LOS-1 STROJ ZA ROBOVE

IMA Combima / I / R75 / 1480

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: Duodpfx Agsdfgg Ispep A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives Dsdpshuthyjfx Agpeup immediately ready for operation

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Dusdpfxohlp Efe Agpop

Leto izdelave: 1988, stanje: potreben popravila (rabljeno), Mehanizacija pred skobeljni stroj za KVH/BSH – za dolžine do približno 13 m. Idealna KVH+BSH linija pred skobeljni stroj. Vzdolžno razstavljanje - enojno sortiranje. 4 krožne žage za prečno razrezovanje, nastavljive po širini. Prečni razrez: 180 x 220 mm, 150 x 300 mm. Zadostuje ena upravljalna oseba. Dujdpovbtpefx Agpjp

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Djdpfoi Ezx Dox Agpoup Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Dodpfx Agedmi Niopjup Gewicht: 4200 kg

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 Dsdpeilqvrsfx Agpeup The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: rabljeno, Edge thickness: from 0.4 to 5.0 mm Workpiece thickness: from 10 to 50 mm Total length: 4000 mm Feed speed: 11 m/min Dusdpfx Agjwgwl Dopjp Bimatic Edge Bander Model: Prima 7.5 Two ----- Manufacturer's Description: Technical Data: Edge thickness: 0.4 – 5 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction spigots: 3 x 150 mm Connection: 9 kW – 400 V / Compressed air: 6 bar Units: Jointing milling unit incl. AIGNER diamond jointing cutter heads, with Konstantin DIA quick-change knife system and controlled edge air blast nozzle after the 2nd jointing cutter head. Cut-off saw unit with extraction device incl. 2 pneumatically swivelling saw blades, adjustable and programmable from the control panel. MULTI-radius milling unit with 4 position motors, adjustable and programmable from the control panel. Includes DIAMOND cutters with 1 mm and 2 mm radii. Corner rounding unit (copy milling unit) with nesting function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The complete unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1 mm and 2 mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Incl. extraction device with chip collection box for scraper shavings. Flat scraper unit with four-sided scraper blades, reusable on 4 edges. The complete unit is pneumatically engageable/disengageable. Removed glue residues are extracted. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth/sisal/lambswool wheels for cleaning and polishing. General Features: - 90° infeed guide - Telescopic outfeed with double support - Motorised infeed fence (jointing thickness setting), adjustable and programmable from the control panel - Motorised upper pressure beam, adjustable and programmable from the control panel - Motorised pressure zone, adjustable and programmable from the control panel - 5 mm version: quick-change motors with reversible flush cutters, interchangeable for milling motors with radius cutters - High-gloss package: roller sensing for radius milling unit, radius scraper unit, and flat scraper unit - Large visual, noise and safety enclosure for all units and the glue pot - Interior lighting - Control panel with 15” touchscreen and intuitive operator guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece gap monitoring - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and high workpieces (specially for PUR adhesive) - Additional quick-change glue pot - Pressure zone with 3 pressure rollers, with the first roller driven by a motor - Heavy-duty roller shear for edging 54 x 3 mm - Original RIEPE spraying system - In front of the jointing milling unit: LPZ II separator - In front of the saw unit: cooling and anti-static LP 289/99 - Mo...

Stanje: pripravljen za uporabo (rabljen), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Dedpfem Habdjx Agpoup

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Dusdpfx Ajgwbbqegpjp Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)