Visoko zmogljiva balirka, hidravlična stiskalnica za odpadno embalažo, stiskalnica za reciklirani de

MACFAB - BEMA 650A

Stanje: zelo dobro (rabljeno), Kataloška številka 6726 TEHNIČNI PODATKI - Vhod lijaka za polnjenje: 280x300mm - Izhod za zdrobljen les: premer 310mm - Delovna širina rotorja: 340mm - Glavni motor: 22kW Dcedpfx Apsignt Ueleg - Število nožev: 6 kosov - Dimenzije (d/š/v): 1300x1150x1680mm - Teža: 720kg PREDNOSTI – Zelo dobro stanje – Rabljen sekalnik Neto cena: 19.900 PLN Neto cena: 4.740 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih valutnih nihanjih se cena lahko spremeni)

Stanje: novo,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Dcjdpjp Audqsfx Aplsg Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.800 mm, skupna višina: 2.000 mm, skupna dolžina: 1.600 mm, skupna masa: 3.000 kg, Toto je zcela nový stroj, který je ihned k dispozici. Dcodpfxsukfvps Aplog

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. Dodpfxsg Ey Ufs Aplocg *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Arburg injection molding machine from 2000. 130 tons clamping force. The machine is delivered fully reconditioned at our facility in Heras (Cantabria). New seals installed in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm DISTANCE BETWEEN TIE BARS: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ INJECTION SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar Dcedpforxtpdsx Apljg

Stanje: novo, Leto izdelave: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min, max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank volume: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level control - Indirect cooling system (shell-and-tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass Dodpfx Aoddv Iteplscg - Solenoid valves for cooling Electrics and controls: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Connection cable with plug Available in approx. 4 weeks!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.108 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, premer vijaka: 25 mm, delovna prostornina: 79 cm³, tlak vbrizgavanja: 2.398 letvica, izmetalna sila: 6.100 N, hod izmetalca: 100 mm, odmični hod: 606 mm, dolžina plošče: 750 mm, širina plošče: 850 mm, skupna masa: 10.600 kg, Oprema: dokumentacija / priročnik, Tehnične podrobnosti Proizvajalec: Engel Model: V 330H/80V/130 Combi Cleanroom Dcsdpfx Ast A Ui Aepleg Leto izdelave: 2006 Obratovalne ure: 33.107 h Polži: 25/22 mm Teža stroja: 10.600 kg Vključena dodatna oprema: Robot GEKU SR 500 ST Zaščitna kletka Vrtljiva miza Stroj je deloval približno 33.107 ur v avtomatskem načinu.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 58.001 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 25 mm, delovna prostornina: 59 cm³, tlak vbrizgavanja: 20 letvica, minimalna višina orodja: 250 mm, izmetalna sila: 25 N, hod izmetalca: 100 mm, skupna masa: 3.900 kg, Oprema: dokumentacija / priročnik, Engel E Max čistilni stroj, letnik 2008, vključno z linearnim robotom GEKU SR 500 ST. Stroj ima skoraj 58.000 ur delovanja v avtomatskem načinu. Stroj prihaja od priznanega proizvajalca iz farmacevtske industrije, zato je bil tako stroj kot rokovanje podvrženo zelo strogemu vzdrževalnemu režimu in sta v odličnem stanju. Dcsdpfx Aet A Ufwspljg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Vertical Baler is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing bulky items like used tires and car bumpers to a minimum volume. The baler stands out for its user-friendly and safe operation, as well as its large feed opening, making it perfectly suited for medium to high material volumes. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and efficiently return the material to the recycling process. Technical Specifications: Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Pressing cycle: 40 seconds Motor: 5.5 kW, 16 Amps Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Key Features: - Extra-long twin cylinders for consistent and early compaction - User-friendly lever control - Bale ejector for easy bale removal - Additional retainer to minimize material spring-back - Holder for 4 rolls of strapping band - High-quality product "Made in Europe" Dcsdpfx Apevug Eksljg Suitable for compacting: - PET bottles - Food cans and metal containers - Plastic canisters and packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Optional Features: - Annual maintenance including safety inspection (UVV) - Machine color according to RAL - PLC control with automatic press cycle, bale-ready indicator, and key-operated emergency stop - Vertical door - Strapping bands/wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baler. Used as: can baler, can press, PET baler, PET press, tire baler, tire press, waste baler, cardboard baler, film baler, paper baler, refuse baler, recycling press, waste compactor, general waste baler.