Balirne stiskalnice nakup rabljenega (208)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Reciklaža in odstranjevanje odpadkov Stiskalnice za odpadke Balirne stiskalnice
Mali oglas
Brakel
754 km
Balirni stroj
BTS-MF100 Ballenpresse Waste Baler
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Die BTS-MF100 ist die ideale Ballenpresse zur Verdichtung von losem Kartonagen- und Folienabfall zu einem Ballen von bis zu 100 kg. Sie ist mit einem automatischen Presszyklus, Betriebsstundenzähler und einem Bandauswurf-System ausgestattet. Die Ballenpresse überzeugt durch ihre einfache Bedienung, höchste Arbeitssicherheit sowie ihr großes Einfüllvolumen.
Hnsdpfevaimusx Af Tjg
Durch das Verpressen dieser wertvollen und recycelbaren Materialien erreichen Sie eine Volumenreduzierung von bis zu 90 %, sparen erheblich bei Ihren Entsorgungskosten und führen das Material dem Recyclingkreislauf korrekt wieder zu.
Presskraft: 6 Tonnen
Ballengewicht: bis zu 100 kg (materialabhängig)
Ballengröße: 850 H (variabel) x 980 B x 800 T mm
Maschinenmaße: 2399 H x 1440 B x 1014 T mm
Maschinengewicht: 632 kg
Transporthöhe: 2399 / 1876 mm (auf Anfrage)
Einfüllöffnung: 980 B x 480 H mm
Taktzeit: 28 Sekunden
Motor: 1,5 kW, 13 Ampere
Stromversorgung: 220 - 240 V (1-phasig)
Geräuschpegel: 68 dB
Ausstattungsmerkmale:
- Automatisches Bedienfeld mit Ballenvollanzeige und Not-Aus mit Schlüsselsperre
- Betriebsstundenzähler
- Bandauswurf für einfaches Entfernen der Ballen
- Rückhaltekrallen gegen Rückfederung des Materials
- Rollenhalter für 4 Umreifungsbänder
- Qualitätsprodukt „Made in Europe“
Geeignet zur Verdichtung von:
- Kartonagen
- Kunststofffolien und -verpackungen
- Textilien
- Leichtwertstoffe
Optionale Zusatzausstattungen:
- Maschinenfarbe nach RAL
- Umreifungsbänder
- Stromversorgung 380 - 400 V (3-phasig)
Ballenpresse, Papierpresse, Altpapierpresse, Kartonpresse, Kartonagenpresse, Folienpresse, Papierballenpresse, Abfall-Ballenpresse, Abfallpresse, Wertstoffpresse, Müllverdichter, Müllpresse, Restmüllpresse
Mali oglas
Nizozemska
974 km
HC 50 (HPK 50)
Bramidan (Presto)Ballenpresse 50 t
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, kapaciteta rezervoarja za olje: 400 l, leto zadnje generalne obnove: 2025, volumenski pretok: 108 m³/h, Technical Data – Baler:
Manufacturer (according to nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG)
Model: HC 50 (equivalent to Presto HPK 50)
Year of manufacture: 2007
Operating hours: 13,209 hours (status: March)
Number of bales pressed: 23,379 pcs
Pressing force: 50 t
Specific press force: 650 kN/m²
Feed chute dimensions: 1250 x 1050 mm (L x W)
Filling volume: 0.96 m³
Theoretical cycle time: 32 seconds
Theoretical throughput: 108 m³/hour
Bale dimensions: 1100 x 700 mm (W x H), length variable
Drive power: 15 kW
Total current consumption: 50 A
Tying: 4-fold vertical, fully automatic
Throughput rates (by bulk density):
- 30 kg/m³: approx. 3.1 t/hour
- 60 kg/m³: approx. 4.5 t/hour
- 100 kg/m³: approx. 7.2 t/hour
Bale weights (with bale length 1.2 m): up to 500 kg, material-dependent
Hydraulic oil tank capacity: 400 L
Hjdpfx Afew U Dt Nj Teng
PLC: Siemens S7-200
Effective transport dimensions (excluding baler):
6780 x 1800 x 2100 mm (L x W x H)
Transport weight (baler): 8.5 t
Condition of the Baler:
The baler was in operational use within a production environment, used exclusively for compacting cardboard, and serviced regularly. With only 13,209 operating hours, the machine has low mileage for its type. The baler has been partially overhauled and subsequently tested in our workshop.
