Balirne stiskalnice nakup rabljenega (199)

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 1.932 h, Funkcionalnost: popolnoma funkcionalen, Baling Press Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tip device Technical Data: Manufacturer: Presto Model: CC 50 M Year of Manufacture: 2015 Ljdpex Uz Daofx Abberg Operating Hours: 1932 Pressing Force: 50 t Cycle Time: 52 s Drive Power: 7.5 kW Filling Opening: 1030 x 1100 mm Filling Volume: 0.85 m³ Tying: triple, wire, manual Throughput Rate at Bulk Density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale Dimensions: 750 x 1100 mm Bale Weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine Weight: approx. 4000 kg Materials: Paper, Cardboard, Film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us at 28816 Stuhr. The video can be found on our website or on our YouTube channel. Viewings, including under power, are possible at any time by arrangement. Upon request, we can also carry out tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the details provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Viewing by arrangement. Sale is ex works, pre-payment required, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2014, obratovalne ure: 7.145 h, Funkcionalnost: popolnoma funkcionalen, Baler Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Filling Opening: 1600 x 650 mm (L x W) Channel Cross-section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Capacity at Lodpfx Ajx Uzzxjbborg 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: Blades, counter-blades, and all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The operating manual and CE declaration are available. Inspections – also while powered – are possible by prior arrangement at any time. On request, we can also perform tests with your materials for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 8:00 am to 2:00 pm, and on Friday from 8:00 am to 1:00 pm. Please note: All technical data are based on manufacturer’s information. We accept no liability for any errors or omissions in these details. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2016, Bale Press Avermann, Type AVOS 1410 BR5 – 45/80, Pressing Force 80 t, Year of Manufacture 2016 Technical Specifications: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Filling opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10850 x 2400 x 3800 mm (LxWxH) Machine weight: approx. 18,000 kg Ledpfx Asx Uzy Uebberg Remarks: The press is still in operation and can be inspected upon request. It is expected to be available from the end of February 2026. A suitable WESTERIA conveyor belt is available as an option. The main cylinder was renewed in November 2025. Additional photos available on request. Please contact us for more information. Please note: All technical data are based on the manufacturer’s information. We assume no liability for the details provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex-works, by advance payment, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.022 h, Funkcionalnost: popolnoma funkcionalen, Bale Press Presto CC 20 M, Year of manufacture 2019, Pressing force 20 t, with retention device. Lredex Uzynspfx Abbog Technical Data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 3-fold, manual Throughput at bulk density of: 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: Paper, cardboard, film Remarks: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found on our website or our YouTube channel. Inspections under power are possible at any time by appointment. Upon request, we can also carry out tests with your materials for a fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, you can reach us from 08:00 to 13:00. Please note: All technical data is based on the manufacturer’s specifications. We do not accept liability for the information provided or for possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. The sale is made ex-works, without warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 1.640 h, Funkcionalnost: popolnoma funkcionalen, Baler Presto CC 40 M Lredpfjx Uzxkjx Abbsg Technical Data: Manufacturer: Presto Model: CC 40 M Year of Manufacture: 2017 Pressing Force: 40 t Cycle Time: 34 s Drive Power: 15 kW Feed Opening: 1080 x 1100 mm Feed Volume: 0.85 m³ Tying: 4-fold, polyester strap, manual Throughput capacity at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale Dimensions: 750 x 1100 mm Bale Weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine Weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Operating manual and EC Declaration of Conformity are included. Note: Channel discharge is fully automatic and adjustable. Viewing, including under power, is possible at any time by appointment. On request, we can also carry out tests with your material for a service fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We do not accept any liability for the information provided or any possible errors. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Viewings are possible by appointment. Sale is ex works with advance payment, without warranty or guarantee.

Stanje: delavnici obnovljeno (rabljeno), dolžina bale: 1.200 mm, širina bale: 700 mm, višina bale: 800 mm, teža bale: 380 kg, Stiskalnica v idealnem stanju po obnovi, neuporabljena. Servisirana izključno pri proizvajalcu. Popolno stanje. Popolnoma avtomatsko delovanje. Nastavljiva dolžina bala 600-1200 mm. Teža bale cca 380 kg. Lsdpfxsx S Sbdj Abborg

