Stroj za oblaganje robov

IMA NOVIMAT/CONTOUR/I/G80/700/L20+

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2012, Funkcionalnost: nepreverjeno, največja širina rezanja: 4.500 mm, hitrost pomika os X: 140 m/min, dolžina odseka (maks.): 2.200 mm, Oprema: CE označba, dozator, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Dujdpfx Afoyxn Ads Sjr Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of crosscut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible pusher system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, safeguarding, and use of the machine at the destination. External reference: 5711

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, največja hitrost vrtenja: 2.970 obr/min, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 1.000 mm, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of lower vertical groups: 5 Number of upper vertical groups: 1 Duodpfxoyzy T Tj Af Ssr Lateral horizontal groups: yes Number of pressure elements: 5 Number of lateral horizontal groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Installed total power: 35 kW EQUIPMENT Lateral horizontal groups Group positioning via CNC Z-axis positioning via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual physical and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6157

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673 Dodpfxoyxndbs Af Sour

Leto izdelave: 2007, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna dolžina: 5.700 mm, skupna širina: 1.000 mm, dolžina obdelovanca (maks.): 2.000 mm, širina obdelovanca (maks.): 800 mm, Oprema: CE označba, TEHNIČNI PODATKI Največja širina panela: 800 mm Najmanjša dolžina panela: 140 mm Največja dolžina panela: 2.000 mm Dolžina traku: 5.700 mm PODROBNOSTI STROJA Dimenzije (D x Š): 5.700 x 1.000 mm Povratek delov k lepilki robov: levo Izvoz panela: z zračnim lebdečim mizo Pomik panela: z motoriziranim trakom OPREMA Djdpfjyzzhxsx Af Sour CE varnostni standard Stroj se prodaja in dostavlja v dejanskem tehničnem in pravnem stanju („kot je videno in sprejeto“), na podlagi fotodokumentacije in tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico izdelek pred prevzemom pregledati in je odgovoren za namestitev, varovanje in uporabo stroja na namenski lokaciji. Zunanja referenca: 6200

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.400 mm, pomik osi Y: 1.300 mm, hitrost pomika os X: 40 m/min, hitrost podajanja osi Y: 45 m/min, Oprema: CE označba, The machine has the following configuration: Drilling Groups: Upper group with 30 vertical and 6 horizontal spindles Milling Group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling Group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool Magazine 1: 24 positions, located at the rear of the machine Tool Magazine 2: 6 positions, located on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece through-feed height: 400 mm Axis X travel speed: 40 m/min Axis Y travel speed: 45 m/min Dodjyzy S Njpfx Af Sjur Axis Z travel speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Support table with suction bars Number of suction bars: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial records of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8340

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Dsdpfxsyxl Sie Af Sjur Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Dusdpfx Aoyk Tkvsf Sjr Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)