Ima nakup rabljenega (131)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.000 mm, skupna dolžina: 6.000 mm, skupna masa: 3.000 kg, največja višina reza: 35 mm, TEHNIČNI PODATKI Delovna širina min.: 520 mm Kwodpfxjyttdhs Adkjw Delovna širina maks.: 2.200 mm Maksimalna višina reza: 35 mm Maksimalna prehodna višina pri obstoječih rezkarjih: 35 mm Hitrost podajanja: ni nastavljiva (fiksno nastavljena, vrednost ni navedena; ocenjeno cca 8–10 m/min) PODROBNOSTI O STROJU Vrsta vhodnega toka: izmenični tok (AC) Dimenzije & Teža Dimenzije (D x Š x V): 6.000 x 4.000 x 3.000 mm Teža: 3.000 kg OPREMA Kabina za zvočno zaščito Pet obdelovalnih osi na stran, mehansko nastavljive

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Kedsyttrxjpfx Adksww Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Kwodpfewukzhex Adkjw Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110

Stanje: rabljeno, številka stroja/vozila: 005635, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 2: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 4: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Kedpfxswuudye Adksww Pozicija 5: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 6: Razkladalec IMA + MEINERT-COMBIMA/II/650/A/R3

Stanje: rabljeno, številka stroja/vozila: 005642, Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Kodpfowuciwjx Adksww

Stanje: rabljeno, številka stroja/vozila: 007504, Pozicija 1: Vertikalni skladiščni sistem IMA + SCHELLING-AH 6 Pozicija 2: Kotna krožna žaga za plošče IMA + SCHELLING-AH 6 Kodpowuuciofx Adkjww Pozicija 3: Nakladalnik IMA + SCHELLING-AH 6

Stanje: rabljeno, številka stroja/vozila: 007514, Pozicija 1: Transfer IMA-COMBIMA SYSTEM I Pozicija 2: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 3: Transfer IMA-COMBIMA SYSTEM I Kjdpfx Adjwukznsksww Pozicija 4: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 5: Transfer IMA-COMBIMA SYSTEM I Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 7: Transfer IMA-COMBIMA SYSTEM I Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 9: Transfer IMA-COMBIMA SYSTEM I

Stanje: rabljeno, številka stroja/vozila: 008269, Pozicija 1: Nakladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 2: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 3: Dvostranski robni lepilni stroj IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 4: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Kwodpfx Aox A Hggedkjw Pozicija 5: Razkladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE Kjdjun N Dlopfx Adksww The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Kodpsu Ekbnsfx Adkeww Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position Kwjdpfswz Ic Aex Adkow EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Kjdpfjunrwnjx Adkeww Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: rabljeno, številka stroja/vozila: 006619, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/I/R75/2050 Kedpfx Adsqy Em Njksww Pozicija 2: Dvo-kotni profilirni stroj – samostojni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 4: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 5: Transfer IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 6: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 7: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 8: Razkladalec IMA + MEINERT-COMBIMA/I/R75/2050

