Balirne stiskalnice nakup rabljenega (218)

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, moč: 40 kW (54,38 KM), Balirna stiskalnica iz leta 1995. Ogled po dogovoru. Hedpow H Ar Ajfx Ah Dofn

Stanje: dober (rabljeno), Welger Type: RC 660 Roll Compactor with Bridge Extraction Hodpedtxbiefx Ah Defn Compact and fully automatic Exclusively designed for the production of pressed bales from low-density packaging materials. Application Variants Materials to be processed Paper edge trims (strips and continuous) Paper and film bags PP film edge trims Film strips Garment protective film (PP/PE films) PP/PE fibre material Insulation and nonwoven materials Foam grids Packaging foam Tetra Pak cartons Dimensions: 2100 mm (L) x 940 mm (W) x 1755 mm (H) Feed hopper dimensions: 330 mm x 600 mm Max. bale size: 400 mm x 600 mm Bale weight: 20 – 30 kg depending on material Compaction density: 250 – 400 kg/m³ depending on material Throughput / daily output: 30 bales per day Feed rate: 0.36 m/s RC 660 3x 400V, 50Hz, 16A 2.2 kW, 5.0A Weight: 700 kg Bridge Extraction System Model: KFA Size: 60-30-3000 Airflow: 6,000 m³/h Motor power: 0.3 kW Filter area: 30 m² Vacuum: 3,100 Pa Condition: used Scope of delivery: (See photo) (Specifications and technical data may be subject to change and errors!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 1995, stiskalna sila: 85 t, moč: 170 kW (231,14 KM), BALIRNI STROJ PAAL KONTI 425 C Hodpfxsw Tawus Ah Defn Tehnični podatki: Proizvajalec: Paal Tip: Konti 425C Leto izdelave: 1995 Polnilna odprtina: 102 x 175 cm Pogon: 170 kW Stiskalna sila: 85 t Nastavitve: horizontalno, popolnoma avtomatsko Teža bale: 500-650 kg Teža stiskalnice: 25 t CENA PO POVPRAŠEVANJU!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Bale Press, Bramidan B20 – used: Price ex location: €7,750 (net) Manufacturer: Bramidan Model: Vertical Material Baler B20 Year of manufacture: 2018 Bale weight Cardboard (kg): 200-250 Plastic film (kg): 250-300 Pressing force: 20 t Bale size WxDxH (mm): 1200 x 800 x 800 Filling opening WxH (mm): 1200 x 480 Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Average cycle time (s): 36 / 21 Dimensions WxDxH (mm): 1775 x 1030 x 2790 Transport height: 2.58 m Weight (kg): 1250 Stroke (mm): 750 Number of ties: 4 Type of tying: Strap Easy bale removal: Yes Automatic bale ejector The classic among material balers The B20 is versatile and used everywhere. Recyclables must be "dry & soft". Particularly well-suited for materials such as cardboard, paper, packaging (PPK), and film. Stackable bales, up to 900 kg per pallet Bales can be stacked 2 or 3 high on one pallet; enormous space savings. Easy bale strapping Automatic bale ejection Short cycle time thanks to high-speed operation Front-mounted strap rolls allow installation directly against the wall Pallet-sized bales can be stored outdoors under cover Hedpfx Asrl I Ivsh Dsfn 3xx230x-440 4 kW Amperes: 25/16 dB: 62-64 Condition: good – very good Available: immediately Location: 09116 Chemnitz

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Hfjdpfevwlqqex Ah Dsn Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: pripravljen za uporabo (rabljen), HSM 155 VL Baler Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 200 – 250 kg (cardboard) Technical specifications: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressing force: 16 tons Power supply: 400 V (three-phase) Motor power: 4 kW Bale ejector HSM 155.1 VL Baler Pressing force: 18 tons Price for HSM 155.1 VL baler – 2,600 EUR HSM 155.2 VL Baler Hsdpfx Ahera Nrme Djfn Pressing force: 16 tons Price for HSM 155.2 VL baler – 2,800 EUR

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 62.058 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 099314, širina bale: 770 mm, višina bale: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum throughput: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm The baler is operational – it was in use until the production line was shut down. Recently, there was an issue with the automatic tying system. Hedjt Ucqfepfx Ah Dsfn

Stanje: rabljeno, Leto izdelave: 2002, stiskalna sila: 115 t, moč: 150 kW (203,94 KM), Naprodaj: horizontalna balirka Paal Konti 425 D Hfsdpow Tavksfx Ah Don Tehnične specifikacije: Proizvajalec: Paal Tip: Konti 425D Letnik izdelave: 2002 Vstopna odprtina: 102 x 200 cm Pogonska moč: 2 x 45, 2 x 75 kW Pritisk stiskanja: 115 t Nastavitve: Horizontalno, popolnoma avtomatsko Teža bale: 550-850 kg Teža pritiska: 36 t CENA NA POVPRAŠEVANJE!

Stanje: rabljeno, HSM V-Press 605 Waste Paper Baler – used The HSM baler is a compact machine designed to reduce packaging waste volume by up to 95%. Suitable for compressing and baling cardboard (paper bags, waste paper, offcuts) as well as film (stretch film, foil bags), it enables efficient waste disposal. The baler features a graphic text display indicating the machine’s operating status and a large feed opening for loading waste. These features enhance operating comfort and make the baler intuitive and easy to use. Advantages of the HSM V-Press 605 Baler: • Compact dimensions – saves valuable space on site. • Pressing force of 57 kN (approx. 6 tonnes) – produces bales up to 70 kg with dimensions of 80 x 60 x 60 cm. • Low noise levels – 60.1 dB(A). • Retaining claws – increase loading volume, thereby boosting baling efficiency. • Mechanical bale ejector – facilitates easy bale removal. • Large feed opening – increases operator convenience. • Quick and simple installation. Offer details – HSM V-Press 605 Paper Baler: • Product code: MTP004168 • Condition: used • Year of manufacture: 2018 • Model: V-Press 605 • Width: 119 cm • Depth: 81.5 cm • Height: 198 cm • Weight: 485 kg • Power: 1500 W • Voltage: 400 V Net price: €3,499 per unit * Large quantities available; price negotiable for bulk orders. * Delivery available across Europe. * Offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland. Hfsdpowcpvasfx Ah Don

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PVM 324212-1, stiskalna sila: 20 t, širina odprtine za polnjenje: 1.200 mm, dolžina polnilne odprtine: 480 mm, dolžina bale: 1.200 mm, širina bale: 800 mm, višina bale: 1.200 mm, teža bale: 250 kg, skupna širina: 1.030 mm, skupna višina: 2.790 mm, skupna dolžina: 1.775 mm, vhodna napetost: 400 V, vhodni tok: 16 A, skupna masa: 1.250 kg, trajanje garancije: 6 meseci, raven hrupa: 64 dB, moč: 4 kW (5,44 KM),

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, obratovalne ure: 28.748 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 570 kg, skupna masa: 20.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 37 kW (50,31 KM), volumenski pretok: 350 m³/h, Technical Data for Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of manufacture: 2015 Total operating hours: 30,143 hours (as of July 2025) Effective pump runtime: 6,527 hours (as of July 2025) Number of bales pressed: 115,193 (as of July 2025) Pre-press force: 25 t Main press force: 60 t Specific pressing force: 73 N/cm² Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Theoretical throughput: 800 m³/h Throughput under operating conditions: 350 m³/h Bale dimensions: 1,100 x 750 mm Drive power: 37 kW Binding: 5-fold vertical, fully automatic Throughput at bulk density of 50 kg/m³: 11 to 14 t/h Bale weights: 420 to 570 kg (material dependent) Hydraulic oil tank volume: 600 L Baler dimensions (assembled with hopper): 10,100 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine weight (baler): approx. 20 t Condition of the baler: The baler was partially overhauled in our workshop and subsequently tested in both manual and automatic modes. The following maintenance work was performed: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully emptied and cleaned - Oil and air filters replaced; new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers of the press ram removed and replaced - Grease cartridges of the automatic roller lubrication system replaced - Slide rails at the press floor in the pressing chamber cut out - Undercarriage reinforced with welded plates - New HARDOX slide rails welded in - Wire station with guide pulleys for lower wire cleaned and made operational - Slide rails on press channel floor cut out - New HARDOX slide rails welded in - Both side walls of the press channel removed and derusted - Worn side wall plates cut out - Complete side walls fitted with new wear plates and welded - Main hydraulic cylinder disassembled and inspected - Piston rod replaced, cylinder barrel honed - Complete seal kit renewed; pressure test performed - Vertical needle system for binding disassembled, cleaned, wire guide pulleys serviced - Chain cleaned and lubricated; chain tension reset - Drillomat cleaned; wire cutter, drill shafts and twisting fingers checked, retightened to specified torque and serviced - Machine inspected, general maintenance performed, and press tested in both manual and automatic modes Hfsdpfx Asvn Tg Ieh Dsn Notes: The baler is sold without conveyor belt and without wire stations. Inspection by arrangement possible. We assume no liability for technical data or any errors.

