Tračna žaga

MEBA MEBAeco 335 DGA

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 3.430 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7508, Technical data: • Cutting diameter: 335 mm • Saw blade dimensions: 4400 x 34 x 1.1 mm • Feed range: from 5 to 1000 mm per stroke • Cutting area at 90°: flat workpieces 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat workpieces 320 x 335 mm • Round cutting at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat workpieces 170 x 335 mm • Cutting speed: steplessly adjustable from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment of MEBAeco 335 DGA-1000: • Access protection in accordance with CE by light barrier. • Robust two-column linear design of the MEBA bandsaw with automatic material feed system (range 5–1000 mm per stroke). • CNC control enabling easy program input and visualization. • Automatic cutting at any angle from 30° to 135°, with adjustable length and number of pieces. • Capability to create and manage up to 255 cutting programs. • Intuitive data input minimizes operator errors. MEBA High-Performance Package: • Saw feed driven by servo motor and ball screw with automatic monitoring of cutting pressure and feed rate. • Consistent and optimized working conditions for cutting various materials, including thin-walled profiles. • Precise and fast material positioning via AC rack drive with up to 1000 mm stroke length. • Clamping jaw system opens from both sides, equipped with rods for handling heavier materials. Dcedpfow Adg Tsx Afqor Construction and functionality: • Solid saw frame made of welded, vibration-resistant steel. • Saw blade set at a 3° angle relative to the table to increase efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize blade deviation. • Carbide sliding guides for maximum accuracy. • Zero point (mitre rotation) located at the intersection of the blade with the moving clamping jaw, eliminating the need for length correction when changing the angle. • Automatic angle programming via control panel. Vise system: • Patented double angular vise system with automatic position adjustment to cutting angle, ensuring secure and accurate material clamping close to the cutting line. • Clamping performed by full stroke hydraulic cylinders. Additional features: • Automatic lowering of the saw frame in front of the material at the beginning of a cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable bandsaw drive speed controlled by frequency inverter (15–150 m/min). • Precisely pre-machined components eliminate play.

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, Dcsdpfofg E Hnsx Afqjr and a frequency-driven, robust gear motor.

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm Dcodpfx Afoulnb Djqsr - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.12.01, Fresan FP 100P - C-frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Capacity: 100 tons (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and ram: 445 mm * Stroke adjustment: 0 - 132 mm * Ram adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings, grade SnBz-12 * Pneumatic clutch-brake combination * Completely enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * 6-way ram guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted to a standard machine) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: Dcedpfx Aonxh T Rjfqor * Extra clamping plate * Parts ejector (upper and/or lower; mechanical or pneumatic) * Material feed, loading and unloading systems (decoiler, recoiler, straightener, pneumatic or servo feeder) * Customized machine

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm Dedpfoh S Nxpex Afqocr 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical data: Type: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: HYDR (hydraulic) Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. Dcsdpfjg Ufvbjx Afqsr We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!

Stanje: novo, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Size ----- 3770 x 34 x 1.1 mm Saw Speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ---- 290 mm / 250 x 250 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guidance with carbide guides Hydraulic quick-release vice Coolant pump Hydraulic drop-down cylinder Motor overload protection switch Automatic cut-off Dcsdpfx Aoga Tzxjfqer

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Dcsdsfx Hv Hspfx Afqor Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, skupna masa: 22.800 kg, stiskalna sila: 250 t, CNC Press Brake Dcjdpfx Afor Sxq Rjqsr Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Back gauge, Type 2 - Front bending aid (disassembled for transport) - DNC 900PS control system All documentation for the machine is available.

Stanje: dober (rabljeno), Proizvajalec: WEINGARTEN Djdon D Ebajpfx Afqocr Tip: ER 125 Velikost mize: 800x620 mm Na nosilnem delu stiskalnice je vidna majhna razpoka; bila je tako uporabljena leta. !!