The following overhaul work was carried out:
- Machine cleaned
- Bale retaining claws freed and lubricated
- Light barrier replaced
- Twisting unit completely dismantled, all bearings and plastic sliding blocks replaced, lubricated, chain tension adjusted
- Knife and counter-knife removed, sharpened, reinstalled
- Knife gap newly adjusted
- General maintenance and lubrication performed
Scope of delivery:
- 1 baler incl. wire reel boxes, without wire
- 1 set of machine documentation
Remarks:
The complete documentation (operating instructions, CE declaration, electrical/hydraulic schematic) is available. Viewing possible by appointment. We accept no liability for the technical information or for possible errors.
Mali oglas
Bratislava
277 km
Klešče za bale
HSMVK 1005
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6422.P01.347, teža bale: 100 kg, vrsta vhodnega toka: trifazni, moč: 7,5 kW (10,20 KM), leto zadnje generalne obnove: 2023, Stroj je priložen s celotno električno shemo.
Hedpfx Afoxz Avus Tsng

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Stuhr
887 km
Balairka
PaalKonti 325 D/SO
Klic
Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 50.702 h, Funkcionalnost: popolnoma funkcionalen, Baler Paal Konti 325 D/SO, Year of Manufacture 1999
Technical Data:
Manufacturer: Paal
Model: Paal Konti 325 D/SO
Year: 1999
Operating Hours: 50,702
Pressing Force: 94 t
Total Power Requirement: 128 kW
Feed Opening: 1020 x 1750 mm
Bale Size: 750 x 1100 mm, variable length
Tying: 4-fold automatic
Throughput at
35 kg/m³ approx. 14 t/h
60 kg/m³ approx. 24 t/h
100 kg/m³ approx. 38 t/h
Bale Weight: 525 to 800 kg
Transport Dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH)
Machine Weight: approx. 28,000 kg
Materials: Paper, Cardboard, Light Municipal Waste, Plastic Waste
Comments:
Hjdpfox I D N Sox Af Teng
The baler is currently still in operation. Dismantling is planned for January 2026. An inspection under operating conditions is possible. Please note: The conveyor belt shown in the pictures is not included in the scope of delivery.
Please note:
All technical data are based on the manufacturer's information. We do not accept liability for the provided details or possible errors. This offer is non-binding, subject to prior sale and revocable at any time.
Inspections are possible by arrangement. Sale is ex works, advance payment only, without warranty or guarantee.
Mali oglas
Borken
868 km
Valjčni kompresor s sesanjem Brück
WelgerBallenpresse RC 660
Klic
Stanje: dober (rabljeno), Welger
Type: RC 660
Roll Compactor with Bridge Extraction
Compact and fully automatic
Exclusively designed for the production of pressed bales from low-density packaging materials.
Application Variants
Materials to be processed
Paper edge trims (strips and continuous)
Paper and film bags
PP film edge trims
Film strips
Garment protective film (PP/PE films)
PP/PE fibre material
Insulation and nonwoven materials
Foam grids
Packaging foam
Tetra Pak cartons
Dimensions: 2100 mm (L) x 940 mm (W) x 1755 mm (H)
Feed hopper dimensions: 330 mm x 600 mm
Max. bale size: 400 mm x 600 mm
Bale weight: 20 – 30 kg depending on material
Compaction density: 250 – 400 kg/m³ depending on material
Throughput / daily output: 30 bales per day
Feed rate: 0.36 m/s
RC 660
3x 400V, 50Hz, 16A
2.2 kW, 5.0A
Weight: 700 kg
Bridge Extraction System
Model: KFA
Size: 60-30-3000
Airflow: 6,000 m³/h
Motor power: 0.3 kW
Filter area: 30 m²
Hnjdpfxodtxbis Af Tsg
Vacuum: 3,100 Pa
Condition: used
Scope of delivery: (See photo)
(Specifications and technical data may be subject to change and errors!)
For further questions, feel free to contact us by phone.
Odkrijte več rabljenih strojev
Mali oglas
Velbert
815 km
Balirni stroj
HSMVK 4812
Klic
Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 20.580 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 450 kg, vhodni tok: 59 A, skupna masa: 12.000 kg, transportna višina: 2.750 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), transportna širina: 2.300 mm, transportna dolžina: 8.500 mm, kapaciteta rezervoarja: 300 l, Good day,
We are pleased to offer you, without obligation, a used baler manufactured by HSM, model VK 4812.
The following technical data has been taken from the manufacturer's operating manual and brochures, for which we do not assume any responsibility for accuracy or completeness.
Manufacturer: HSM
Model: VK 4812
Year of manufacture: 2011
Operating hours: 20,580 hours
Main press force: 48 t
Drive power: 30 kW
Machine weight (press): 12 t
Hnjdpfot H Rcasx Af Tsg
The machine documentation is available in German. An inspection can be arranged by appointment at our workshop.
