Stroj za obojestransko lepljenje robov

STEFANI (SCM Group) Performance SB2

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, CNC obdelovalni center Homag Weeke Optimat BHC Venture 3, letnik 2004, na prodaj! Hnjdpfx Asx Ey H Iemhor

Stanje: rabljeno, Rotary Vane Vacuum Pump Manufacturer: Leybold Hnsdpfx Amjbqnhgehsr Model: Trivac D25 BCS Cat. No.: 11879 Pumping speed: 25 m³/h Ultimate pressure: approx. 0.005 mbar Motor: 400V, three-phase Please send us your pump inquiry specifying your requirements.

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Hnodpogwbbqsfx Amhjr Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: rabljeno, številka stroja/vozila: 007227, Pozicija 1: Enostranski robni lepilni stroj HOMAG + LIGMATECH-KAL 310 + ZHR 05 Pozicija 2: Sistem za vračanje plošč HOMAG + LIGMATECH-KAL 310 + ZHR 05 Hnedpfx Aowuuc Aomhjr

Leto izdelave: 1995, stanje: nepreverjeno (rabljeno), Connected load 380V 55A PMS control unit Pre-milling unit 1961 Magazine 1901 Gluing station 1906 Pressure unit 1926K End trimming unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm radius up to 15 mm flush Hjdonxkm Eopfx Amhonr Radius scraper 1927 Form milling unit 1983 Buffing unit 1941 Extraction ports 1x160, 1x125 mm Compressed air connection 6 bar

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Hedjd Nt Rqopfx Amhenr Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: rabljeno, Leto izdelave: 2004, Used machine Year of manufacture: 2004 Features and Technical Data: Edge feed for coil and strip material Jointing unit with 2 milling heads Cartridge glue application system 3-roller pressure section End trimming unit Radius milling unit Radius scraper unit Corner copying unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Hnsdpfxjvymdqo Amher Edging thickness: 0.4-15 mm Max. edging height: 55 mm Min. edging strip length: 350 mm Max. edging overhang per side: 3 mm Min. workpiece width: 60 mm Min. workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6480 x 1250 x 1690 mm Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump displacement: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Hedpji Hplkofx Amhenr Machine height: 1100 mm Weight: 850 kg

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Hnedpsi Hn Srjfx Amhjr Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: rabljeno, številka stroja/vozila: 008350, Vrsta obdelanega roba: tanek rob, močan rob, masiven les Lepilni sistem: PUR, vroč zrak Obdelava spoja: da Hsdpfx Aex A Tgyjmhonr Multifunkcijska enota: da Maksimalna hitrost podajanja: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos