Enota za temperaturno hlajenje (TCU)
Single Variotherm ATT H2-200-48

Name: Single Variotherm ATT H2-200-48
Brand: Single
Availability: InStock

Stanje

Novo

Lokacija

Hochdorf

Enota za temperaturno hlajenje (TCU) Single Variotherm ATT H2-200-48

Podatki o stroju

Oznaka stroja:: Enota za temperaturno hlajenje (TCU)

Proizvajalec:: Single

Model:: Variotherm ATT H2-200-48

Stanje:: novo

Cena in lokacija

najem:: je mogoče

Lokacija:: Ostring 17-19, 73269 Hochdorf, Deutschland

Pokliči

Podrobnosti ponudbe

ID oglasa:: A6050788

Referenčna številka:: ATT H2-200-48

Posodobitev:: nazadnje dne 21.11.2024

Opis

*TECHNICAL SPECIFICATION:
Heating capacity, hot circuit: 48 kW
Heating capacity, cold circuit: 12 kW
Cooling capacity, hot circuit: 42 kW
Cooling capacity, cold circuit: 270 kW
Medium: Water up to 200°C
Maximum external volume: 10 liters at 200°C

Max. flow rate: up to 200 l/min
Max. delivery pressure: up to 6.5 bar
Motor power: 5.5 kW
Dimensions (LxWxH): 1,395 x 753 x 1,180 mm
Weight: approx. 580 kg

*EQUIPMENT HIGHLIGHTS:
- Control and operation via PLC with touch screen
- Heating with stainless steel tubular heaters made of Incolloy
- Heater control via solid-state relays
- Control cabinet IP54, externally ventilated
- Electrical wiring on terminal blocks
- Volt-free input for signal to switch between heating/cooling (front door)
- Volt-free contact for collective alarm via 3-pin connector (front door)

- Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits
- Temperature-controlled feed of return water
- Level monitoring with automatic level compensation
- Dirt filters in cooling water inlet and in return line of the circulation system
- Separate automatic filling with strainer
- Flow measurement using differential pressure principle in both circuits
- Monitoring of heating element surface by temperature sensor
- System pressure regulation, required compressed air connection: 6 to 8 bar
- Pressure boosting pump type DS 360 for make-up water
- Corrosion-resistant components (stainless steel, brass)
- Unit mounted on castors and ready for connection

*OPTIONS:
- EcoTemp system for intermittent operation
- Connection for external temperature sensor PT100 or type J/K
- Remote touch screen with 15 m cable
Dcsdpfx Anjg Ey Ufsrjk

Visit our website for more details or for alternative performance classes.

*This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2020

8 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 7153 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Enota za temperaturno hlajenje (TCU) / hladilnik Single Chill Plus Testing CHT-130

Hochdorf

502 km

Enota za temperaturno hlajenje (TCU) / hladilnik
SingleChill Plus Testing CHT-130

Pokliči

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) Dcodpfxjg Ezarj Anrok - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Poglej podrobnosti

Mali oglas

Stroj za brizganje KraussMaffei KM 850-12000 MX

Wrocław

566 km

Stroj za brizganje
KraussMaffeiKM 850-12000 MX

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN Dcodpfxstrya Rs Anrok - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Poglej podrobnosti

Mali oglas

Stroj za pilotiranje AJCE AVH30 Sheet Pile Vibro Hammer Pile Driver

Dordrecht

980 km

Stroj za pilotiranje
AJCEAVH30 Sheet Pile Vibro Hammer Pile Driver

Pokliči

Stanje: novo, Leto izdelave: 2025, Teža Lastna teža: 1.800 kg Funkcionalnost CE oznaka: da Stanje Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dsdpfoq Ixuvjx Anreck Identifikacija Referenčna številka: 2 Dodatne informacije Primerno za naslednje stroje: 20-35 ton Pogoji dobave: EXW Država proizvodnje: KR Dodatne informacije Za več informacij kontaktirajte Ö. Inalkac.

Poglej podrobnosti

Mali oglas

Hladilnik, hladilnik Hitema ENR 075 Prozess Kaltwassersatz

Güglingen

555 km

Hladilnik, hladilnik
Hitema ENR 075 Prozess Kaltwassersatz

23.900 €

Fiksna cena plus DDV

Pokliči

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), air-cooled process chiller: Refrigerant R32 Cooling capacity 72 kW at 7/12°C, internal P3 pump, integrated 410 l buffer tank, winter package for outdoor installation rated for ambient temperatures down to -25°C, includes variable-speed fans Dodpfxef H A Eyo Anreck generous Dixell display with protective cover,

Poglej podrobnosti

Mali oglas

Arburg Allrounder 420C 1000/150/60 2K Arburg 420C 1000/150/60 2K

Cantabria

1.511 km

Arburg Allrounder 420C 1000/150/60 2K
Arburg420C 1000/150/60 2K

Pokliči

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Dsdpfx Aop Audqjnrock Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Poglej podrobnosti

Mali oglas

Termo nafte temperature krmilna enota Regoplas RT50

Dn10 4Es

1.392 km

Termo nafte temperature krmilna enota
RegoplasRT50

Pokliči

Mali oglas

Enota za temperaturno hlajenje (TCU) Single Compact WK3-160-9-50 (IM160F)

Hochdorf

502 km

Enota za temperaturno hlajenje (TCU)
SingleCompact WK3-160-9-50 (IM160F)

Pokliči

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. Dodpfx Asftm Hrenrjck *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Poglej podrobnosti

Mali oglas

Contamine-sur-Arve

667 km

Stroj za prezir
STÄHLIFLM 750

Pokliči

Stanje: rabljeno, TEHNIČNI PODATKI - Plošča - Zunanji premer: 750 [mm] - Notranji premer: 150 - Glavna moč motorja: 4 [kW] - Napajalna napetost: 380 [V] - Skupna pogonska moč: 3,6 [kW] TEŽA IN DIMENZIJE Dsdpfx Ansxb Em Njrjck - Potreben prostor: 1100 x 1700 [mm] - Višina stroja: 2000 [mm] - Teža stroja: 1100 [kg] - Število ur: 5160 [h]

Poglej podrobnosti

Mali oglas

Kabina za barvanje/pršenje Reinox 450x235

Hradec Králové

455 km

Kabina za barvanje/pršenje
Reinox450x235

10.300 €

Fiksna cena plus DDV

Pokliči

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: kabina, Spray / Painting Booth !! Always a brand-new machine (Photos shown are from installations at customer sites). We are the manufacturer. !! The Reinox 450×235 spray booth is the ideal solution for painting large components and for serial production. Thanks to its robust construction, high-performance extraction system, and ATEX certification, safe operation is ensured even in environments with explosion hazards. The booth is equipped with a powerful fan featuring a frequency inverter, allowing smooth adjustment of the extraction rate according to current needs. A three-stage filtration system keeps the workspace clean and ensures a high-quality surface finish. Technical specifications: - Fan certified for ATEX zone 22 - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan: 4 kW (ATEX version) - Extraction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Control: frequency inverter – stepless performance regulation via potentiometer on the control panel. - Filtration: three-stage (dry or water-based version according to requirements) - Certification: CE, ATEX Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us. Djdpfx Anoia Taxsrock

Poglej podrobnosti

Mali oglas