Ima Bima nakup rabljenega (137)

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Bedpfx Afswmm Nronswi

Stanje: rabljeno, številka stroja/vozila: 006054, Delovno območje os X: 5300 mm Bodowcx T Ujpfx Afnewi Delovno območje os Y: 1300 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 9 kW Število upravljanih osi: 5 osi Število vrtalnih vretenc: 32 Število mest za orodja: 8

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 24406, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 900 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working Area (Axis Travels) • X-axis: approx. 3300 mm Bwjdpjykn Dwefx Afnsi • Y-axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, nesting of panels 🔹 Tool Magazine • Automatic tool changer (ATC): up to 18 positions 🔹 Material Clamping System • Vacuum table with beams and suction cups 🔹 Saw Aggregate • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm — 🛠️ Functions and Equipment (Typical) • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chip conveyance (belt conveyor) — 📌 General Information • Manufacturer: IMA Schelling (Germany) • Year of manufacture found in listings: approx. 2010–2016 (often 2014) • Applications: Furniture, MDF boards, HPL, solid wood, nesting

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 100 mm, število osi: 3, največja hitrost vretena: 24.000 obr/min, Ta IMA BIMA 410 V je bila izdelana leta 2005. Gre za CNC obdelovalni center za les z integriranim enoto za obrobljanje robov. Značilnosti vključujejo delovno območje osi X do 6000 mm, osi Y 1400 mm in osi Z do 100 mm. Glavna moč vretena je 7,5-11 kW, z razponom vrtljajev od 1.500 do 24.000 min⁻¹. Menjalnik orodij ima 18 pozicij. Možnosti obdelave robov pokrivajo debeline od 0,4 do 3 mm. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Avtomatski rotacijski menjalnik, 18 pozicij • Vertikalna vrtalna glava z do 21 vreteni (11+10) Dodatne informacije Obrobljalni stroj VT 100 Za štiristransko in čelno obdelavo robov Bsdpfxeyap U As Afnswi Debelina robu: 0,4-3 mm Višina robu: 14-64 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 1.200 mm, skupna masa: 7.200 kg, največja hitrost vretena: 15.000 obr/min, This IMA BIMA CUT 120/240 was manufactured in 2003. It is a CNC woodworking center with a working area of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. The machine features a main spindle with HSK F63 tool holder and a drive power of 7.5 kW. Additionally, it is equipped with a tool changer magazine holding 18 tools and offers a wide range of drilling and milling capabilities. Contact us for more information about this machine. Machine Advantages Quality Features • Drive power: 7.5 kW in S1 mode • Spindle lubrication: permanent grease lubrication from factory • Spindle cooling: water cooling • The automatic tool/adapter changer magazine features a disk changer design with 18 coded magazine slots and moves with the support along the X axis. • The adapter units include a sawing unit (max. 15,000 rpm, 200 mm blade), a horizontal drilling and milling head with 4 spindles (max. 15,000 rpm), a drilling unit for lock cases or sash holes (max. 12,000 rpm), a vertical drilling unit S21 (6,000–9,000 rpm, max. 35 mm drilling diameter), and a horizontal drilling/sawing unit (4,500–6,000 rpm, max. 125 mm groove saw, swiveling range 0 or 90 degrees). • Graphical user interface: imawop for PC • Bima Cut Editor Office • Bima Cut Editor Import Interface • Controller for label printer Bjdjx U T Hmjpfx Afnowi • Label printer Technical Features • Max. clamping height from top of suction cup Z1: 100 mm • Workpiece thickness Z2: 14 – 38 mm • Working table height: approx. 1000 mm • Alternate field machining area without pendulum operation X: 2 x 2000 mm • Central clearance X without pendulum operation: 200 mm • With pendulum operation X: 2 x 1500 mm • Central clearance X with pendulum operation: 1200 mm • Automatic tool feed • Feed force: 11,000 N • Rotation direction: programmable, clockwise/counterclockwise Additional Information Machine still under power

Stanje: rabljeno, številka stroja/vozila: 007842, Delovno območje os X: 5000 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 18 kW Število krmiljenih osi: 4 osi Bjdpfxsyhbiuo Afnewi Maksimalna višina roba: 64 mm Število vrtalnih vreten: 14 Število mest za orodja: 18