We would be pleased if this machine is of interest to you.
Your service team at Mertens & Frowein GmbH
Mali oglas
Brakel
754 km
Balirni stroj
BTS-MF60 Ballenpresse Waste Baler
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF60 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 60 kg. With an additional press insert, it is even suitable for compressing individual metal and plastic containers, as well as cans. The baler impresses with its simple and safe operation, along with its large feed opening. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly cut your disposal costs, and properly return the material to the recycling cycle.
Pressing force: 3.5 tonnes
Bale weight: up to 60 kg (material-dependent)
Bale dimensions: 800 H (variable) x 700 W x 500 D mm
Machine dimensions: 1996 H x 1040 W x 720 D mm
Machine weight: 260 kg
Transport height: 1996 mm
Feed opening: 700 W x 492 H mm
Pressing cycle: 24 seconds
Motor: 1.5 kW, 13 amps
Power supply: 220 – 240 V (single-phase)
Hnedpfx Ajzd Rkef Teg
Noise level: 68 dB
User-friendly lever operation
Bale trolley for easy bale removal
Retainer to reduce material spring-back
Holder for strapping bands
A quality product "Made in Europe"
Suitable for compacting:
Cardboard
Plastic film
Cans and light metal containers
Canisters and light plastic containers
Textiles
Light recyclables
Additional options:
Annual maintenance including safety inspection (UVV)
Machine colour in RAL as per request
Can/crush insert
PLC control with automatic pressing cycle, bale-ready indicator, and emergency stop with key
Strapping bands
Power supply 380 – 400 V (three-phase)
Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste bale press, waste compactor, recycling press, garbage compactor, refuse baler
Mali oglas
Nizozemska
974 km
HBC 60 A
Bollegraaf Recycling Solutions B.V.HBC 60 A
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations.
Technical data (baler):
Manufacturer: Bollegraaf Recycling Machinery B.V.
Model: HBC 60A
Year of manufacture: 2000
Operating hours: 32,169 hours (as of November 2024)
Main press force: 60 t
Pre-press force max.: 25 t
Feed chute dimensions: 1,320 x 1,100 mm
Theoretical cycle time: 18 seconds
Bale size: 1,100 x 720 mm, variable length
Drive power: 45 kW
Hjdpfx Aeviwdmjf Tjng
Total connected load: 60 kW
Tying: 5-fold vertical
Throughput rates at a bulk density of
30 kg/m³: approx. 5.5 t/h
50 kg/m³: approx. 10 t/h
100 kg/m³: approx. 16 t/h
Bale weights: 400 up to 750 kg, depending on material
PLC: Telemecanique TSX Micro
Baler weight: approx. 22 t
Scope of supply:
1 chain belt conveyor
1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator)
1 maintenance platform with access ladder
2 wire stations with guide pulleys for 10 wire reel stands (without wire)
The following repair and overhaul work has been carried out:
- Hydraulic oil tank drained, cleaned, and refilled with new oil
- Oil filter and air filter replaced
- Hydraulic block partially resealed
- Hydraulic hose at the hydraulic block replaced
- Wire run-in marks at the base passages welded and smoothed
- Tying unit cleaned and serviced
- Electrical system repaired, door interlock switches partially replaced
- Fluffing unit repaired
- General maintenance carried out, machine lubricated
- Machine tested under power, without material, in manual and automatic mode—see function video
Remarks:
The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.
Mali oglas
Stuhr
887 km
Vertikalna balirka
HSMVL 600
Klic
Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Vertical baling press HSM VL 600, year of manufacture 2002
Hedpfx Afex Iryro Tsng
Technical data:
Manufacturer: HSM
Model: HSM VL 600
Year of manufacture: 2002
Pressing force: 60 t
Drive power: 7.5 kW
Cycle time (idle): 37 s
Filling height: 1130 mm
Filling opening: 1150 x 735 mm
Bale size: 1200 x 1100 x max. 1200 mm
Bale weight: 550 kg
Weight: 3575 kg
Materials processed: paper, cardboard, film
The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available.
Inspections, including live demonstrations, are possible at any time by prior arrangement. Upon request, we can also conduct test runs with your material for a service fee.
If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and on Friday from 08:00 to 13:00.
Please note:
All technical data are based on the manufacturer’s information. We accept no liability for the stated details or possible errors.
This offer is subject to change, prior sale reserved, and may be withdrawn at any time.
Inspections are possible by prior arrangement.
Sale ex works, advance payment required, without warranty or guarantee.
