Stroj za brizganje

Arburg Allrounder 470S 1300-350

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. Godpetyyn Hjfx Afqebg 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, 1 used injection moulding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Gbjdpfx Aou Eu Tnofqjg Year of manufacture: 2007 Clamping force: 28 tons Tie bar spacing: TIE-BARLESS Screw diameter: 25 mm Maximum shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull

Leto izdelave: 2020, Stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function Gedpfx Afoflk Awsqebg It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg Gsdpfx Aovambcsfqobg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone a comprehensive partial overhaul in our workshop. Among other things, both the main spindle bearings and the leadscrew/feedshaft bearings have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to inspect on-site. Availability: on request Machine No.: 3595 Year of manufacture: 2001 Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 - 0.888 mm/rev Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions (LxHxW): approx. 2.2 x 1.5 x 1 m Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various chuck jaws... Our service promise to you: - We are a certified master workshop specializing in mechanical engineering. - All machines are thoroughly inspected. - All lubricants and, if necessary, worn parts are replaced in advance. - Upon request, we can carry out a complete or partial overhaul of the machine of your choice. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools directly. Gedpfothd Shex Afqebg - Upon request, we can also install further accessories such as safety equipment, etc. - We are happy to arrange shipping and/or installation for you.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potreba po zraku: 1,13 m³/h, pritisk: 7 letvica, trajanje garancije: 24 meseci, skupna širina: 1.370 mm, skupna višina: 2.080 mm, skupna dolžina: 1.150 mm, skupna masa: 350 kg, Oprema: kabina, osvetlitev, The Vapormatt PUMA is a high-quality, versatile manual wet blasting cabinet manufactured by Vapormatt, the leading company in the wet blasting sector and the inventor of this technology in the 1950s. Developed over more than 70 years of wet blasting innovation, the Vapormatt PUMA offers an ergonomic and efficient solution. The unit features an optional basket for processing small batch parts, as well as a clamping device that allows for the straightforward treatment of rims or wheels. Even large workpieces, weighing up to 125 kg, can be placed on the robust stainless steel grate. For easy handling, an optional stainless steel rotary table is available. The integrated recirculating water system with cascade tank, filtration unit, and return pump ensures economical use of water and media. Wet blasting, thanks to the carrier medium of water, allows for gentler and more uniform surface treatment compared to processes such as sandblasting. With this technology, you can achieve smooth, consistent surfaces on your parts. Technical specifications: - Internal dimensions: 1100 x 1100 x 1200 mm (LxWxH) - External dimensions: 1400 x 1200 x 2100 mm (LxWxH) - Pump power: 2.2 kW (400 V / 50 Hz) - Sump capacity: approx. 142 L water / approx. 15–40 kg blasting media - Max. load on work surface: 125 kg All prices are net plus applicable VAT at the current statutory rate and shipping costs. Images may show the machine with accessories; these are available optionally and subject to additional costs. If you are interested, we look forward to hearing from you. We are happy to provide advice without obligation. Gbsdpfx Aetqmh Ejfqsg The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the initial step, we will send you a non-binding offer, which will also include information about our general terms and conditions, imprint, and right of withdrawal before any purchase or contract is concluded.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Demag Ergotech-System 250/280-80 Gbodpfx Afjhrw Ameqeg Schließkraft 25 t Schnecke 25 mm Baujahr 2003 Angussentnahmeroboter 2 Stück

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 144.381 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Technical data: Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Gsdpeu Uuakofx Afqsbg Transport and loading can be organised Europe-wide for an additional fee if required. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Hohner univerzalna glava za spenjanje 52/8 - 6 obročev - za okroglo žico št. 24 - 26 - z različnimi dodatki po slikah. Stanje glede na fotografijo. Gbsdpfxefc Rx Ts Afqsg