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 28.155 h, Funkcionalnost: popolnoma funkcionalen, Bale Press Paal Konti 200 D, year of manufacture 2000, optionally available with matching conveyor Paal KEM-1400 Technical Data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 4-fold automatic Throughput at: Lodpox Tflfsfx Abberg 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The press is in good condition and has been checked and tested. A video can be found on our website or YouTube channel. Complete documentation available. Please note: All technical data are based on the manufacturer’s information. We assume no liability for the specifications provided or for any possible errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 62.058 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 099314, širina bale: 770 mm, višina bale: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum throughput: 25,000 kg/h Ledpst Ucqfofx Abberg Bale discharge dimensions: 77 cm x 52 cm The baler is operational – it was in use until the production line was shut down. Recently, there was an issue with the automatic tying system.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, stiskalna sila: 40 t, Proizvajalec: HSM Tip: HL 4010 Ledpfx Abex D U N Ssborg Leto izdelave: 2012

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, širina odprtine za polnjenje: 1.060 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 23.000 kg, raven hrupa: 85 dB, moč: 37 kW (50,31 KM), Rabljeni BOA 2060 naprodaj. Stroj se trenutno nahaja v skladišču v Belgiji. Stroj je bil vedno v pogonu in je trenutno odklopljen. Stroj se prodaja v trenutnem stanju, na zahtevo pa je možna tudi prenova stroja. Tehnični podatki: Pogon: 37 kW Pritisk: 70 ton Ledpfxsya Uwpe Abbjrg Dimenzije bale: 1100 x 720 mm Število žic: 4 navpično, 2 vodoravno Dimenzije lijaka: 1500 x 1060 mm Teža bale: približno 500 kg (odvisno od materiala) Kapaciteta: do 14 ton na uro (odvisno od materiala) Transportna teža balirke: 23.000 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, Technical Data of the Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours (as of December 2025) Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: • 1 MACPRESSE baler, model 111A • 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams Notes: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank fully drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism • Replacement of the front two main running rollers Lrjdpfxex Dnb Uo Abbjg • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate • Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains lubricated and tensioned • All wire deflection rollers overhauled • All door contact switches replaced • Wirbulator dismantled, disassembled, and overhauled • General maintenance work performed Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine. Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 15 t, širina bale: 700 mm, višina bale: 700 mm, teža bale: 220 kg, vhodna napetost: 400 V, moč: 4 kW (5,44 KM), lastna masa: 2.700 kg, Manufacturer: Borg Baling Company Model: S-15KK Year of manufacture: 2002 3x400V, 4kW, 14.5A Pressing force: 15 t Net weight: 2.7 t Max. bale dimensions: 700 x 700 x 1000 mm Ledpfx Abeh Dy Rfjborg Wide selection of used machinery and industrial equipment

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed. Lredpfx Aboic Rl Dobeg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced Lrodpfex A U Ncex Abbjg • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: dober (rabljeno), Leto izdelave: 2006, Zaboj za stiskanje odpadkov, stiskalnica za odpadke, stiskalni zaboj, zabojnik za odpadke, samo-stiskalni zaboj, stiskalnica za odpadke, zabojnik za stiskanje papirja, zabojnik za papir, omarna stiskalnica, vertikalna balirna stiskalnica -Proizvajalec: Bramidan, omarna stiskalnica vertikalna balirna stiskalnica -Tip: 4-0 S50 KBP PES243768-2 -Moč pogonskega motorja: 5,5 kW -Pritisna sila: 50 t -Otvor za polnjenje: ŠxV 1350 x 760 mm -Naprava za izmet bal: dimenzija bala 1200x800x1100 mm -Transportne mere: 1400/2040/V2880 mm (stiskalnico je možno za transport položiti) Ljdpfexnb Nyex Abbjrg -Teža: 2750 kg

Stanje: dober (rabljeno), Leto izdelave: 2001, Stiskalni kontejner za odpadke, stiskalnica za odpadke, press kontejner, kontejner za smeti, samo-stiskalni kontejner, stiskalnica za odpadke, stiskalni kontejner za papir, kontejner za papir, omarna stiskalnica, vertikalna balirna stiskalnica Lodpjxg Dp Tefx Abborg -Proizvajalec: Husmann, omarna stiskalnica vertikalna balirna stiskalnica -Tip: KBP 20 -Pogon: 3 kW -Prisilna moč tiska: 20 t -Polnilna odprtina: ŠxV 1250 x 680 mm -Izmet bal: Dimenzija bala 1200x950x850 mm -Transportne mere: 1450/1160/V2980 mm -Teža: 1300 kg

