2630 H x 1560 W x 1030 D mm Machine weight: 780 kg Transport height: 1955 mm Feed opening: 975 W x 470 H mm Pressing cycle: 40 seconds Motor: 2.2 kW, 16 amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for safe bale removal Retainer claws to minimise material spring-back Strapping band holder Hedpfx Asvalkqsdkjni A quality product "Made in Europe" Suitable for compacting: Cardboard Plastic film Big Bags Clothing Light recyclables Additional options: Annual maintenance with UVV safety inspection Machine colour according to RAL PLC control with automatic press cycle, bale-ready indicator and key-operated emergency stop Vertical door Strapping bands Power supply 380 - 400 V (3 phases) Baler, cardboard baler, waste paper baler, carton baler, cardboard press, film baler, waste baler, recycling press, waste compactor, refuse press, general waste baler

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Die BTS-MF100 ist die ideale Ballenpresse zur Verdichtung von losem Kartonagen- und Folienabfall zu einem Ballen von bis zu 100 kg. Sie ist mit einem automatischen Presszyklus, Betriebsstundenzähler und einem Bandauswurf-System ausgestattet. Die Ballenpresse überzeugt durch ihre einfache Bedienung, höchste Arbeitssicherheit sowie ihr großes Einfüllvolumen. Durch das Verpressen dieser wertvollen und recycelbaren Materialien erreichen Sie eine Volumenreduzierung von bis zu 90 %, sparen erheblich bei Ihren Entsorgungskosten und führen das Material dem Recyclingkreislauf korrekt wieder zu. Presskraft: 6 Tonnen Ballengewicht: bis zu 100 kg (materialabhängig) Hjdpfsvaimujx Adkjni Ballengröße: 850 H (variabel) x 980 B x 800 T mm Maschinenmaße: 2399 H x 1440 B x 1014 T mm Maschinengewicht: 632 kg Transporthöhe: 2399 / 1876 mm (auf Anfrage) Einfüllöffnung: 980 B x 480 H mm Taktzeit: 28 Sekunden Motor: 1,5 kW, 13 Ampere Stromversorgung: 220 - 240 V (1-phasig) Geräuschpegel: 68 dB Ausstattungsmerkmale: - Automatisches Bedienfeld mit Ballenvollanzeige und Not-Aus mit Schlüsselsperre - Betriebsstundenzähler - Bandauswurf für einfaches Entfernen der Ballen - Rückhaltekrallen gegen Rückfederung des Materials - Rollenhalter für 4 Umreifungsbänder - Qualitätsprodukt „Made in Europe“ Geeignet zur Verdichtung von: - Kartonagen - Kunststofffolien und -verpackungen - Textilien - Leichtwertstoffe Optionale Zusatzausstattungen: - Maschinenfarbe nach RAL - Umreifungsbänder - Stromversorgung 380 - 400 V (3-phasig) Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Wertstoffpresse, Müllverdichter, Müllpresse, Restmüllpresse

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF60 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 60 kg. With an additional press insert, it is even suitable for compressing individual metal and plastic containers, as well as cans. The baler impresses with its simple and safe operation, along with its large feed opening. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly cut your disposal costs, and properly return the material to the recycling cycle. Pressing force: 3.5 tonnes Bale weight: up to 60 kg (material-dependent) Bale dimensions: 800 H (variable) x 700 W x 500 D mm Machine dimensions: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Feed opening: 700 W x 492 H mm Pressing cycle: 24 seconds Motor: 1.5 kW, 13 amps Power supply: 220 – 240 V (single-phase) Noise level: 68 dB User-friendly lever operation Bale trolley for easy bale removal Retainer to reduce material spring-back Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Plastic film Cans and light metal containers Canisters and light plastic containers Textiles Light recyclables Additional options: Annual maintenance including safety inspection (UVV) Machine colour in RAL as per request Can/crush insert PLC control with automatic pressing cycle, bale-ready indicator, and emergency stop with key Hjdpfx Aozd Rkodkjni Strapping bands Power supply 380 – 400 V (three-phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste bale press, waste compactor, recycling press, garbage compactor, refuse baler