Stanje: rabljeno, številka stroja/vozila: 007841, Delovno območje os X: 4200 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Bedpoyg Ef Defx Afnewi Moč glavnega vretena: 18 kW Število krmiljenih osi: 4 osi Maksimalna višina roba: 64 mm Število mest za orodje: 18

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.000 mm, število osi: 3, proizvajalec krmilnikov: SIEMENS, skupna masa: 5.000 kg, moč vretenovega motorja: 12.000 W, največja hitrost vretena: 9.000 obr/min, Additional Equipment • 1 vertical drilling unit in Y-direction Bwodpfjx N Ulmox Afnei • 1 vertical drilling unit in X-direction • 1 main spindle with programmable rotation direction • 1 centrally integrated CNC axis, rotatable 360 degrees • 1 saw adapter unit, fixed at 90 degrees • Saw blade diameter: 200 mm • 1 adapter unit for horizontal drilling and milling head (crosshead) • 1 adapter unit for horizontal milling cutter (face milling) • 2x adapter units for hinge drilling • Includes 1 new Siemens vacuum pump + extensive accessories Machine Advantages Technical Machine Advantages • Max. clamping height from top edge of suction plate: z1 100 mm • Working height: 950 mm • Traverse speed: 20 m/min • Acceleration: 5 m/s² • Alternating field area without pendulum operation: x 2 x 1400 mm • Clear space in the center: x 200 mm • With pendulum operation: x 2 x 900 mm • Clear space in the center: x 1200 mm • Automatic tool feed • Feed force: 11,000 N Additional Information Media Extraction standard: Connections for 200 mm, 120 mm, and 100 mm diameters Extraction speed: approx. 28 m/sec Extraction volume: approx. 3,200 m³ per hour 1 vacuum pump 40 m³/h Compressed air supply: Central connection for 1/2" with maintenance unit. Constant air pressure 6 bar Electrical Equipment Electrical installation according to EN Control cabinet dimensions (HxWxD): 2000 mm / 1200 mm / 600 mm Safety and protection measures in accordance with CE regulations

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats. PC control type: ICOS OPEN CNC – IMAWOP software. Worktable: console table (No. 8 console tables, each 1400 mm). Console tables with LED / diode light strips. Automatic tool change system (magazine – 18 tool positions). Working area (X-Y-Z): 4000 x 2100 x 300 mm. Working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. of working zones: 2. Vacuum pump / capacity (m³/h): 140. Chip conveyor. Separate electrical and control cabinets. Total connected load (kW): 32. Working units (top): - 21 independent vertical drilling spindles (4 x 1.2 kW) - 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) Bwedpfx Aohu U Nxsfnji - Edge banding unit (hot melt glue) VT 100. Edge material (rolls): thickness (min/max): 0.4 / 3 mm. Edge magazine for rolls (2 compartments). OPTIONS: - Saw unit, max diameter 200 mm. - Combination unit (flush milling & profile scraper). - Drilling head (with 4 horizontal drilling spindles).

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (ROBOT head) Gantry design construction Control: ICOS CNC – Software: IMAWOP / (OPTION IMAwinCAD) Safety cabin for machining head Clamping table with 8 consoles LED positioning system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disk-type tool changers – Magazine/tool stations (8 each) + TC8 (18 stations) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity in m³/h): 140 Separate electrical and control cabinet. Total power connected (kW): 23 WORKING UNITS (TOP): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit), robot head (HSK F63) Bwjdpfefin Sasx Afnsi Vertical main spindle power (kW): 9 Independent Z-axis travel: 650 mm A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining centre for milling, drilling, cutting, and edgebanding Bwsdpfefbmqtox Afnei Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edgebanding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - 1200 mm LED setup assistance for vacuum cup (sleeve) positioning (Y-axis) 1 vacuum pump (capacity 140 m³/h) Safety enclosure for working head, safety foot mats Chip conveyor No. 2 vertical main spindles (milling units), HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (disc changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing module (hot melt glue) VT 50 Edge magazine for rolls (6 compartments) OPTIONAL: 1 adapter unit for saw, fixed 90 degrees, max diameter 200 mm 1 adapter unit for flush milling and profile pull blade 1 adapter unit horizontal drilling & milling head (cross head) with 4 horizontal spindles

