Enota obračanja plovila

DUMETA D-CHGK-10-DPU

Stanje: dober (rabljeno), Unit: REWA chamber filter press, used Type: 470-15-25K-HP Design: side-bar guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the specific medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): Flange, tie rods stainless steel, PP or rubber-lined Dodpfx Apsqakbrolout Material (non-product-contacting parts): Stainless steel Purchase or rental: Inspection of the equipment can be arranged by appointment at our facility. Other information: We supply this unit used, fully functional or refurbished and customized to your requirements. Are you interested in renting or purchasing this unit? Contact us, we are happy to assist you.

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Dedjd Du T Ijpfx Apljut Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 Dedpeqnt N Djfx Apleut -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding power source: TIG WSM400R -Cooler

Leto izdelave: 2022, stanje: novo, Lifting capacity: 10,000 kg Rotational speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Duodpfx Asfxgp Ujpljt Welding current transmission: 800 A

Stanje: rabljeno, Leto izdelave: 1987, Pressure / t Stroke / mm Table size / mm Machine weight approx. 65,000 kg Manufacturer: Schäfer Type: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest pipe diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B material thickness: 35 mm Cone Bending: Dodpfouddcasx Aplsut For cone bending, all rollers except the upper roller can be set at an angle. The roller positions can be read on indicator instruments. For semi-automatic or fully automatic operation, the roller bearing blocks are equipped with scale bars and cam slides for limit switch actuation. This allows the rollers to repeatedly move into the same preset position, ensuring very high uniformity of the bent sections.

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: Dsdpoq Sc Auefx Aplsut 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Dedpfohpktvsx Aplout The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: rabljeno, Length: 1800 mm Djdpscxxu Dofx Apljut Width: 1200 mm Machine weight approx.: 1.6 t Space requirement approx.: 1.8 x 1.2 x 0.4 m - Measuring plate with 5 special feet - Good condition

Stanje: rabljeno, Leto izdelave: 2014, skupna višina: 2.400 mm, skupna dolžina: 4.500 mm, skupna širina: 2.200 mm, Unladen weight: 2,500 kg CNC machining center Biesse Skill 12 24 G FT Year of manufacture: 2014 Machine no.: 60961 Toolholder: HSK F63 10x vertical drilling 12 tool changer positions Software: BiesseWorks X-axis: 2465 mm Y-axis: 1260 mm Z-axis: 324 mm Disassembled for transport on a standard trailer; 4500x2200x2400 mm; net weight 2,000 kg - Special features: - Note: The pallet with the white control cabinet does not belong to this machine - Year of manufacture: 2014 - Documentation available: Yes - CE certificate available: No - Serial number: 60961 - Number of milling spindles [pcs]: 1 - Type of router table: Flat table - Drilling unit included: Yes - Vertical drill spindles [pcs]: 10 - Tool changer positions [pcs]: 12 - Vacuum pump available: Yes Djdpfx Aownhanopljut - Quantity [pcs]: 1 - Brand: Becker - Working area X [mm]: 2465 - Working area Y [mm]: 1260 - Z-axis working area [mm]: 324 - Transport dimensions: 4500 mm x 2200 mm x 2400 mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages: 1 Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT is deductible for business customers Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Dodpfx Aeg U Uv Rjpljut Location: In stock, 54634 Bitburg - Immediately available -