Mini Bager Leasing Ima nakup rabljenega (135)

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 Dodpfxeun N Dlo Ah Soki B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Dsdpfx Aheu Ekbns Sjki Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Dksdewz Ic Aspfx Ah Soi Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Dodpfx Ahounrwno Sski Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This IMA NOVIMAT I /G80/390/R3 edge banding machine was manufactured in 2013. It is equipped with two 4.5 kW motors operating at 150 Hz, enabling speeds of up to 9,000 rpm. With an edge height of 14 to 65 mm and a roll diameter of up to 850 mm, it is ideal for precise edge banding applications. Take advantage of this opportunity to purchase the IMA NOVIMAT I /G80/390/R3 edge banding machine. Contact us for further information about this machine. Additional information: • Motor power: 2 x 4.5 kW, 150 Hz • Motor speed: 9,000 rpm • Power supply: 230 V • Heating capacity: 6 x 500 watts • Adjustment range: Vertical approx. 17 mm, horizontal approx. 30 mm • Stroke: max. 8 mm • Roll diameter: max. 850 mm • Edge height: 14 - 65 mm • Workpiece overhang: min. 30 mm + edge thickness, max. 80 mm including edge thickness • Workpiece length: min. 130 mm • Workpiece gap: min. 300 mm • Workpiece distance: min. 990 mm • Workpiece thickness: min. 8 mm, min. 12 mm with tracing wheel, max. 80 mm • Single tracing workpiece overhang: min. 30 mm • Double tracing system workpiece overhang: min. 38 mm for max. 4 profiles, max. 50 mm Djdpfx Aox D Nh Ash Seki • Cutterhead diameter: 125 mm • Motor shaft: 30 x 68 mm diameter • Internal thread: M16, depending on motor, left or right • Cutting cross-section motor power: 0.20 kW, 200 Hz, 400 V, 12,000 rpm for max. 195 mm², option: 0.66 kW, expandable up to max. 1,100 mm² • Tool diameter: 160 mm / 48 teeth • Swivel range: 0 and 25 degrees • Workpiece feed speed: max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge protrusion: upper edge, max. 3 mm; lower edge, max. 2 mm for straight edges • Edge material: max. 4 mm for wood and plastic; aluminium, max. 3 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.000 mm, število osi: 3, proizvajalec krmilnikov: SIEMENS, skupna masa: 5.000 kg, moč vretenovega motorja: 12.000 W, največja hitrost vretena: 9.000 obr/min, Additional Equipment • 1 vertical drilling unit in Y-direction • 1 vertical drilling unit in X-direction • 1 main spindle with programmable rotation direction • 1 centrally integrated CNC axis, rotatable 360 degrees • 1 saw adapter unit, fixed at 90 degrees • Saw blade diameter: 200 mm • 1 adapter unit for horizontal drilling and milling head (crosshead) • 1 adapter unit for horizontal milling cutter (face milling) • 2x adapter units for hinge drilling • Includes 1 new Siemens vacuum pump + extensive accessories Machine Advantages Technical Machine Advantages Dedpsx N Ulmofx Ah Sjki • Max. clamping height from top edge of suction plate: z1 100 mm • Working height: 950 mm • Traverse speed: 20 m/min • Acceleration: 5 m/s² • Alternating field area without pendulum operation: x 2 x 1400 mm • Clear space in the center: x 200 mm • With pendulum operation: x 2 x 900 mm • Clear space in the center: x 1200 mm • Automatic tool feed • Feed force: 11,000 N Additional Information Media Extraction standard: Connections for 200 mm, 120 mm, and 100 mm diameters Extraction speed: approx. 28 m/sec Extraction volume: approx. 3,200 m³ per hour 1 vacuum pump 40 m³/h Compressed air supply: Central connection for 1/2" with maintenance unit. Constant air pressure 6 bar Electrical Equipment Electrical installation according to EN Control cabinet dimensions (HxWxD): 2000 mm / 1200 mm / 600 mm Safety and protection measures in accordance with CE regulations