Stanje: zelo dobro (rabljeno), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles. No. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Rotary changer – magazine with 18 tool slots Maximum working area (X – Y – Z): 4250 x 1600 x 60 mm Bodpfx Afjvxhnuonewi Minimum workpiece dimensions (X – Y – Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X – Y – Z): 4250 x 2200 x 60 mm Chip conveyor Separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – power: 14.5 kW (S6) / 7.5 kW (S1) No. 3 grippers for clamping and moving the panels onto the machine’s vacuum cups No. 5 air tables for staging panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt Panel discharge system with motorized conveyors

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Combi-unit (flush-trimming/profile scraper) Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system Bsdpfxotixpus Afnjwi

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED set-up aid for vacuum cup positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Operator protection cabin for working head, safety tread mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool changer (carousel type) with 18 tool stations No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross aggregate with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – gluing station (hot melt glue) VT 100 No. 2 edge magazines for rolls OPTIONS: Bwjdjq Nmutopfx Afnoi No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraping blade No. 1 barcode reader

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel 650 mm) Maximum working area (X - Y - Z) for edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – 1400 mm LED setup assistance for vacuum cup (socket) positioning (Y-axis) No. 2 vacuum pumps (capacity 140 m3/h) Safety enclosure for machining head, safety tread mats Chip conveyor Bjdpfxew A Ruqo Afnjwi No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (rotary magazine) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter 200 mm Edge banding unit (PUR glue + pre-melter 283.203) VT 100/100 WITH 45° SWIVEL EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Bsdpfox D Nitjx Afnowi Ta 3-osni CNC obdelovalni center za les IMA BIMA CUT 145/330 je bil izdelan leta 2014. Ponaša se z delovnim območjem 3300 mm na osi X in 1450 mm na osi Y ter močjo vretena 18 kW. Stroj je opremljen z orodnim magazinom za do 18 pozicij in vakuumskim vpenjalnim sistemom za varno pritrditev obdelovanca. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju IMA BIMA CUT 145/330, ki ga imamo v prodaji. Kontaktirajte nas za več informacij. Vrste uporabe CNC obdelava lesa

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6200 kg Glavni pogon Bodpjx D Rt Hefx Afnowi Območje hitrosti vretena: 8000–24000 Število osi: 3 Pomik Pomik po X-osi: 3000 mm Pomik po Y-osi: 1200 mm Pomik po Z-osi: 100 mm Ta 3-osni IMA BIMA 210 120/300 je bil izdelan leta 2006. Odlikuje ga velik hodi osi (X = 3000 mm, Y = 1200 mm, Z = 100 mm), kar omogoča obdelavo obdelovancev dolžine do 2800 mm in širine do 1200 mm. Glavno vreteno ima moč 7,5 kW z območjem vrtljajev od 8.000 do 24.000 min⁻¹. Teža stroja znaša približno 6200 kg in vključuje CNC krmilje IMA IMATRONIC. Za dodatne informacije o stroju nas kontaktirajte. Uporaba CNC obdelava lesa

Stanje: rabljeno, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support plate for positioning suction cups. Suction cups can be manually positioned on the work surface using a laser indicator. No. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles arranged as follows: * 11 vertical on the X-axis * 10 vertical on the Y-axis. Edge banding unit with glue pot and pre-melter for EVA glue (new glue pot as of 2023). Nordson pre-melter for PUR bonding on folding panels. No. 1 trimming unit (end trimmer). No. 1 milling unit. No. 1 cross-unit with 4 horizontal drilling lines. No. 1 blowing unit. Edge storage unit with 2 positions. Front carpet protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS TO BE VERIFIED. Bwjdpfx Afow El Nhenoi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 - 8 manually adjustable supports along X-axis - 3 vacuum suction cups per console - Vacuum pump 100 m³/h -2* - Vacuum connection for templates - LED display for suction cup position indication - Working area X: 200 – 6150 mm - Working area Y: 0 – 1600 mm for milling/drilling, up to 1525 mm with edge banding - Working area Z: 12 – 125 mm (clearance 150 mm) Bwjdpjxrltksfx Afnoi - 14 vertical drilling spindles - Horizontal drilling and grooving saw unit, swiveling 90° - Milling spindle 11 kW / 7.5 kW up to 24,000 rpm - With C-axis, 360° interpolation, liquid circulation cooling - 18-position tool changer mounted on Y-support - VT 100 edge banding unit, 4-sided/complete, rotation range 740 degrees - With 2-position roller magazine, automatic granule feed Adapter units: – Fixed saw 90° – 5-axis saw/drill/milling unit, Vario NC – Horizontal milling head (corner notching) – Flush milling and profile scraper with flat scraper extension - ICOS open control with 17″ TFT - ImaWop 6.0 including MDC and production list software - Chip conveyor - Side safety fencing and front safety mats - Rear: wall installation or separate safety protection required