Mali oglas
Velbert
815 km
Balirni stroj
Presto GmbH & Co. KGHPK 50 B
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 15.604 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.050 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 700 mm, teža bale: 500 kg, skupna širina: 1.700 mm, skupna višina: 2.400 mm, skupna dolžina: 7.800 mm, vhodna napetost: 400 V, vhodni tok: 64 A, skupna masa: 12.500 kg, transportna višina: 2.400 mm, moč: 30 kW (40,79 KM), leto zadnje generalne obnove: 2024, volumenski pretok: 160 m³/h, transportna širina: 1.700 mm, transportna dolžina: 7.800 mm, kapaciteta rezervoarja: 600 l, Good day,
We hereby offer you, subject to prior sale, a used baling press manufactured by Presto GmbH & Co. KG, model HPK 50 B.
Hodpfxsuan Hzs Af Tong
The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability.
Manufacturer: Presto GmbH & Co. KG
Model: HPK 50 B
Year of manufacture: 2005
Main press force: 50 t
Drive power: 30 kW
Total connected load: 31.5 kW
Rated current: 64 A
Throughput rate under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour
Machine weight (press): 12.5 t
Note:
The machine is currently undergoing refurbishment in our workshop and is expected to be tested for operational readiness and prepared for sale in February.
The machine documentation is available in German. Inspection of the press at our workshop is possible by appointment.
We would be pleased if this machine is of interest to you.
Your service team at Mertens & Frowein GmbH
Mali oglas
Brakel
754 km
Balirni stroj
BTS-MF650 Ballenpresse Waste Baler
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF650 is the ideal bale press for compacting your loose cardboard and film waste into a bale weighing up to 650 kg. The baler impresses with its simple and safe operation and large feed opening, making it optimal for handling very high material volumes.
By compacting this waste/recyclable material, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and efficiently return the material to the recycling loop.
Pressing force: 50 tons
Bale weight: up to 650 kg (material dependent)
Bale size: 1100 H (var.) x 1500 W x 1100 D mm
Machine dimensions: 3217 H x 2100 W x 1524 D mm
Machine weight: 1930 kg
Transport height: 2500 mm
Feed opening: 1500 W x 770 H mm
Pressing cycle: 40 seconds
Motor: 5.5 kW, 16 Amp
Power supply: 380 – 400 V (3 phase)
Noise emission: 68 dB
Double-cylinder design for consistent material compaction
User-friendly lever operation
Bale ejector for easy removal of finished bales
Retaining claws to reduce material spring-back
Holder for strapping bands
A quality product "Made in Europe"
Suitable for compacting:
Cardboard
Film
Hnedpfsbhxbtsx Af Teg
Big bags
Clothing
Lightweight recyclables
Additional options:
Annual maintenance with safety inspection (UVV)
Machine colour according to RAL palette
PLC control with automatic press cycle, bale-ready indicator, and E-stop with key
Vertical door
Strapping bands
11 kW, 32 Amp motor
Baler, paper baler, waste paper compactor, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, refuse press, recycling press, waste compactor, waste press, residual waste compactor
Mali oglas
Stuhr
887 km
Balairka
Dixi60 SLS
Klic
Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Bale Press Dixi 60 SLS, Year of manufacture 2013
Technical Data:
Manufacturer: Maschinenfabrik Bermatingen
Year of manufacture: 2013
Pressing force: 60 t
Drive power: 11 kW, 32 A
Feed opening: 990 x 1110 mm (W x L)
Bale dimensions: 1100 x 800 x 1200 mm
Bale weight: approx. 370-450 kg
Tying: 3-fold manual
Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H)
Weight: approx. 5220 kg
Materials: PET, paper, cardboard, film
Hnsdpfx Afox Irxus Teg
The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included.
Viewing, including under power, is possible at any time by arrangement. Upon request, we can also carry out tests with your material for an expense allowance.
We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00.
Please note:
All technical data are based on the manufacturer's information. We do not accept any liability for the details provided or for possible errors.
This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by arrangement.
Sale is ex-works, prepayment required, without warranty or guarantee.
Mali oglas
Velbert
815 km
Balirni stroj
Presona ABLP 80 VH1
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day,
We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1.
The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness.
Manufacturer: Presona AB, Sweden
Model: LP 80 VH1
Year of manufacture: 2007
Total operating hours: 21,676 hours (as of November 2024)
Press force (main press): 78 t
Specific press force: 95 N/cm²
Pre-compression flap force: 28 t
Feed opening dimensions: 1,500 x 1,100 mm
Fill volume per press cycle: 2.7 m³
Throughput under operating conditions: 410 m³/hour
Bale dimensions: 1,100 x 750 mm
Drive power: 55 kW
Tying: 5-fold vertical
Hydraulic oil tank capacity: 1,000 L
Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H)
Machine weight (baler) approx. 25 t
Hnedpfx Aovgrh Uef Tog
Note:
The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement.