Stanje: dober (rabljeno), Stiskalni kontejner za odpadke, stiskalnica za odpadke, kontejner s prešo, kontejner za odpadke, samo-stiskalni kontejner, preša za odpadke, stiskalni kontejner za papir, kontejner za papir, omarna preša, vertikalna balažna preša -Proizvajalec: DIXI, omarna preša/vertikalna balažna preša -Tip: 15 S -Pogonska moč: 4 kW -Stiskalna sila: t -Notranje mere: 1100x690x1370 mm -Transportne mere: 1540/950/H1970 mm -Teža: 834 kg Ljdpfoxwuilex Abborg

Stanje: dober (rabljeno), Leto izdelave: 1992, Valjčni kompresor, pakirna postaja, smetarski stiskalni zabojnik, stiskalnica za odpadke, zabojnik za stiskanje, zabojnik za odpadke, samo-stiskalni zabojnik, stiskalnica za odpadke, zabojnik za papir s stiskalnico, zabojnik za papir, omarna stiskalnica, vertikalna balirna stiskalnica, drobilnik kartona, stiskalnica bal papirja, rotacijski kompresor odpadkov -Proizvajalec: Bergmann, stiskalnica bal papirja -Tip: PS 8100-38 -Stiskalec odpadkov: z rotacijsko stiskalno enoto -Prednost: Možno neprekinjeno polnjenje -Pogon: 2,02 kW -Otvor za polnjenje: 1190/990/H670 mm -Volumen bala: 1 m³ Lodpfx Aoxrpi Asbberg -Transportne mere: 1600/1200/H2200 mm -Teža: 898 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours (as of August 2025) Pressing Force, Main Press: 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Motor Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Rates: - Bulk density 20 kg/m³: up to 6 t/hour, depending on material Ljdpfx Absvtpq Hjborg - Bulk density 50 kg/m³: up to 13 t/hour, depending on material Bale Weight: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Control Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Oil Type: HVI 46 Machine Dimensions with Bale Chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire reel boxes for 8 pieces of 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right side and can be folded down to the rear for transport. The baler has been partially overhauled and tested in our workshop—see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment possible. We assume no liability for technical specifications or potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 59 t, širina odprtine za polnjenje: 1.190 mm, dolžina polnilne odprtine: 400 mm, dolžina bale: 1.180 mm, širina bale: 700 mm, višina bale: 800 mm, teža bale: 350 kg, skupna širina: 1.059 mm, skupna višina: 2.871 mm, skupna dolžina: 1.838 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 16 A, skupna masa: 2.300 kg, trajanje garancije: 6 meseci, transportna višina: 2.050 mm, moč: 4 kW (5,44 KM), leto zadnje generalne obnove: 2025, transportna širina: 1.059 mm, transportna dolžina: 1.838 mm, vrsta zaščite (IP koda): IP54, vhodna frekvenca: 50 Hz, hod: 890 mm, Oprema: dokumentacija / priročnik, Znamka: Strautmann Umwelttechnik GmbH Navedena cena je brez zakonskega DDV, iz tovarne in brez embalaže. Stiskalnica je očiščena, funkcionalno preverjena, popravljena in opremljena z novo krmilno enoto v skladu z EN16500. Vsi uporabljeni rezervni deli so originalni deli proizvajalca Strautmann. Tehnične podrobnosti: Lrjdewq Ifvepfx Abbsg Proizvajalec: Strautmann Umwelttechnik Tip: PP 1207 Oblika bala (DxŠxV): 1180 x 700 x 800 mm Zunanje mere (DxŠxV): 1838 x 1059 x 2871 mm Transportna višina: 2050 mm Polnilna odprtina: 1190 x 400 mm Pritisk stiskanja: 59 t / 580 kN Zmogljivost: 1 - 2 bale / uro Število vezalnih kanalov: 4 Teža stiskalnice: 2.300 kg Napajanje: 400 V / 50 Hz Priključna moč: 4 kW Lokacija postavitve: notranja / pokrita zunanja Vključno s start setom balirnih trakov, 19 mm Letnik: 2002