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 80.859 h, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.630 mm, TEHNIČNI PODATKI X-pomik brez lepljenja: 6.000 mm X-pomik z lepljenjem: 5.000 mm Y-pomik: 1300 mm Y-pomik z glavno vreteno + premer orodja 20 mm: 1630 mm Y-pomik z lepljenjem: 1450 mm Pripravljalna miza: Dyna Poin BIMA 410 V Bwsdpfex Af Ivex Afnei Zasedenost: 4 mesta Enota za obrobljanje robov: prisotna Delovne ure: 80.859 h

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Ηλεκτρονικά ελεγχόμενο κέντρο κατεργασίας CNC με: • Τυπικό τραπέζι • Χαλιά ασφαλείας • 1 αντλία κενού 100 m³/ώρα • IMATRONIC-NT • Πλευρικό πλέγμα ασφαλείας δεξιά • Με πόρτα και μπροστινό αριστερά • Φορητή κονσόλα για τη ρύθμιση πείρων και βιδών συγκράτησης Τεχνικά χαρακτηριστικά: Bwodjwyvfcjpfx Afnei • Περιοχή κατεργασίας με τυπικές μονάδες X/Y 6000/1200mm • Μέγιστο ύψος σφιγκτήρα από την άνω επιφάνεια της πλάκας κενού Z1: 100mm • Μέγιστο πάχος πάνελ Z2: ανάλογα με τη χρήση • Ύψος τραπεζιού εργασίας: περ. 1000mm • Εναλλακτική περιοχή πεδίου χωρίς κυκλικό κύκλο X: 2 x 2650mm Ελεύθερος χώρος στο κέντρο X: 700mm • Με επεξεργασία σε κύκλο X: 2 x 2250mm Ελεύθερος χώρος στο κέντρο X: 1500mm • Κεντρική λίπανση • Τροφοδοσία ρεύματος: 3/N/PE, 400/230 V • Λογισμικό IMAwinCAD για μηχανές BIMA, συμπεριλαμβανομένης συγκόλλησης ακμών • IMAWOP • Κύρια άτρακτος HSK F63/διάμετρος κώνου 38mm/12kW/υδρόψυκτη • 1 μονάδα οπής πριονιού • 1 μονάδα πριονιού αυλακώματος • Συγκόλληση ακμής VT 61

Stanje: rabljeno, številka stroja/vozila: 005854, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroji za lepljenje obrob: stroj 1 in 2 Bedpev Hinxjfx Afnswi Maks. širina panela: 3300 mm Maks. podajalna hitrost: 30 m/min Delovni agregati, desna stran: 11 kos Delovni agregati, leva stran: 11 kos

Stanje: rabljeno, številka stroja/vozila: 006561, Vrsta nameščenega roba: tanek rob, močan rob, masiven les Sistem lepljenja: EVA Stroj za lepljenje robov: Stroj 1 Bwjdpfjqa Rxaox Afnei Maks. širina panela: 2800 mm Delovne enote, desna stran: 11 kos Delovne enote, leva stran: 11 kos

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Bodowukzhspfx Afnewi Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110

Stanje: rabljeno, številka stroja/vozila: 005635, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 2: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 4: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 5: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Bsdswuudyopfx Afnowi Pozicija 6: Razkladalec IMA + MEINERT-COMBIMA/II/650/A/R3