OBOJESTRANSKI BRUSILNIK ROBOV

IMA COMBIMA/II/590/B/R3

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/Software: ICOS Open (Windows based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) Fedexggzlopfx Aa Ropp EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Fsdpfxji Hn Srs Aa Rjpp Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel 650 mm) Maximum working area (X - Y - Z) for edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – 1400 mm LED setup assistance for vacuum cup (socket) positioning (Y-axis) No. 2 vacuum pumps (capacity 140 m3/h) Safety enclosure for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (rotary magazine) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter 200 mm Edge banding unit (PUR glue + pre-melter 283.203) VT 100/100 WITH 45° SWIVEL EDGE BANDING UNIT Fpjdpfx Aew A Ruqea Rep No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 812 - 5547/V.01.87.110, skupna masa: 19.190 kg, For sale is a well-maintained Nicholson debarking machine A 5 B, suitable for debarking diameters up to 56 cm. We used this machine in our small-diameter log sawmill (max. 25 cm diameter). It was operating flawlessly until its recent decommissioning. The knife cylinders were replaced not long ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast machine. Nicholson debarkers are known for their straightforward, robust design! - Minimum log length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm Fedpow D Hy Sjfx Aa Repp - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm (including rotor) - Infeed speed: up to 114 m/min (currently set to 95 m/min)

Stanje: rabljeno, številka stroja/vozila: 007960, Formatna krožna žaga: Stroj 1 in 2 Maksimalna višina panela: 200 mm Maksimalna podajalna hitrost: 36 m/min Fpjdpfxowl Dnis Aa Rsp Razdalja med utori: 450 mm

Stanje: rabljeno, Leto izdelave: 1990, Sheet width: 3050 mm Sheet thickness: 12 mm Gap between columns: 3100 mm Table height above floor: 900 mm Adjustable cutting angle: 0.5 - 3° Fsdpfx Aaju Uu Sme Rspp Strokes per minute: 6 - 13 spm Back gauge - adjustable: 1000 mm Hold-downs: 18 units Oil capacity: 350 l Total power requirement: 22.5 kW Machine weight approx.: 8 t Machine dimensions (L x W x H): 3.96 x 2.10 x 2.22 m - with adjustable cutting gap - Accessories: electric back gauge, spare blades

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Fpodpfx Aeifnzdea Rjp Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: zelo dobro (rabljeno), Rabljeni ultrazvočni generatorji z malo delovnimi urami Ustrezne sonotrode, kabli, ojačevalniki in generatorji na zalogi in jih je možno dodatno kupiti Na voljo je več ultrazvočnih generatorjev Različni proizvajalci in znamke Znamka: Herrmann Znamka: Weber Znamka: SONIC Znamka: COMPProve Fedpfx Aewiw Ahja Ropp Prikazovalnik: Digitalni zaslon z LED prikazom izhodne moči (%) Izhodna moč: neprekinjeno nastavljiva od 0 do 100 % Krmiljenje: Vklop/izklop stikalo na sprednji plošči Statusne indikacije: Večbarvni LED prikazovalniki za obratovalna stanja Ohišje: Robusta industrijska izvedba iz kovine

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max, option): mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise protection cabin Cam spacing (mm): 500 EDGING PROCESSING (for each side): Fpodpfx Aok Nk R Dea Rsp Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Rough-milling unit (2 x approx. 5.8 kW) Universal profiling spindle, 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW) 0°-30° Multi-function unit (radius/contour milling unit) with 2 revolvers (8+8 positions) – max. 27 m/min Universal grooving/rebating and profiling spindle 1 x approx. 4 kW (0° - 90°) Profile scraping unit + flat scraping unit + buffing unit

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Fpsdeidqphopfx Aa Rop Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)