Ekstrudirna linija

Artec 145DV

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 Cgodjiyyf Ijpfx Ahxet 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition Cgedpfx Aheycuuysxst For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Data: • Machine type: ZSK 40 • Screw diameter: 40 mm • Screw length: 7 barrels × 4 D → approx. 28 L/D • Main drive: 34.5 kW • Motor speed: 1,800 rpm • Screw speed: 40 – 400 rpm • Max. torque per screw shaft: 325 Nm • Heating: electric, connection load approx. 17 kW • Cooling: water cooling unit • Temperature control zones: 6 zones • Housing temperature measurement points: 6 • Material temperature measurement point: 1 • Material pressure measurement point: 1 Barrel Configuration: • Feed barrel with liquid addition port • Open barrel with insert and 2 liquid addition ports • Multiple closed barrels with openings for liquid addition or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance due to modular mixing and kneading elements • Modular system for screws and barrels • Drive and process sections mounted on a sturdy base frame Areas of Application: • Plastics compounding • Masterbatch production • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Operating Time: According to the operating hours counter, the machine has run for less than one year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & Customization: Upon request, we offer design and installation of suitable tooling, e.g. strand dies, as well as integration of additional peripheral equipment such as screen changers, pelletizing lines, dosing equipment, or other customer-specific components. The machine can thus be individually configured according to customer requirements and delivered ready for operation.

Stanje: pripravljen za uporabo (rabljen), Rabljeni stroj Brizgalni stroj Proizvajalec: Krauss Maffei KM 80 C1 Letnik: 2000 Cgjdpsu Ti Srsfx Ahxet Na zalogi je le še 1 stroj Ni dobavnega roka, takoj dobavljivo Ogled možen po predhodnem dogovoru Stroj ni več priključen na elektriko / noben priključek za hladilno vodo Stroj je strokovno uskladiščen Tehnični podatki: Zapiralna sila (kN): 800 kN Pritrdilna plošča (mm): 610×610 Razdalja med stebri (mm): Vgradna višina (mm): 250 Odprtina med ploščami (mm): 750 Krmiljenje: MC4 Zaslon v nemškem jeziku (ni mogoče spremeniti v druge jezike) Brizgalna enota Premer polža (mm): 45 Brizgalni tlak (bar): 1878 Prostornina hoda (cm³): 275 Moč pogona črpalke (kW): 18,5 Grejna moč (kW): 13 Polnjenje olja (l): 270 Dimenzije (m): 4,3 x 1,4 x 2,1 Skupna masa: 3,2 t Dodatne fotografije na zahtevo.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Cedpfx Ajvf E Avehxjgt Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Znamka: Reifenhauser Cgsdpfx Asvbcbuohxjt Model: Mirex-MT-V 1-RZE 120-1800 Leto: 2016 Stanje: Odlično Uporaba: PET / PP / PS folija ali plošča PET: Območje debelin: 0,25 – 2,2 mm Izhodna zmogljivost: 2.000 kg/h Največja širina plošče: 1.600 mm Ekstruder: RZE 120 mm Električna napajana: 3 x 480V 60Hz z N Širina kalandrske valjev: 1.800 mm Premeri kalandrske valjev: 450 / 700 / 700 mm Silikonska kopel, največja širina plošče: 1.600 mm Silikonska kopel, območje debelin plošče: 0,15 – 1,5 mm Vključen štiripozicijski navijalec WOB 1800 za navijanje dvojnega traku. Vse informacije so lahko predmet sprememb in/ali napak. Vsa oprema je na voljo do prodaje ali do umika iz prodaje.

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Material throughput: LDPE: 110 kg/h, PA6.0/LDPE/EVOH: 150 kg/h, PP/PA6.0/LDPE/EVOH: 135 kg/h, PA6.0/LDPE: 120 kg/h, EVA/LDPE: 150 kg/h. Rated power: 77 kW, PCU power: 30 kW, extruder power: 18.5 kW, motor power: 10.7 kW, heating zones: 1, heating capacity: 12 kW. Documentation available. On-site inspection is possible. Cgodpfx Ajwty Hkshxet

Leto izdelave: 2007, stanje: zelo dobro (rabljeno),

Stanje: rabljeno, Leto izdelave: 1994, obratovalne ure: 62.058 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 099314, širina bale: 770 mm, višina bale: 520 mm, Proizvajalec: COMDEC - PAAL Model: LV2020PFT Serijska številka: 099314 Leto izdelave: 1994 Csdpfxet Ucqfs Ahxsgt Maksimalna zmogljivost: 25.000 kg/h Dimenzije izhoda bale: 77 cm x 52 cm Stiskalnica je delovala do zaustavitve proizvodne linije.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2013, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2013 The equipment is incomplete and being sold as a parts unit Defects: Codour Ravjpfx Ahxsgt Hydraulic pump missing Control unit missing Power supply missing

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Cgjdpfx Ahshpmawexst Weight: 178 kg