Bollegraaf HBC140s (2x75kW)

Bollegraaf HBC 140

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 13.284 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 140 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.500 kg, kapaciteta rezervoarja za olje: 2.600 l, Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 140 Year of manufacture: 2017 Operating hours: 13,284 hours (as of October 2025) Main ram pressing force: 140 t (max. 153.5 t) Pre-pressing force: 70 t Feed hopper dimensions: 1,600 x 1,100 mm (L x W) Filling volume per cycle: 4.34 m³ Theoretical cycle time: 16 seconds Bale dimensions: 1,100 x 1,100 mm (W x H), variable length Drive power: 2 x 75 kW Total connected load: 209 kW Tying: 5-fold vertical, fully automatic Throughput performance at a bulk weight of: - 30 kg/m³ approx. 30 t/h - 50 kg/m³ approx. 46 t/h - 100 kg/m³ approx. 82 t/h Bale weights: 850 to 1,500 kg Hydraulic oil: 2,600 l Univis N46 Installed dimensions with hopper and conveyor: 13,200 x 24,200 x 7,333 mm (L x W x H) Transport dimensions (press only): 13,302 x 2,884 x 3,539 mm (L x W x H) Machine weight (press): approx. 51,810 kg Technical Data – Feed and incline conveyor with swan-neck: Manufacturer: Bollegraaf Model: HBT 1216/1800 * 23.300 30°/15° Year of manufacture: 2017 Drive power: 7.5 kW Feed belt length: 6,750 mm Incline belt length: 14,400 mm Swan-neck length: 2,150 mm Incline: 30° Usable belt width: 1,754 mm Sidewall height feed belt: 500 mm Sidewall height incline belt: 800 mm Transport dimensions feed belt with one incline segment: 9,816 x 2,500 x 2,242 mm (L x W x H) Transport dimensions incline belt with swan-neck: 13,472 x 2,800 x 2,729 mm (L x W x H) Pit dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Kwjdpexpxhvsfx Abbst Condition: The baler is in very good, immediately ready-to-use condition. See the function video for details. The conveyor belt chain should be replaced. The system will remain in operation until December 2025. Scope of delivery: Baler with conveyor, maintenance platform, access ladder, two wire feed stations for five wire coils each (without wire), and bale chute. Notes: Complete documentation (operation manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. We accept no liability for technical data or possible errors.

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Kjdpou Nw Ezefx Abbewt Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 19.187 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 140 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.500 kg, skupna masa: 52.000 kg, Technical Data - Baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 140 Year of manufacture: 2017 Operating hours: 19,187 hours (as of October 2025) Main press force: 140 t (max. 153.5 t) Kwjdpoxrta Eefx Abbot Pre-press force: 70 t Feed opening dimensions: 1,600 x 1,100 mm Filling volume per cycle: 4.34 m³ Theoretical cycle time: 16 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 75 kW Connected load: 226 kW Total current consumption: 428 A Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: - 30 kg/m³: approx. 30 t/h - 50 kg/m³: approx. 46 t/h - 100 kg/m³: approx. 82 t/h Bale weights: 800 to 1,500 kg, depending on material and bale length PLC control (manufacturer, type): Telemecanique TSX Micro Operator panel (manufacturer, type): Schneider MAGELIS Touch Installed dimensions with hopper and conveyor: 13,200 x 27,000 x 7,333 mm (L x W x H) Transport dimensions (baler only): 13,200 x 2,750 x 3,450 mm (L x W x H) Approximate machine weight (baler): 52 t Technical Data - Conveyor: Manufacturer: Bollegraaf Model: HBT 1216 Year of manufacture: 2017 Drive power: 7.5 kW Feed belt length: 6,750 mm Inclined belt length: 14,400 mm Gooseneck length: 2,150 mm Incline angle: 30° Usable width: 1,754 mm Side wall height (feed belt): 500 mm Side wall height (inclined belt): 800 mm Weight: 16 t Pit dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Notes: The baler is currently in operation and is scheduled to be replaced by a new machine in Q2 2026. Inspections can be arranged upon request. No liability is assumed for the technical specifications or any potential errors.