We would be pleased if this machine is of interest to you.
Your service team at Mertens & Frowein GmbH
Mali oglas
Brakel
754 km
Balirni stroj
BTS-Sackpresse BTS-Bag Press
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS bag press is ideal for compacting your dry and wet waste directly into a garbage bag. It reliably and safely reduces the volume of bulky residual waste and recyclables to a minimum. The bag press impresses with its user-friendly operation and its outstanding volume reduction of up to 90%.
By compacting these waste and recyclable materials, you can significantly reduce your disposal costs while also ensuring a safer and cleaner working environment.
Pressing force: 3 tons
Compaction: up to 90% (depending on material)
Machine dimensions: 1861 H x 1200 W x 630 D mm
Machine weight: 325 kg
Transport height: 1861 mm
Hnjdpfx Afsbhu Iqs Teg
Press cycle time: 20 seconds
Motor: 1.5 kW, 13 Amp
Electrical supply: 220 - 240 V (single phase)
Noise level: 68 dB
User-friendly lever operation
Optimal use of garbage bags
Reduces the number of refuse sacks required
No need to climb into waste containers
Decreases the frequency of waste collections
A quality product "Made in Europe"
Suitable for compacting:
Wet and dry residual waste
Recyclable materials
Paper and cardboard
Lightweight recyclables
Additional options:
Annual maintenance with UVV safety inspection
Machine color according to RAL
Galvanized version
Control system with automatic press cycle
Power supply 380 - 400 V (three-phase)
Refuse press, waste compactor, waste press, waste compactor, residual waste press, residual waste compactor, baling press, paper press, waste paper press, cardboard press, cardboard box press, film press, paper baler, waste baler, waste material press, valuable material press, waste compactor, refuse press, residual waste press
Mali oglas
Stuhr
887 km
Balairka
Dixi60 SLS
Klic
Stanje: dober (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Baler Dixi 60 SLS, Year of manufacture 2016
Hedpfx Afsx Irxho Teng
Technical Data:
Manufacturer: Maschinenfabrik Bermatingen
Year: 2016
Pressing Force: 60 t
Drive Power: 11 kW, 32 A
Feed Opening: 990 x 1110 mm (W x L)
Bale Dimensions: 1100 x 800 x 1200 mm
Bale Weight: approx. 370–450 kg
Tying: 3-fold manual
Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H)
Weight: approx. 5220 kg
Materials: PET, paper, cardboard, film
The press is in good condition. It has been inspected and tested by us. You can find a video on our website or YouTube channel. The operating manual and CE declaration are available.
Inspections, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for a service fee.
We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00.
Please note:
All technical data are based on the manufacturer's specifications. No liability is assumed for the information provided or for possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.
Mali oglas
Velbert
815 km
Balirni stroj
StrautmannBaleTainer
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, obratovalne ure: 18.819 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.085 mm, dolžina polnilne odprtine: 2.815 mm, dolžina bale: 1.200 mm, širina bale: 100 mm, višina bale: 800 mm, teža bale: 400 kg, skupna širina: 3.140 mm, skupna višina: 2.900 mm, skupna dolžina: 8.840 mm, skupna masa: 7.380 kg, transportna višina: 2.900 mm, moč: 9 kW (12,24 KM), leto zadnje generalne obnove: 2023, transportna širina: 2.400 mm, transportna dolžina: 5.650 mm, Good day,
We hereby offer you a used baler from the manufacturer Strautmann, model BaleTainer.
The following technical specifications have been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee the accuracy or completeness.
Manufacturer: Strautmann
Model: BaleTainer
Year of manufacture: 2013
Hnedpfet H Rgfsx Af Teg
Operating hours: 18,819 hours
Number of bales pressed: 7,019 units
Main press force: 60 t
Drive power: 9.2 kW
Machine weight (press): 7.38 t
The press has undergone partial refurbishment. The piston rods and seal kits of the two main hydraulic cylinders have been replaced, and general maintenance work such as oil and filter changes has been carried out. Following these refurbishment works, the machine has been tested.
For loading, the press is equipped with a hydraulic tipping device to empty mesh box containers at a truck loading dock. For example, the machine can be positioned with the tipping device at a loading dock. There, employees can roll paper to the tipping device using a mesh trolley and then have it tipped hydraulically into the press.
Alternatively, you can load the machine from the side via the large feed/storage hopper using a forklift or wheel loader. Continuous conveyor belt feeding would also be feasible.
