Stiskalnica za odpadni papir Zentex PPH5.

Zentex PPH5

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Dksdpfx Afsqt Dmyoler Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 560 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 620 (3D), največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 13.000 W, število osi: 3, Ta 3-osna stroj DMG MORI CMX 1100 V je bil izdelan leta 2017. Ponaša se z impresivnimi pomiki osi: 1100 mm v osi X, 560 mm v osi Y in 510 mm v osi Z. Stroj je opremljen s 30-mestnim magazinom orodij in krmilnikom HEIDENHAIN TNC 620. Če iščete kakovostne možnosti obdelave, razmislite o nakupu našega vertikalnega obdelovalnega centra DMG MORI CMX 1100 V. Za dodatne informacije nas kontaktirajte. • Obratovalne ure: • Vreteno po zamenjavi: 2.900 h • Vreteno (skupaj po števču): 32.420 h Dedpfx Aeylkl Teflokr • Obratovalno število ur (števec): 60.300 h • Stanje: V uporabi in v proizvodnji; možen ogled (funkcionalnost, geometrija, splošno stanje) • Velikost mize: 1.400 × 560 mm • Dinamika osi: Hitri pomik 30 m/min (linearne osi) • Vreteno: • Vpenjanje orodja: DIN 69872 • Magazin orodij: 30-mestni verižni magazin z dvojnim prijemalom • Hlajenje/mediji: Preklop hladilna tekočina-zrak prek M-funkcije (zunanja), posoda za odrezke • CNC krmilje: HEIDENHAIN TNC 620 (3D) z ASCII tipkovnico in 15'' monitorjem • Merilni sistemi: Direktni merilni sistemi (linearne vodila) na X/Y/Z; zračno izpiranje merilnih sistemov • Dodatne opcije stroja: • Varnostni napetostni paket: Motorji osi X in Y z zavoro, prenapetostna zaščita, nadzor prenizke napetosti z izklopom v sili • Programske opcije – HEIDENHAIN: • Opcija 3 (#21): Korekcija radija orodja M120 za konturno obdelavo, LOOK AHEAD do 99 blokov, 3D-obdelava, ročno kolo M118 med izvajanjem programa Dodatna oprema • Transporter ostružkov s strgalom (leva stran) • Rezervoar za hladilno tekočino, 250 l • Ročna pršilna pištola za delovno območje • 4-barvni signalni stolp • HEIDENHAIN merilni paket: brezžična merilna sonda za obdelovanec in kalibracijski obroč • Ročno kolo (prenosna upravljalna enota) Dodatne informacije • Novembra 2024 je DMG servis vgradil povsem novo originalno vreteno DMG • Servisno poročilo vključuje tako meritve vretena kot tudi meritve geometrije stroja po zamenjavi Tehnične specifikacije Stožčasta velikost SK 40

Stanje: rabljeno, Bottle filling line with a capacity of 30,000 bottles per hour. Suitable for 0.33l Vichy, 0.33l Euro, 0.35l Frucade, and 0.5l NRW single-use and returnable bottles. The plant is comprised of the following machines/components: - Depalletizing and palletizing system Manufacturer: Radenska & Steinle - Unpacker Manufacturer: SZA Federspiel - New glass depalletizer Manufacturer: Steinle Fördertechnik - Uncorker Manufacturer: Rink - Bottle washer Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer warmer Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cap hopper with magnetic conveyor Manufacturer: Gassner - Bottle fill level inspector Manufacturer: Metec - Labeller Dkodpfx Afsvu Tt Isljr Manufacturer: Krones/Renner - Label inspection system Manufacturer: Miho - Packer Manufacturer: SZA Federspiel - Full crate inspector Manufacturer: Metec - Bottle carrier erecting unit Machine details (additional): Includes depalletizer and palletizer, years of construction 1993 - 2009 Features: Depalletizing and palletizing system, unloader, new glass depalletizer, uncorker, bottle washer, crate washer, bottle inspector, beer warmer, bottle filler, crown cap feeding system, fill level inspection, labeller, label inspection, packer, full crate inspection, bottle carrier erecting unit.

Stanje: rabljeno, Scrubber dryer, floor cleaning machine, sweeper - Delivery in as-is condition as inspected - Machine is supplied without battery, brush, and squeegee Dksdpfx Afsc R S E Seler - Working width: 500 mm - Battery charger included - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, obratovalne ure: 3.100 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8.960 kg, Willibald MZA 2500/Drobilec/Rezkalnik/Seckalnik • Proizvajalec: Willibald • Tip: MZA 2500 • Leto izdelave: 1988 • Delovne ure: 3100 h • Motor: V6 Mercedes-Benz • Zmogljivost: 75 m³/h glede na material • Prehod: 500 mm • Premični kladivi • Vlaknjenje organskih materialov za kompostiranje (vrtni odpad, leseni obrez do premera 30 cm) Dsdpfx Asxu Dipjflekr • Drobljenje odpadnega lesa do premera 30 cm • Število osi: 2 tandem/BW osi • Zavorni sistem: zrak • Priklop: 40 mm • Skupna teža: 8960 kg • Nemški stroj • Takoj pripravljen za uporabo • Ponudba ni zavezujoča in je prosta sprememb. - Predhodna prodaja pridržana, - Možne napake in tipkarske napake. - Prodaja po naših splošnih pogojih.