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF650 is the ideal bale press for compacting your loose cardboard and film waste into a bale weighing up to 650 kg. The baler impresses with its simple and safe operation and large feed opening, making it optimal for handling very high material volumes. By compacting this waste/recyclable material, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and efficiently return the material to the recycling loop. Pressing force: 50 tons Bale weight: up to 650 kg (material dependent) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine dimensions: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Feed opening: 1500 W x 770 H mm Pressing cycle: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 – 400 V (3 phase) Noise emission: 68 dB Double-cylinder design for consistent material compaction User-friendly lever operation Bale ejector for easy removal of finished bales Retaining claws to reduce material spring-back Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Film Hnodpfxobhxbte Adkji Big bags Clothing Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour according to RAL palette PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Vertical door Strapping bands 11 kW, 32 Amp motor Baler, paper baler, waste paper compactor, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, refuse press, recycling press, waste compactor, waste press, residual waste compactor

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS bag press is ideal for compacting your dry and wet waste directly into a garbage bag. It reliably and safely reduces the volume of bulky residual waste and recyclables to a minimum. The bag press impresses with its user-friendly operation and its outstanding volume reduction of up to 90%. By compacting these waste and recyclable materials, you can significantly reduce your disposal costs while also ensuring a safer and cleaner working environment. Pressing force: 3 tons Compaction: up to 90% (depending on material) Machine dimensions: 1861 H x 1200 W x 630 D mm Machine weight: 325 kg Transport height: 1861 mm Press cycle time: 20 seconds Motor: 1.5 kW, 13 Amp Electrical supply: 220 - 240 V (single phase) Noise level: 68 dB User-friendly lever operation Optimal use of garbage bags Reduces the number of refuse sacks required No need to climb into waste containers Decreases the frequency of waste collections A quality product "Made in Europe" Hedpfxebhu Iqo Adksni Suitable for compacting: Wet and dry residual waste Recyclable materials Paper and cardboard Lightweight recyclables Additional options: Annual maintenance with UVV safety inspection Machine color according to RAL Galvanized version Control system with automatic press cycle Power supply 380 - 400 V (three-phase) Refuse press, waste compactor, waste press, waste compactor, residual waste press, residual waste compactor, baling press, paper press, waste paper press, cardboard press, cardboard box press, film press, paper baler, waste baler, waste material press, valuable material press, waste compactor, refuse press, residual waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF550 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 550 kg. This baler stands out thanks to its easy and safe operation as well as its large feed opening, making it perfect for handling high material volumes. By compacting these waste and recyclable materials, you achieve up to 90% volume reduction, significantly reduce your disposal costs, and correctly reintegrate the material into the recycling loop. Pressing force: 50 tons Bale weight: up to 550 kg (depending on material) Bale size: 1200 (h, variable) x 1500 (w) x 800 (d) mm Machine dimensions: 3217 (h) x 2115 (w) x 1200 (d) mm Machine weight: 1650 kg Transport height: 2500 mm Feed opening: 1500 (w) x 770 (h) mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Double cylinders ensure uniform compaction of material User-friendly lever controls Bale ejector for easy bale removal Retention claws to reduce material spring-back Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big Bags Textiles Lightweight recyclables Additional options: Annual maintenance with accident prevention inspection (UVV) Machine painted in RAL colours PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Vertical door Strapping bands 11 kW motor, 32 Amp Hnedefgbtcjpfx Adkoi Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, waste compactor, recyclable press, refuse compactor, trash press, general waste baler.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2013, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2013 Hnjdpfx Adeur Ravokoi The equipment is incomplete and being sold as a parts unit Defects: Hydraulic pump missing Control unit missing Power supply missing