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 100 mm, število osi: 3, največja hitrost vretena: 24.000 obr/min, Ta IMA BIMA 410 V je bila izdelana leta 2005. Gre za CNC obdelovalni center za les z integriranim enoto za obrobljanje robov. Značilnosti vključujejo delovno območje osi X do 6000 mm, osi Y 1400 mm in osi Z do 100 mm. Glavna moč vretena je 7,5-11 kW, z razponom vrtljajev od 1.500 do 24.000 min⁻¹. Menjalnik orodij ima 18 pozicij. Možnosti obdelave robov pokrivajo debeline od 0,4 do 3 mm. Za več informacij nas kontaktirajte. Dkedeyap U Aepfx Ah Ssi Prednosti stroja Tehnične prednosti stroja • Avtomatski rotacijski menjalnik, 18 pozicij • Vertikalna vrtalna glava z do 21 vreteni (11+10) Dodatne informacije Obrobljalni stroj VT 100 Za štiristransko in čelno obdelavo robov Debelina robu: 0,4-3 mm Višina robu: 14-64 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine offers a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control unit, it supports both coil and strip edging materials. Ideal for high-throughput environments requiring flexibility and reliability in edge processing. Contact us for further information about this machine. Additional Equipment • Hot-melt glue application unit: Single roll/strip magazine for coil material up to 3 mm and strips up to 12 mm • End trimming unit: 2 motors, each 660 W, pneumatically tiltable from 0° to +25° Machine Advantages Technical Machine Advantages • Min. infeed width: 244 mm (for longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm Dedpfx Ahox D I D Ao Sski • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Additional Information Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough milling unit: 80 kW motor, 6,000 rpm Double milling unit: 2 motors, each 45 kW, 9,000 rpm Flush milling unit: 2 motors, 1,850 W, 12,000 rpm Multi-function unit: NC-controlled with 2 motors, automatic tool change for 4 profiles Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine. Machine Benefits Technical Machine Advantages • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Edge machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: particleboard, MDF • Surface material: direct coating (melamine resin paper), paper, foil, veneer Additional Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Prefabricated edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, 15° chamfer Plastic edge up to 3.0 mm, depending on radius tool Milling strips flush up to 8 mm Machine Constant workpiece projection from chain track: 35 mm + edge thickness Max. cut cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Base height (top edge of chain track): 940 mm Unit side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Jointing unit 08.379 and air nozzle 2 motors, each 4 kW, 9000 rpm Gluing unit 283.1513 Glue reservoir 0.8 l, 60 mm high Suitable for hot-melt or PUR adhesive With individual roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 auxiliary pressure rollers Cutting unit 08.415 Pneumatically swiveling to 0° or 8° 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy milling unit SKF-L 4 motors, 12,000 rpm Profile length in feed direction: max. approx. 50 mm Workpiece thickness: max. 60 mm Working speed: max. approx. 20 m/min Distance between 2 workpieces: min. approx. 400 mm Djdpfx Ahex U U Dtj Soki Profile drawknife 08.519 For post-scraping of an upper and lower milled quarter-circle profile Self-tracing drawknife unit 08.521 For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces Buffing unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 19.714 h, Ta IMA Advantage 550 je bila izdelana leta 2010. Rabljeni enostranski robni lepilni stroj z agregatom za spajanje, grelnikom, EVA lepilnim agregatom in magazinom za robni material v roli. Opremljen je z enoto za rezanje, zgornjo/spodnjo rezkalno enoto za poravnavo in profilnim strgalom. Stroj ponuja podajalno hitrost 20 m/min, kar je idealno za učinkovito proizvodnjo. Izkoristite priložnost za nakup tega robnega lepilnega stroja IMA Advantage 550. Za več informacij nas kontaktirajte. Dodatna oprema • Enota za spajanje robov (fugenschneider) • Grelnik • EVA lepilni agregat • Magazinska enota za robne trakove v roli • Rezalna enota • Zgornje/spodnje poravnalna rezkalna enota • MFA z 2 motorjema za radij r2, servo krmiljenje • Profilno strgalo • Površinski strgalnik Dkodeyaqbwjpfx Ah Ssi • Polirni agregat (schwabbelaggregat) Prednosti stroja Tehnične prednosti stroja • Podajalna hitrost: 20 m/min Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Dsdswmm Nrjpfx Ah Soki

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ta popolna IMA Combima linija za lepljenje robov z nakladalno postajo je bila izdelana leta 2002. Gre za robusten dvostranski stroj za lepljenje robov s širino obdelave od 235 do 2600 mm in dolžino od 200 do 2600 mm. Deluje s hitrostmi od 10 do 40 m/min, vključuje enoto za spajanje, polavtomatsko lepilno enoto z 6-mestnim magazinom robnega traku ter enote za ravno in profilno obrezovanje. Izkoristite priložnost za nakup te dvostranske lepilke IMA Combima. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Lepljenje robov Dkodpjx D Iq Nsfx Ah Sji