Leto izdelave: 2001, stanje: dober (rabljeno), HSM-500.1_VL BALER PAPER BALER FILM BALER Immediately operational, good CONDITION Used & good / see photos Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Press force: 50 tons Voltage: 400V; Frequency: 50 Hz Power: 7.5 kW Current: 15.5 A Compression force: 6 tons Dkedpfx Aolc Du Noflsr Year of manufacture: 2001 Additional balers available in our other listings Item used and in good condition / roughly cleaned (Plug in and ready to operate) Dimensions: On request!! Additional photos show potential usage options. All items visible in the photos are also available from us. Price quoted is net per unit Ex works 47441 Moers Current stock: 1 unit Inspection is expressly offered. More machinery in stock See photos or enquire by phone General information: We offer items acquired from various liquidations, described to the best of our ability, and provide clear photos. Further details about the item cannot be provided. We offer the opportunity for viewing by appointment on Tuesdays and Thursdays between 9 am and 4 pm. If needed, the item can be taken immediately. We can only respond to enquiries about this listing if you provide a telephone number due to time constraints. Unless explicitly stated otherwise, this listing concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically sound as far as can be determined. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. If interested, feel free to call. All dimensions are approximate. Errors and omissions excepted.

Leto izdelave: 1991, stanje: pripravljen za uporabo (rabljen), The bottling line includes: (1) Empty bottle depalletizer Kettner Presant Super, year of manufacture: 1990 (2) Rinser Krones Gripstar, year of manufacture: 1991 (3) Filler Krones FKVCF 110, year of manufacture: 1991 (4) Natural corker Bertolaso Delta 416S, year of manufacture: 1991 (5) Cork conveyor (6) Wire hooder Kematec Dratomat 20, year of manufacture: 1991 (7) Depalletizer Schneider EPA 211, year of manufacture: 1991 (8) Depalletizer Schneider EPA 505, year of manufacture: 1991 (9) Capsule applicator Robino Zenith 2-32 Otticoo, year of manufacture: 1991 (10) Labelling machine Krones Solomatik 20-8-4, year of manufacture: 1982 (11) Case packer Kettner Robot BE3/CT, year of manufacture: 1990 (12) Paternoster for carton transport (13) 2x Carton erector Kettner KAF 2400 F, year of manufacture: 1996 (14) Capper Kettner HD 2500, year of manufacture: 1990 (15) Palletizer Kettner Pressant Universal, year of manufacture: 1990 (16) Binder Born HB R 240/430, year of manufacture: 1990 (17) Pallet roller conveyor (18) Roller conveyor, output capacity: 18,000 bottles/h, with documentation, suitable for sparkling wine bottles. The line has been out of operation for ten years. Dedpfx Afjk Nm Nrsljkr

Stanje: rabljeno, Leto izdelave: 2011, x-way 835 mm y-way 510 mm Dodpfex R Em Djx Aflskr z-way 510 mm Distance spindle nose to table 120 - 630 mm Control iTNC 530 ERGOLine Heidenhain Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 130 / 87 Nm Clamping surface of table 1,000 x 560 mm Max. table load 800 kg Number of T-slots 5 T-slots - width 14 mm T-slots - distance 100 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diam. with empty adjacent box 130 mm Max. tool length 250 mm Max. tool weight 6.0 kg Rapid traverse ( X / Y / Z ) 30 m/min Feed rate 1 - 20,000 mm/min Total power requirement 23 kVA Machine weight approx. 4.0 t Required space approx. 4.5 x 3.5 x 2.7 m CNC vertical machining centre DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, STORK VS 24/8 Monoblock Filling Machine after a complete overhaul carried out by the professional company Z.M. ROBAK. The machine is practically free of any signs of use; the protective foil is still present on the casing. The machine was most recently configured for filling glass containers and was used for trial filling of alcohol. Number of filling valves: 24 pcs (with light vacuum for still beverages) Number of capping heads: 8 (adapted for aluminum screw caps) Capacity: approx. 7,000 bph (700 ml) Possible use of bottles with the following dimensions (after format adjustment): - diameter: Ø 45 – Ø 110 mm - height: 105 – 400 mm - standard neck diameter: Ø 28 mm - optional neck diameter range (format change): Ø 18 – Ø 43 mm Machine dimensions: - width: 2,900 mm - height: 2,200 mm - depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – not used in production since modernization Condition: machine is practically unused. The machine comes with original electrical documentation. Dkedpfou Nhiqjx Aflsr

Stanje: novo, Leto izdelave: 2025, Bandwidth: max. 38 mm Dodpfx Afs Ea U Hjljkr Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Available with mechanical control valve by default, or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.