Stiskalnice za pločevinke nakup rabljenega (4)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, leto zadnje generalne obnove: 2025, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Feed opening chute: 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Processing capacity for empty beverage cans: - One press stroke: approx. 1.7 t/hour - Two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Fgodpfx Aszbxvlebtoc Transport weight of press: approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made from wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tinplate cans, sheet metal scrap, steel sheet, as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition – see functional video after refurbishment. During relocation of the machine, there was transport damage. The control cabinet was damaged and slightly dented by a forklift, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical details or possible errors.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS Drum Press auto is ideally suited for compacting steel drums from 30 to 220 liters, but can also easily compress plastic and cardboard drums. In many cases, the compressed recyclables can even be remarketed afterward. This drum press is especially notable for its reliable and easy operation. By compacting these waste or recyclable materials, you achieve a volume reduction of up to 90%, significantly lowering your disposal costs and returning the material properly into the recycling cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Fgjdpoc Spguefx Abtsc Compression ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB AUTO control with automatic press cycle 30-liter drip tray with drain valve Press ram with spikes for venting drums during the pressing process Maximum safety standards thanks to a fully enclosed housing Suitable for 30 to 220-liter steel tight-head drums, plastic drums, and cardboard drums A quality product “Made in Europe” Suitable for compacting: Steel drums Plastic drums Cardboard drums Fiber drums and paper drums Optional features: Annual maintenance with UVV inspection Machine color according to RAL Press insert for cans, oil and air filters

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS drum press is ideally suited for compacting 30 to 220 litre steel drums, but it can also compress plastic and cardboard drums effortlessly. In many cases, these compacted recyclable materials can even be remarketed. The drum press is particularly distinguished by its reliability and ease of operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the material to the recycling cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW, 32 amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever operation 30-litre drip tray with drain tap Platen with spikes for venting drums during compression Maximum safety standards thanks to fully encapsulated housing Suitable for 30 to 220 litre tight-head steel barrels, plastic drums and cardboard drums A quality product "Made in Europe" Suitable for compacting: Steel drums Plastic drums Cardboard drums Fibre drums and paper drums Additional options: Annual maintenance with safety inspection (UVV) Custom machine colour according to RAL AUTO control with automatic pressing cycle Press insert for cans, oil and air filters Fgjdpfszdr Tex Abtec Drum press for steel drums / plastic drums

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF60HD Special Baler is ideal for compacting challenging and tough materials such as cans, PET, metal buckets and other sheet metal containers. It also efficiently reduces plastics to a minimum volume. This specialist baler stands out for its ease of operation and large filling chamber. Finished bales can be effortlessly removed using the automatic bale ejector. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lowering your disposal costs and ensuring the material is efficiently returned to the recycling loop. Pressing force: 13 tonnes Bale weight: 25 – 60 kg (depending on material) Bale size: 650 H (var.) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Filling aperture: 600 W x 400 H mm Pressing cycle: 25 seconds Motor: 2.2 kW 16 amp Power supply: 220 – 240 V (single phase) Fodpfx Abjbhy Twjtjgc Noise level: 68 dB User-friendly lever control Bale ejector for easy removal Retaining claws to minimize material spring-back Cross strapping for secure bale integrity Holder for 7 rolls of strapping band A quality product “Made in Europe” Suitable for compacting: PET bottles Cans and metal containers Canisters and plastic containers Cardboard and foil Optional extras: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Strapping bands Power supply 380 – 400 V (3 phase) PET press, PET baler, can press, can baler, special baler, baler, paper press, waste paper press, cardboard baler, cardboard press, foil press, paper baler, waste baler, waste compactor, recyclable material press, refuse compactor, general waste press