The machine documentation is available in German. An inspection is possible by appointment at our workshop.
We would be pleased if this machine is of interest to you.
Your Mertens & Frowein GmbH Service Team
Mali oglas
Brakel
754 km
Balirni stroj
BTS-MF550 Ballenpresse Waste Baler
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF550 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 550 kg. This baler stands out thanks to its easy and safe operation as well as its large feed opening, making it perfect for handling high material volumes.
By compacting these waste and recyclable materials, you achieve up to 90% volume reduction, significantly reduce your disposal costs, and correctly reintegrate the material into the recycling loop.
Pressing force: 50 tons
Bale weight: up to 550 kg (depending on material)
Bale size: 1200 (h, variable) x 1500 (w) x 800 (d) mm
Machine dimensions: 3217 (h) x 2115 (w) x 1200 (d) mm
Machine weight: 1650 kg
Transport height: 2500 mm
Feed opening: 1500 (w) x 770 (h) mm
Pressing cycle time: 40 seconds
Motor: 5.5 kW, 16 Amp
Power supply: 380 - 400 V (3 phase)
Noise level: 68 dB
Double cylinders ensure uniform compaction of material
User-friendly lever controls
Bale ejector for easy bale removal
Retention claws to reduce material spring-back
Holder for strapping bands
A quality product "Made in Europe"
Hsdpfofgbtcsx Af Tsng
Suitable for compacting:
Cardboard
Film
Big Bags
Textiles
Lightweight recyclables
Additional options:
Annual maintenance with accident prevention inspection (UVV)
Machine painted in RAL colours
PLC control with automatic press cycle, bale-ready indicator, and E-stop with key
Vertical door
Strapping bands
11 kW motor, 32 Amp
Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, waste compactor, recyclable press, refuse compactor, trash press, general waste baler.
Mali oglas
Stuhr
887 km
Vertikalna balirka
HSMV-Press 1160 plus
Klic
Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016
Technical specifications:
Manufacturer: HSM
Model: V-Press 1160 plus
Year of manufacture: 2016
Pressing force: 55 t
Drive power: 4 kW
Hedsx Irw Rjpfx Af Tong
Cycle time (idle): 25 s
Filling height: 1115 mm
Filling opening: 1195 x 650 mm
Bale size: 1200 x 1100 x max. 1200 mm
Bale weight: 550 kg
Dimensions: 1700 x 1800 x 2200 mm (W x D x H)
Weight: 2430 kg
Materials: paper, cardboard, film
The baler is in good condition. Operating manual and CE declaration are available.
Inspections, including under power, can be arranged at any time by appointment. Upon request, we can also carry out tests with your material for a handling fee.
We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00.
Please note:
All technical data are based on the manufacturer's information. We accept no liability for the stated details or possible errors.
This offer is non-binding, subject to prior sale, and can be revoked at any time.
Inspections can be arranged by appointment.
Sale is ex works, only against prepayment, without warranty or guarantee.
Mali oglas
Stuhr
887 km
Balairka
PaalPacomat II
Klic
Stanje: rabljeno, Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Bale Press Paal Pacomat II with Hopper, Year of Manufacture 1979
Technical Data:
Manufacturer: Paal
Model: Pacomat II
Year: 1979
Drive Power: 11 kW
Pressing Force: 27 t
Channel Cross Section: 700 x 1000 mm
Feed Opening: 1000 x 650 mm
Throughput: approx. 60/115 m³/h
Bale Size: 700 x 1000 mm
Hedpjx Irvajfx Af Tong
Bale Weight: up to 400 kg
Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH)
Machine Weight: approx. 5200 kg
Materials: Paper, Cardboard, Film
Remarks:
The machine is in working condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or on our YouTube channel.
Inspections, including under power, are possible at any time by prior arrangement. Upon request, we can also carry out tests with your material for a handling fee.
We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00.
Please note:
All technical data is based on manufacturer information. We accept no liability for the information provided or for any errors.
Offers are non-binding, subject to prior sale and can be revoked at any time.
Inspections are possible by prior arrangement.
Sale is ex location, without warranty or guarantee.
Our payment term is 100% advance payment.
Mali oglas
Stuhr
887 km
Balairka
Dixi80 SLD
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 1.030 h, Funkcionalnost: popolnoma funkcionalen, Baling Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016
Manufacturer: Dixi
Model: Dixi 80 SLD
Year: 2016
Operating hours: 1030
Drive power: 11 kW, 400 V / 32 A
Filling opening: 1,040 x 1,110 mm (W x L)
Pressing force: 80 t
Press cycle: approx. 35 s
Capacity: approx. 1,000 kg/h
Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L)
Bale weight: approx. 500-600 kg
Tying: 3-fold, manual
Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H)
Machine weight: approx. 8,000 kg
Hjdpfx Afsx Irucj Tong
Materials: Paper, cardboard, corrugated board
The operating manual is available.
