Enota obračanja plovila

DUMETA D-CHGK-10-D

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Roller diameter 300 x 120 mm Bsdpfxofv A A Ao Acmslh Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components by Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Various track rollers available: steel/rubber/polyurethane • High stability due to robust design • CE certificate • Excellent price-performance ratio • Wired remote control • Double foot pedal • 3-year warranty (see warranty conditions)

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: V020113, obratovalne ure: 43.000 h, AMADA MODEL HFT 8025, hidravlična upogibna stiskalnica s spodnjim hodom, zmogljivost 80 ton x 2500 mm dolžina upogibanja, vključno s CNC krmilnikom, Model: Amada HFT 8025 CNC upogibna stiskalnica s spodnjim hodom Leto izdelave: 2002 Tonska zmogljivost: 80 kN Bedpfx Aeuwktnecmolh Krmiljene osi: Y1, Y2, X, R Maksimalna dolžina upogiba: 2500 mm Odpiralna višina: 470 mm Hitrost približevanja: 100 mm/s Hitrost upogibanja: 1 - 10 mm/s Hitrost povratka: 1 - 100 mm/s Kapaciteta olja: / (navedba ni podana) Moč motorja: 9 kW Teža: 5.750 kg Dolžina mize: 2.500 mm Širina mize: 180 mm Odpiralna višina: 470 mm Globina vratu: 420 mm CNC krmiljenje

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Bsdpfxjd S Uf Ss Acmelh Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) Bledpfshlz R Ssx Acmjh - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Bsdorpi E Aspfx Acmelh

Stanje: novo, Band Saw Machine Bodpfx Acoilg Hdsmolh Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame Bjdpfx Acohpktvomjlh - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 Bodpfov Tpxqox Acmolh - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Stanje: zelo dobro (rabljeno), SCM Compact XL Four-Sided Planer Blodpfx Acolat Hdsmeh - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindle driven by a single motor: 7.5 kW each, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment Bsdpfx Aohlp D Necmslh - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.