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Ta 3-osni CNC obdelovalni center za les IMA BIMA CUT 145/330 je bil izdelan leta 2014. Ponaša se z delovnim območjem 3300 mm na osi X in 1450 mm na osi Y ter močjo vretena 18 kW. Stroj je opremljen z orodnim magazinom za do 18 pozicij in vakuumskim vpenjalnim sistemom za varno pritrditev obdelovanca. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju IMA BIMA CUT 145/330, ki ga imamo v prodaji. Kontaktirajte nas za več informacij. Vrste uporabe Dkjdpfex D Nitex Ah Sei CNC obdelava lesa

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6200 kg Glavni pogon Območje hitrosti vretena: 8000–24000 Število osi: 3 Pomik Pomik po X-osi: 3000 mm Pomik po Y-osi: 1200 mm Pomik po Z-osi: 100 mm Ta 3-osni IMA BIMA 210 120/300 je bil izdelan leta 2006. Odlikuje ga velik hodi osi (X = 3000 mm, Y = 1200 mm, Z = 100 mm), kar omogoča obdelavo obdelovancev dolžine do 2800 mm in širine do 1200 mm. Glavno vreteno ima moč 7,5 kW z območjem vrtljajev od 8.000 do 24.000 min⁻¹. Teža stroja znaša približno 6200 kg in vključuje CNC krmilje IMA IMATRONIC. Za dodatne informacije o stroju nas kontaktirajte. Uporaba Dodpfx Aox D Rt Hoh Soki CNC obdelava lesa

Stanje: zelo dobro (rabljeno), Robilni stroj Advantage 4612F - redno vzdrževan, letnik 2002 - skupna dolžina 6000 mm - širina 1100 mm - višina 1900 mm - teža 3100 kg - pomik 12 m/min - dimenzije obdelovanca: širina 65 mm, maks. debelina: 45 mm, min. debelina: 10 mm, dolžina: 150 mm, višina roba 55 mm, pritisk 7 bar Dkedox Srp Ijpfx Ah Sei - z dvema izmenljivima posodama - predrezkanje, poravnalna žaga, multifunkcijska enota, profilno in ravno rezilo, poliranje - s predrezkalno enoto

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0011434 - Koda proizvajalca: - Stanje: Rabljeno - Funkcionalnost: Ni testirano - Združljiv stroj: - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. 65KG 120X80X60 Djdpfx Aeylakxoh Sjki

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood koda: RU0011433 - Koda proizvajalca: - Stanje: Rabljeno - Funkcionalnost: Ni preizkušena - Kompatibilni stroj: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 65KG 120X80X60 Dkjdoylaibepfx Ah Soi

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Dedpoyk Tkvjfx Ah Soki Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: rabljeno, številka stroja/vozila: 005854, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroji za lepljenje obrob: stroj 1 in 2 Maks. širina panela: 3300 mm Maks. podajalna hitrost: 30 m/min Delovni agregati, desna stran: 11 kos Djdpev Hinxjfx Ah Soki Delovni agregati, leva stran: 11 kos

Stanje: rabljeno, številka stroja/vozila: 006561, Vrsta nameščenega roba: tanek rob, močan rob, masiven les Sistem lepljenja: EVA Dksdpfxsqa Rxae Ah Sei Stroj za lepljenje robov: Stroj 1 Maks. širina panela: 2800 mm Delovne enote, desna stran: 11 kos Delovne enote, leva stran: 11 kos

Stanje: rabljeno, številka stroja/vozila: 006089, Type of applied edging: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Dkjdeim S Hqepfx Ah Ssi Multifunctional unit: yes Max. feed speed: 30 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 006054, Delovno območje os X: 5300 mm Delovno območje os Y: 1300 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 9 kW Število upravljanih osi: 5 osi Število vrtalnih vretenc: 32 Število mest za orodja: 8 Dkodpfx Ahewcx T Ue Sei

Stanje: rabljeno, številka stroja/vozila: 005657, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: PUR Dkodpfx Ahswcx Tus Ssi Spojno rezkanje: da Multifunkcijska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 30 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 13 št.

Stanje: rabljeno, številka stroja/vozila: 007504, Pozicija 1: Vertikalni skladiščni sistem IMA + SCHELLING-AH 6 Pozicija 2: Kotna krožna žaga za plošče IMA + SCHELLING-AH 6 Dkodpfx Ahswuucio Sji Pozicija 3: Nakladalnik IMA + SCHELLING-AH 6

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Dsdpfowukzhjx Ah Sjki Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110