Note: The press is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video is available on our website or YouTube channel. The hydraulic hoses should be replaced.
Viewing, including powered inspection, is possible by appointment at any time. Upon request, we can also carry out tests with your material for a handling fee.
If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00.
Please note:
All technical data is based on manufacturer's information. We do not accept liability for the information provided or for any potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Viewing is possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.
Mali oglas
Stuhr
887 km
Vertikalna balirka
Dixi50 S
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Vertical Baler Dixi 50 S, Year of Manufacture 2019, Very Good Condition
Technical Specifications
Manufacturer: Maschinenfabrik Bermatingen
Model: Dixi 50 S
Year of Manufacture: 2019
Drive Power: 7.5 kW
Pressing Force: 50 t
Pressing Cycle: 23 s
Filling Opening: 1200 x 620 mm
Hedpfx Afex Irlhj Tong
Filling Height: 1000 mm
Bale Size: 1200 x 800 x 830 mm
Bale Weight: 300-350 kg
Tying: Manual
Transport Dimensions: 1600 x 1300 x 2200 mm
Weight: 2300 kg
Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, fleece, glass wool, etc.
The operating manual and EC Declaration of Conformity are available in German.
Remarks:
The machine is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or on our YouTube channel.
Viewing, including under power, is possible at any time by arrangement. On request, we can also carry out tests with your material for a service fee.
If you have any questions regarding the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00.
Please note:
All technical data is based on manufacturer specifications. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Viewings by prior arrangement. Sale is ex location, without warranty or guarantee.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Stuhr
887 km
Vertikalna balirka
Dixi50 S
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Vertical baling press Dixi 50 S, year of manufacture 2020, very good condition
Technical data:
Manufacturer: Maschinenfabrik Bermatingen
Model: Dixi 50 S
Year of manufacture: 2020
Drive power: 7.5 kW
Pressing force: 50 t
Pressing cycle: 23 s
Feed opening: 1200 x 620 mm
Feed height: 1000 mm
Bale size: 1200 x 800 x 830 mm
Bale weight: 300–350 kg
Binding: manual
Transport dimensions: 1600 x 1300 x 2200 mm
Weight: 2300 kg
Hsdpfsx Irk Dox Af Tjng
Suitable materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc.
The operating manual and EC declaration of conformity are available in German.
Remark:
The machine is in very good, as-new condition. The seals on both cylinders for the retaining clamps have been renewed. The machine has been inspected and tested at our site in 28816 Stuhr. A video is available on our website or our YouTube channel.
Viewing, including under power, is possible at any time by prior arrangement. Upon request, we can also perform test runs with your material for a handling fee.
For questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00.
Please note:
All technical data is based on information provided by the manufacturer. We do not accept any liability for the information given or for possible errors.
Offers are subject to change, prior sale reserved, and may be revoked at any time.
Viewings are possible by arrangement.
The sale is ex location, without warranty or guarantee.
Mali oglas
Stuhr
887 km
Vertikalna balirka
Dixi50 S
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Vertical Baling Press Dixi 50 S, Year of Manufacture 2019
Technical Specifications
Manufacturer: Maschinenfabrik Bermatingen
Model: Dixi 50 S
Year of manufacture: 2019
Drive power: 7.5 kW
Pressing force: 50 t
Pressing cycle: 23 s
Filling opening: 1200 x 620 mm
Filling height: 1000 mm
Bale size: 1200 x 800 x 830 mm
Bale weight: 300–350 kg
Tying: manual
Transport dimensions: 1600 x 1300 x 2200 mm
Weight: 2300 kg
Hnsdpfxex Irimo Af Tjg
Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, polystyrene, fleece, glass wool, etc.
The operating manual and EC Declaration of Conformity are available in German.
Note:
The machine is in very good condition. It has been inspected and tested at our facilities in 28816 Stuhr. A video is available on our website or YouTube channel.
Viewings, including under power, are possible at any time by appointment. On request, we can also carry out test runs with your material for a service charge.
We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Friday we are available from 08:00 to 13:00.
Please note:
All technical data is based on manufacturer information. No liability is accepted for the accuracy of the information provided or for possible errors.
All offers are subject to prior sale and change without notice.
Inspections are possible by appointment.
Sale is ex-site, without warranty or guarantee.