Stanje: zelo dobro (rabljeno), Baling Press HSM HL 4809 - Large filling opening, ideal for bulky boxes - Container tipper for convenient loading Pressing force in kN: 480 Hfedpfx Ahjv Ak Npo Dsn - Motor power in kW: 10.7 - Voltage/Frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Machine dimensions length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4-fold with wire Year of manufacture: 2015-2017 Baler complete, side covers removed for transport Balers inspected by authorized service

Stanje: pripravljen za uporabo (rabljen), Year of manufacture: 1993 380V, 35A incl. circuit diagram Hfsdeu Hz Stepfx Ah Djn 3,300 x 2,200 x 2,600 mm (LxWxH) Hopper: 3,000 x 2,000 x 2,000 mm (LxWxH)

Stanje: rabljeno, Leto izdelave: 1994, stiskalna sila: 30 t, moč: 22 kW (29,91 KM), Máquina empacadora horizontal LIKON 200C Especificaciones técnicas: Potencia del motor: 22 kW Año de fabricación: 1994 Con enfriador de aceite Atado horizontal x 4 veces Fuerza de prensado: 30 t Dimensiones totales de la prensa: 10.000 x 2.000 x 2.750 mm Peso propio de la prensa: 10 t Dimensiones de la abertura de carga: 1.400 x 700 mm Dimensiones de los fardos: 700 x 1.100 x 1.000-1.200 mm, longitud variable Con aceite hidráulico Sin alambre de atado Sin cinta transportadora, trabajó en imprenta solo con residuos secos triturados de imprenta Horas de funcionamiento: 62.639 La prensa está en buen estado, lista para trabajar ¡PRECIO A CONSULTAR! Hodpfx Asw S Hpzsh Defn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 18.593 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 140 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.300 kg, vhodni tok: 470 A, skupna masa: 47.000 kg, Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 140 K Year of manufacture: 2012 Operating hours: 18,593 hours (as of September 2024) Main press force: 140 t Pre-press force: 70 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 4.34 m³ Theoretical cycle time: 16 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 75 kW Connected load: 248 kW Total current consumption: 470 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at bulk density of: - 30 kg/m³: approx. 30 t/h - 50 kg/m³: approx. 46 t/h - 100 kg/m³: approx. 82 t/h Bale weights: 800 to 1300 kg depending on material and bale length Hfedpfx Aeu Thy Esh Den PLC control: Telemecanique TSX Micro Control panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 13,200 x 2,750 x 8,270 mm (L x W x H) Transport dimensions (baler only): 13,200 x 2,750 x 3,450 mm (L x W x H) Machine weight baler: approx. 47 t Special equipment: - 2-flap pre-compressor for large cardboard and octabins - Air separator (turbulator) for magazines and books Technical Data – Conveyor: Manufacturer: Bollegraaf Model: HBT 2250/2000 Year of manufacture: 2008 Drive power: 7.5 kW Feed belt length: 8,300 mm Incline belt length: 19,250 mm Gooseneck length: 2,400 mm Incline: 30° Usable belt width: 1,960 mm Side wall height feed belt: 500 mm Side wall height incline belt: 800 mm Weight: 16 t Scope of delivery: - Baler with pre-compressor and air separator (turbulator) - Feed belt - Incline belt with gooseneck Remarks: The baler with conveying system has already been dismantled, is in storage and available at short notice. Inspection possible by appointment. No liability is assumed for the technical information or possible errors.

