Stroj za brušenje zgibne roke

MTM GSM 110

Stanje: dober (rabljeno), Traypacker / Wrap-around-Verpacker Fodpofxypiofx Abtegc Trays und Wrap-around-Kartons Mindestverpackungsgröße L x B x H = 190 x 140 x 80 mm Maximalverpackungsgröße L x B x H = 460 x 350 x 250 mm 4-bahnige Maschine. Die Hotmelt-Anlage wurde 2018 überholt. Siemens S7 SPS-Steuerung, einfacher Formatwechsel. Verkauf im Ist-Zustand oder angepasst an Kundenanforderungen.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Fgedpsd S Uf Sefx Abtsc Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer Fodpfx Abjlat Hdetjgc - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Fgodpfxjrpi E Ao Abtjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Horizontalna peč za konvekcijsko kaljenje stekla. Največje dimenzije stekla: 1500 x 3000 mm Debelina stekla: 4 - 19 mm Napetost: 400 V 50 Hz Krmilna napetost: 230 V AC, 24 V Moč: Fgedpfx Asyw Hgrebtsc Ogrevanje: 296 kW Motorji: 262 kW Skupaj: 558 kW Tok: Ogrevanje: 470 A Motorji: 450 A Skupaj: 920 A

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm Fgjdehlp D Nspfx Abtsc - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Fgjdpfxjqgcdto Abtjc Dimensions: 185 x 180 x 235 cm (LxWxH)

Stanje: novo, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (underside of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for trolley - Drag chain, cable sag approx. 800 mm - Operation from floor using pendant control Fgsdpfsxak Hxjx Abtoc Including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, double-strand - Painted in RAL 5017 traffic blue - Lifting capacity 1 t - Hook travel 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Lifting, 2-speed (pole-switchable) 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching frequency 360 c/h Overload protection The crane system complies with the requirements of Machinery Directive 2006/42/EC as well as current UVV regulations DGUV Regulation 52 (formerly BGV D6). Included: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation anchoring, including grouting accessories For alignment of the slewing jib crane, a mounting gap between the column base and the building floor must be provided. The mounting gap is to be grouted by the customer after approx. 4 weeks of crane operation. Illustration shows a similar crane system.

Stanje: novo, Leto izdelave: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roll Fedpfshgiuhex Abtogc Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Stanje: rabljeno, Leto izdelave: 2008, Screw cap GL 18 Closure for medicine bottle GL18 Fedpfx Abodqbzqstjgc Injection mould with 10 cavities