Mali oglas
Stuhr
887 km
Balairka
PresonaLP 85 VH2
Klic
Stanje: dober (rabljeno), Leto izdelave: 2018, obratovalne ure: 40.350 h, Funkcionalnost: popolnoma funkcionalen, Baler Presona LP 85 VH2 with Cross-Tie System, Year of Manufacture 2018
Technical Specifications:
Manufacturer: Presona Sweden
Model: LP 85 VH2
Year of Manufacture: 2018
Drive Power: 2 x 45 kW
Operating Hours: 40,350
Effective Operating Hours: approx. 22,000
Prepress Force: 28 t
Main Press Force: 85 t
Feed Opening: 1500 x 1100 mm
Bale Dimensions: 750 x 1100 mm
Bale Weight: 450 - 650 kg
Theoretical Throughput: 1,200 m³/h
Practical Throughput (at 30-100 kg/m³): 13-30 t/h
Tying: 5-fold vertical, 3-fold horizontal
Oil Tank Capacity: 2,000 L
Transport Dimensions (Press): 10,400 x 2,400 x 2,800 mm (LxWxH)
Weight: approx. 27,000 kg
The baler was dismantled from ongoing operation. A spare parts package is included in the scope of delivery.
Technical documentation is available.
Hodpfxox Irige Af Tjng
Please note:
All technical specifications are based on manufacturer’s information. We accept no liability for the above details or potential errors.
This offer is subject to change, prior sale reserved and can be withdrawn at any time.
Inspections are possible by appointment.
Sale is ex works, prepayment only, without warranty or guarantee.
Mali oglas
Stuhr
887 km
Balairka
EuropressEP 6500 V5H4
Klic
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 15.350 h, Funkcionalnost: popolnoma funkcionalen, Europress EP 6500 V5 H4, cross-tying, year of manufacture 2009
Technical data:
Manufacturer: Europress
Model: 6500 V5 H4
Year of manufacture: 2009
Operating hours: approx. 15,334 hours
Number of bales: 138,097 bales
Main press force: 120 t
Specific pressing force: 142 kg/cm²
Hnjdpjx Irh Nsfx Af Tjg
Feed opening dimensions: 1,650 x 1,100 mm
Filling volume: 3 m³
Feed volume per pressing cycle: 1.58 m³
Bale dimensions: 730 x 1,100 mm
Drive power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable)
Total connected load: 83 kW
Current consumption: 150 A
Tying system: 5-fold vertical, 4-fold horizontal, fully automatic
Bale weights: 450–900 kg
Hydraulic oil tank volume: 1,200 L
PLC control: Siemens S7-200
Operator panel: Siemens touchscreen
Machine dimensions installed with hopper: 13,465 x 5,200 x 5,074 mm
Transport dimensions (press): 9,965 x 2,500 x 2,900 mm (L x W x H)
Machine weight (press): approx. 28 t
Work performed on the EP 6500 V5:
- Completely derusted and repainted
- Inner steel floor of the press fully renewed
- Ram overhauled (steel structure)
- Complete overhaul of the horizontal and vertical lance boxes
- Complete renewal of the internal Hardox lining
- All hydraulic hoses replaced
- Replacement of both piston lifts
- New knives and counter-knives
- All hydraulic cylinders resealed and tested
- All sliding and guide plastics replaced
- Wire deflection rollers replaced
- Various cables and sensors renewed
- Various electrical components renewed (control cabinet)
- Complete electrical/control system inspection
- Complete hydraulic pressure check
Remarks:
The machine has been overhauled, inspected, and tested by us. You can find a video on our website or YouTube channel.
Inspections, also under power, are possible at any time by appointment.
We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m.
Please note:
All technical data refers to information provided by the manufacturer. We accept no liability for the information or possible errors.
All offers are non-binding, subject to prior sale, and may be withdrawn at any time.
Inspections are possible by arrangement.
The sale is ex location, without warranty or guarantee.
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni balirne stiskalnice (208)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































































































































































































































































































