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm Hsdpfx Aera A E Ujh Dsfn - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Stanje: rabljeno, Leto izdelave: 1994, stiskalna sila: 40 t, moč: 22 kW (29,91 KM), Prodajamo/oddajamo balirko BAUER 300. Hfodpfjw S Hpbex Ah Djn Tehnični podatki: Namestitev baleirke za sekundarne surovine Proizvajalec: BAUER Model: 300 Leto proizvodnje: 1994 Moč: 22 kW Pritisna sila: 40-50 t Dimenzije balirke: 10.300 x 2.000 x 3.000 mm Teža za preklop: ~ 400 kg CENA PO POVPRAŠEVANJU!

Stanje: zelo dobro (rabljeno), Manufacturer: HSM Hjdpfxov Ai Tgo Ah Dsfn Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressing force: 16 t Filling opening: 1100 x 590 mm Filling chamber dimensions: 1100 x 700 x 1130 mm Bale size: 1100 x 700 x 950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5 A Strapping: 4-fold vertical Throughput: 4 - 8 bales/hour Machine weight: 940 kg Year of manufacture: 2001-2005

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1992, stiskalna sila: 30 t, moč: 15 kW (20,39 KM), AFFORDABLE SALE – BALER WITH DEFECT! Technical Specifications: Manufacturer: Homa Model: BP3000P Year of manufacture: 1992 Feed opening: 1050 x 820 mm (L x W) Drive power: 15 kW Pressing force: 30 t Operation: horizontal, fully automatic Bale size: 800 x 900 mm Bale weight: approx. 300 kg Machine weight: approx. 5,650 kg Defect – Oil has leaked from the system; water may have entered the system! Hedjw S E T Sopfx Ah Dofn PRICE: EUR 5,500 (EXW Lithuania, Vilnius)

Stanje: zelo dobro (rabljeno), Baler HSM V-Press 825 Plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading aperture (width x height): 1195 x 530 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Machine dimensions (width x depth x height): 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Pressed materials: film, mixed paper, cardboard, die-cutting waste, textiles Year of manufacture: 2012–2014, price: 6,000 EUR Baler HSM V-Press 825 Pro, year: 2019–2021, price: 9,000 EUR Hsdev Akcispfx Ah Defn

Stanje: zelo dobro (rabljeno), Baler HSM HL 4812 Pressing force: 480 kN Hfjdpfxjv Ak Dgo Ah Den Specific pressure: 58 N/cm² Drive power: 15 kW Voltage / frequency: 400 V / 50 Hz Cycle time: 33.5 s Theoretical idle throughput: 95 m³/h Feed opening (W x L): 1020 x 1250 mm Bale size (W x H x L): 1100 x 750 x 1200 mm Bale weight: 420 kg Overall dimensions (L x W x H): 5158 x 1642 x 2550 mm Machine weight: 5899 kg Consumables type: wire Processed materials: film, mixed paper, cardboard Year of manufacture: 2017 Motor: 15 kW

Stanje: dober (rabljeno), Brand: BRAMIDAN Model: B3 Width (cm): 94 Depth (cm): 72 Height (cm): 198 Weight (kg): 310 Power (kW): 1.1 Voltage (V): 230 Chamber width (cm): 70 Hodpfx Asv Akr Reh Dsfn Chamber depth (cm): 50 Chamber height (cm): 110 Year of manufacture: 2010-2015 Pressing force (t): 3 Noise level (dB): 69

Stanje: pripravljen za uporabo (rabljen), Strautmann PP 1207 Pressing force: 58 tonnes Hodpfxjra Aq Dj Ah Dofn Bale weight: 400–500 kg (depending on material) Motor: 4 kW Bale size (LxWxH): 1200 x 700 x 800 mm Filling opening: 1145 x 430 mm External dimensions (LxWxH): 1844 x 1067 x 2868 mm Filling opening: 1145 x 430 mm Transport height: 2500 mm Baler weight: approx. 2300 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Technical specifications of the 18S baler: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Hfsdsra Aghopfx Ah Dsn Pressing time: 12 s Filling opening (W x H): 107 x 62 cm Height of filling opening above floor level: 98 cm Ejected bale* (W x H x D): approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions (W x D x H): 152 x 95 x 197 cm Weight: 850 kg Year 2003-2007: €3,500 Year 2008-2009: €3,800 Year 2010-2013: €4,500 Year 2016-2018: €5,000