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 13.284 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 140 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.500 kg, kapaciteta rezervoarja za olje: 2.600 l, Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 140 Year of manufacture: 2017 Operating hours: 13,284 hours (as of October 2025) Main ram pressing force: 140 t (max. 153.5 t) Pre-pressing force: 70 t Feed hopper dimensions: 1,600 x 1,100 mm (L x W) Filling volume per cycle: 4.34 m³ Theoretical cycle time: 16 seconds Bale dimensions: 1,100 x 1,100 mm (W x H), variable length Drive power: 2 x 75 kW Total connected load: 209 kW Tying: 5-fold vertical, fully automatic Throughput performance at a bulk weight of: - 30 kg/m³ approx. 30 t/h - 50 kg/m³ approx. 46 t/h - 100 kg/m³ approx. 82 t/h Bale weights: 850 to 1,500 kg Hydraulic oil: 2,600 l Univis N46 Installed dimensions with hopper and conveyor: 13,200 x 24,200 x 7,333 mm (L x W x H) Transport dimensions (press only): 13,302 x 2,884 x 3,539 mm (L x W x H) Machine weight (press): approx. 51,810 kg Technical Data – Feed and incline conveyor with swan-neck: Manufacturer: Bollegraaf Model: HBT 1216/1800 * 23.300 30°/15° Year of manufacture: 2017 Drive power: 7.5 kW Feed belt length: 6,750 mm Incline belt length: 14,400 mm Swan-neck length: 2,150 mm Incline: 30° Usable belt width: 1,754 mm Sidewall height feed belt: 500 mm Sidewall height incline belt: 800 mm Transport dimensions feed belt with one incline segment: 9,816 x 2,500 x 2,242 mm (L x W x H) Transport dimensions incline belt with swan-neck: 13,472 x 2,800 x 2,729 mm (L x W x H) Pit dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Condition: Lrjdpexpxhvofx Abbeg The baler is in very good, immediately ready-to-use condition. See the function video for details. The conveyor belt chain should be replaced. The system will remain in operation until December 2025. Scope of delivery: Baler with conveyor, maintenance platform, access ladder, two wire feed stations for five wire coils each (without wire), and bale chute. Notes: Complete documentation (operation manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. We accept no liability for technical data or possible errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Excellent! Functionality checked. FLITS Rental & Sales service: with every machine we supply a bundle of tying wire (120 wires). Need additional tying wire bundles? Request a free quote. Lrsdpfx Absyap I Aobeg At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you receive the right machine quickly. You are very welcome to view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to inform you properly and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Stanje: zelo dobro (rabljeno), Model: Balirni stroj HSM V-press 1160 plus Pritisna sila (kN): 59 Učinkovitost (bale/uro): 1-2 Maks. dimenzija bale (mm): 1200x1100x1000-1200 Dimenzije (D x Š x V) (mm): 1780x1150x2985 Moč (kW): 4 kW Lrodpfxev Al Tis Abbog Teža (kg): 2300 Leto izdelave: 2018-2019

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Materials to be compacted: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, Styrofoam HSM V-Press 860 Plus Baler, year 2013-2015, price: €7,500 HSM V-Press 860 L Baler, year 2015, price: €9,000 HSM V-Press 860 Plus Baler, year 2019, price: €9,000 HSM V-Press 860, new, ex-demo unit, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical Data: Dimensions (L x W x H, mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle (sec): 35 Pressing force (t): 54 Power supply (V): 400 (three phase) HSM V-Press 860 Plus B Baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V / 50 Hz Power: 4 kW Feed opening width x height: 1500 x 651 mm Bale length x width x height: 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Dimensions (W x D x H): 2099 x 1245 x 2985 mm Weight: 2336 kg Lrodpjra Rbgjfx Abbjg Binding material: wire Materials to be compacted: film, cardboard Idle cycle time: 25 s

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Brand: DIXI Model: 60 Sh Year of manufacture: 2012 Pressing force: 60t Voltage: 400V Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm wide x 80 cm deep x 55 cm high Condition: Very good! Fully checked for functionality. FLITS Rental & Sales service: with every machine, we deliver a bundle of binding wire (120 wires). Need more bundles of binding wire? Request a free quote without obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for businesses and private customers. We focus on delivering efficient solutions in internal transport, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for use in various sectors. Also check out our listings for: waste balers for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubber dryers for thorough and professional floor cleaning, forklifts in different configurations suitable for various working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you have the right machine as quickly as possible. Visit our location Lsdpfxjx Ux Hxo Abbjrg You are welcome to visit our site to view the machines. Our address is: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so that we can take the time to properly inform you and show you the right machines. Contact Do you have questions or would you like to receive a non-binding quote? Please feel free to contact us: We are happy to assist you. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI