Bollegraaf HBC60A (30kW)

Bollegraaf HBC60A (30kW)

Stanje: pripravljen za uporabo (rabljen), Baler HSM VK 42/1200 fully automatic Gbedpfx Anjra Nrxjfsl Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Press length: approx. 7 meters Press weight: approx. 6,000 kg Tying: 4x automatic wire tying

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 2.400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R40410, moč: 371,43 kW (505,00 KM), lastna masa: 75.000 kg, rezalna sila: 900 t, Premična dizelska škarjasta stiskalnica COPEX model REFLEX 900 ton (leto 2023). Servis opravljen pri proizvajalcu. Zmogljivost: 10 do 22 t/h glede na vrsto odpadkov za rezanje. Na voljo takoj. Godpfxexg Ekfj Anfsbl

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. Gbjdpfx Astvat Tjnfjl The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Gbedpfx Aev T I Evsnfjl Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Avtomatska kanalna stiskalnica BOA Continu 25 LB + tračni transporter. Stiskalnica je v dobrem stanju, redno servisirana. Nedavno je bila opravljena popolna obnova Denison črpalke. Popolnoma delujoča in v stalni uporabi. Vabljeni k stiku z nami. Godpfx Answ S Tv Usfjbl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.900 h, številka stroja/vozila: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Throughput based on material bulk density: Gbodpfxeyrhi Nj Anfol * 30 kg/m³ = 7-9 t/h * 50 kg/m³ = 8-9 t/h * 100 kg/m³ = 11-14 t/h - Hopper length: 1500 mm - Hopper width: 1100 mm - Feed chamber volume: 2.7 m³ - Bale width: 1100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400-550 kg - Number of vertical tying wires: 5 pcs. - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Hydraulic tank capacity: 600 l - Motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: * Conveyor width: approx. 1300 mm * Length of horizontal section: 5,500 mm * Length of inclined section: approx. 10,800 mm * Conveyor weight: approx. 6 t Scope of delivery: - Baler, control cabinet, operator panel, conveyor belt for sale. The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Viewing available by appointment. We assume no liability for technical information or possible errors. Video material can be provided upon request.

Stanje: novo, Leto izdelave: 2025, Młyn turbo MTR-800 Młyn turbo przeznaczony jest do mielenia, wybijania oraz granulowania materiałów w celu poprawy jakości końcowej separacji w dalszych procesach recyklingu. Dane techniczne: - Moc zainstalowana – 75 kW - Szerokość komory – ok. 910 mm - Średnica komory – ok. 620 mm Gsdpfx Aev I S Ukjnfobl - Liczba noży ściernych – ok. 89 szt. - Liczba przeciwnoży ściernych – 18 szt. - Konstrukcja posadowiona na regulowanych izolatorach drgań - Wymiary – 2200 x 1600 x 1550 mm - Otwieranie komory za pomocą ręcznej pompy hydraulicznej - Podstawa silnika z napinaczem wahadłowym - Waga – ok. 1950 kg - Wylot zakończony króćcem fi-150 - Instalacja elektryczna z falownikiem w cenie.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Gsdpfx Ansviwdmofobl Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 24.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004283-0030, stiskalna sila: 122 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The unit concerns a Bollegraaf HBC120s baler (90kW), equipped with cross tying (5 vertical and 5 horizontal wires). At the time of writing, this baler is undergoing a complete overhaul at our refurbishment workshop. This refurbishment is carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S: Volume capacity m³/h max. – 815 660 500 Bulk density kg/m³ max. – 20 50 100 Weight capacity t/h max. – 16.3 33 50 The aforementioned capacities apply only if the machine is used properly and is fed continuously with suitable material for at least one uninterrupted hour. Bale weight – approx. 1,470 kg, depending on material type and bale length Bale length – variable / adjustable Gedpfsxcir Esx Anfobl Bale height – 1,100 mm Bale width – 1,100 mm Hopper dimensions – 1,100 mm x 1,600 mm – These dimensions also determine the maximum size of material that can be loaded into the machine. Press force – max. 119.7 tons Pre-press flap force – max. 65 tons Cycle time, excluding wire tying – 19 seconds Main motor output – 90 kW (120 HP) Twistomat (knotter) motor – 1.5 kW (SEW) Counter pressure pump motor – 1.1 kW (2 HP) Needle installation motor – 7.5 kW (SEW) Oil cooler fan – 3 kW (4 HP) Oil cooling pump – 4 kW (5.5 HP) Operating pressure – 315 bar Machine weight – approx. 40,040 kg Number of wires – 5 vertical; 5 horizontal Oil volume – 1,655 liters Oil type – BP-SHF-46 Colour – baler in RAL 6024 (green); safety doors in RAL 1021 (cadmium yellow) Baler dimensions – length 11,765 mm; width 2,500 mm; height 7,104 mm.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 6.000 h, številka stroja/vozila: 006424, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, trajanje garancije: 3 meseci, moč: 75 kW (101,97 KM), Oprema: dokumentacija / priročnik, This very young baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC100 baler (75kW) equipped with, among others, cross-tying and FULL HARDOX wear plating, as well as a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are fitted with all possible options to efficiently bale all types of plastics to the maximum extent. All equipment was built in 2022 and has very few operating hours. Gedpfjxvh Ewjx Anfobl The previous owner traded these machines in after purchasing a new Bollegraaf installation. After dismantling, this baler is offered including a 3-month warranty. Baler HBC100K (75kW): - Pressing blocks with 390mm height - Intermediate hopper - Conveyor inlet chute - Maintenance platform with cage ladder - Extra photocells - Frequency converter for the main motor for energy savings - APCP (adaptive self-learning channel pressure control for always optimal bale weights) - Cross-tying (3 horizontal wires and 5 vertical wires) - Full Hardox wear plating inside the baling chamber - Bale discharge - Hydraulic lifting mechanism for both knotter assemblies for improved accessibility/maintenance - Bale length display - Air conditioning on the control panel - Frequency converter for chain conveyor - Hydraulic oil heater - Cooler for hydraulic unit - 4G modem for remote support Bollegraaf Chain Conveyor HBT 1200/1800*20400: - Equipped with Bordoflex for additional chain protection - Discharge plate for debris - Support structures - Chain lubrication system