Leto izdelave: 2008, obratovalne ure: 40.000 h, Stanje: dober (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2008 (00191), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Balenpers: Gewicht: 47.100 kg Bouwjaar: 2008 Hardox bodemplaat alleen Variabele kanaaldrukregeling Kunststof ventiel Hydraulische pomp aangedreven door frequentieregelaar Anti-ratten bekabeling Dieptefiltratie van olie Modem Draaiuren: 40.000 Deze pers kan ook volledig gereviseerd geleverd worden volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de balenpers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Spelingen Na demontage worden de toleranties van alle stalen onderdelen gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende componenten: • Perswagen (ram), • Frame, • Kanaal, • Voordruk-klep (pre-press-flap) Na demontage en inspectie wordt de perswagen opnieuw opgelast en voorzien van nieuwe perswielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. Kwsdjkcgf Hepfx Abbet De hydrauliekleidingen en slangen worden vervangen. Hydraulische componenten worden herverpakt. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden herverpakt en indien nodig voorzien van een nieuwe chroomlaag of nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (human interface) worden vervangen door de nieuwste Schneider M340 versie inclusief de nieuwste software.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed Ksdovwlqqspfx Abbewt - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2003, obratovalne ure: 43.000 h, Stanje: potreben popravila (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Hardox bodemvloerplaat uitsluitend Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze pers kan tevens volledig gereviseerd worden verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Hierbij geldt een garantie van 2 jaar. Neem contact met ons op voor meer informatie of een vrijblijvende offerte. Algemene principes van revisie Reiniging & demontage Voordat de revisie daadwerkelijk plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten nagemeten en waar nodig opnieuw gelast. Dit geldt in elk geval voor de volgende onderdelen: • Aanpersplaat (ram) • Frame • Kanaal • Voorpersklep Kwodpfokcgynox Abbet Na demontage en inspectie wordt de ram opgelegd en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden waar nodig uitgedeukt en gerepareerd. Overspuiten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen & slangen worden vervangen. De hydraulische componenten worden voorzien van nieuwe pakkingen. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en waar nodig vervangen. Alle aansluitdozen worden vervangen en gemonteerd op goed toegankelijke locaties. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw verpakt en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast: De schakelkast wordt gecontroleerd en gereinigd. Waar nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieninterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Leto izdelave: 2022, obratovalne ure: 20 h, Stanje: kot nova (razstavni stroj),

Leto izdelave: 2024, Stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each Kwjdpfx Aboff Sbiebjt from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): approx. 1.9 x 2.6 x 1.0 m Machine transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Number of bending formers: 2 pcs. Bending angles: 40°, 60°, 75° Bar diameter: angle form = Ø 12 - 50 mm, double angle = Ø 12 - 35 mm Kwsdju Ibu Ropfx Abbet Operation via control panel with touch screen Bending plate: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Pin holes: Ø 48 mm (16 pcs.) - Center pin: Ø 50 x 94 mm Stop bars: - 2 pcs., length: 840 mm - Manual adjustment: 100 mm - 13 holes, Ø 48 mm Accessories: Bending formers: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for bending plate 8x counterholders (various forms) 1x bending tray

Leto izdelave: 2021, Stanje: novo, Enoglava rezalna žaga OMC RONDA 700, nova Stroj na zalogi - žagin list premera 700 mm Ksdpfx Ajhrukisbbswt - hidro-pnevmatsko podajanje - pnevmatski nagib na obe strani, s fiksnimi kotnimi nastavitvami 22,5° - 45° - 90°. Za vmesne kote z ročnim mehanskim omejilcem - 2 navpična in 2 vodoravna prijemala - sistem mazanja lista s pršilno meglico - popolna pnevmatska zaščita