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, višina plošče: 50 mm, Iz zaprtja podjetja Tip: IMA Compact 309 C Leto izdelave: 1992 Za rolo materiale in letve do 9 mm debeline - Lepljenje s talilnim lepilom v granulatu - Obrezovanje - Žaganje Ksdpfxsx Avcdo Adksww - Poravnava s frezanjem - Strgala in poliranje Plačilo v gotovini ob prevzemu. Zasebna prodaja – brez garancije.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This IMA NOVIMAT I /G80/390/R3 edge banding machine was manufactured in 2013. It is equipped with two 4.5 kW motors operating at 150 Hz, enabling speeds of up to 9,000 rpm. With an edge height of 14 to 65 mm and a roll diameter of up to 850 mm, it is ideal for precise edge banding applications. Take advantage of this opportunity to purchase the IMA NOVIMAT I /G80/390/R3 edge banding machine. Contact us for further information about this machine. Additional information: • Motor power: 2 x 4.5 kW, 150 Hz • Motor speed: 9,000 rpm • Power supply: 230 V • Heating capacity: 6 x 500 watts • Adjustment range: Vertical approx. 17 mm, horizontal approx. 30 mm • Stroke: max. 8 mm • Roll diameter: max. 850 mm • Edge height: 14 - 65 mm • Workpiece overhang: min. 30 mm + edge thickness, max. 80 mm including edge thickness • Workpiece length: min. 130 mm • Workpiece gap: min. 300 mm • Workpiece distance: min. 990 mm • Workpiece thickness: min. 8 mm, min. 12 mm with tracing wheel, max. 80 mm • Single tracing workpiece overhang: min. 30 mm • Double tracing system workpiece overhang: min. 38 mm for max. 4 profiles, max. 50 mm • Cutterhead diameter: 125 mm • Motor shaft: 30 x 68 mm diameter • Internal thread: M16, depending on motor, left or right • Cutting cross-section motor power: 0.20 kW, 200 Hz, 400 V, 12,000 rpm for max. 195 mm², option: 0.66 kW, expandable up to max. 1,100 mm² • Tool diameter: 160 mm / 48 teeth • Swivel range: 0 and 25 degrees Kwjdpfx Ajx D Nh Aodkew • Workpiece feed speed: max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge protrusion: upper edge, max. 3 mm; lower edge, max. 2 mm for straight edges • Edge material: max. 4 mm for wood and plastic; aluminium, max. 3 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine offers a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control unit, it supports both coil and strip edging materials. Ideal for high-throughput environments requiring flexibility and reliability in edge processing. Contact us for further information about this machine. Additional Equipment • Hot-melt glue application unit: Single roll/strip magazine for coil material up to 3 mm and strips up to 12 mm • End trimming unit: 2 motors, each 660 W, pneumatically tiltable from 0° to +25° Machine Advantages Technical Machine Advantages • Min. infeed width: 244 mm (for longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Additional Information Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough milling unit: 80 kW motor, 6,000 rpm Double milling unit: 2 motors, each 45 kW, 9,000 rpm Flush milling unit: 2 motors, 1,850 W, 12,000 rpm Multi-function unit: NC-controlled with 2 motors, automatic tool change for 4 profiles Kwedpfjx D I D Aex Adksw Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine. Machine Benefits Technical Machine Advantages • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Edge machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: particleboard, MDF • Surface material: direct coating (melamine resin paper), paper, foil, veneer Additional Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Prefabricated edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, 15° chamfer Plastic edge up to 3.0 mm, depending on radius tool Milling strips flush up to 8 mm Machine Constant workpiece projection from chain track: 35 mm + edge thickness Max. cut cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Base height (top edge of chain track): 940 mm Unit side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Jointing unit 08.379 and air nozzle 2 motors, each 4 kW, 9000 rpm Gluing unit 283.1513 Glue reservoir 0.8 l, 60 mm high Suitable for hot-melt or PUR adhesive With individual roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 auxiliary pressure rollers Cutting unit 08.415 Pneumatically swiveling to 0° or 8° 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy milling unit SKF-L 4 motors, 12,000 rpm Kwedsx U U Dtspfx Adkjw Profile length in feed direction: max. approx. 50 mm Workpiece thickness: max. 60 mm Working speed: max. approx. 20 m/min Distance between 2 workpieces: min. approx. 400 mm Profile drawknife 08.519 For post-scraping of an upper and lower milled quarter-circle profile Self-tracing drawknife unit 08.521 For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces Buffing unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Kwodpfowmm Nrsx Adksw

Stanje: rabljeno, številka stroja/vozila: 007842, Delovno območje os X: 5000 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Kwedjyhbiuopfx Adkow Moč glavnega vretena: 18 kW Število krmiljenih osi: 4 osi Maksimalna višina roba: 64 mm Število vrtalnih vreten: 14 Število mest za orodja: 18

Stanje: rabljeno, številka stroja/vozila: 007840, Tip nameščene obrobe: tanka obroba, močna obroba Lepilni sistem: PUR Kjdjyg Eg Ispfx Adksww Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 30 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 8 št.

Stanje: rabljeno, številka stroja/vozila: 007841, Delovno območje os X: 4200 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 18 kW Število krmiljenih osi: 4 osi Kedpfx Aeyg Ef Dedkjww Maksimalna višina roba: 64 mm Število mest za orodje: 18

Stanje: rabljeno, številka stroja/vozila: 007857, Pozicija 1: Horizontalno skladišče IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 2: Krožna žaga za plošče z avtomatskim skladiščem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 3: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 4: Nakladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 5: Razkladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Kjdpfx Adewuuf Deksww Pozicija 6: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 7: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 8: Stroji za rezanje kartona IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 9: Stroji za povezovanje IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ta popolna IMA Combima linija za lepljenje robov z nakladalno postajo je bila izdelana leta 2002. Gre za robusten dvostranski stroj za lepljenje robov s širino obdelave od 235 do 2600 mm in dolžino od 200 do 2600 mm. Deluje s hitrostmi od 10 do 40 m/min, vključuje enoto za spajanje, polavtomatsko lepilno enoto z 6-mestnim magazinom robnega traku ter enote za ravno in profilno obrezovanje. Izkoristite priložnost za nakup te dvostranske lepilke IMA Combima. Za več informacij o stroju nas kontaktirajte. Kedox D Iq Nopfx Adksww Vrste uporabe Lepljenje robov

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Ta 3-osni CNC obdelovalni center za les IMA BIMA CUT 145/330 je bil izdelan leta 2014. Ponaša se z delovnim območjem 3300 mm na osi X in 1450 mm na osi Y ter močjo vretena 18 kW. Stroj je opremljen z orodnim magazinom za do 18 pozicij in vakuumskim vpenjalnim sistemom za varno pritrditev obdelovanca. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju IMA BIMA CUT 145/330, ki ga imamo v prodaji. Kontaktirajte nas za več informacij. Vrste uporabe CNC obdelava lesa Kwsdpsx D Nitofx Adkow

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6200 kg Glavni pogon Območje hitrosti vretena: 8000–24000 Število osi: 3 Pomik Pomik po X-osi: 3000 mm Pomik po Y-osi: 1200 mm Pomik po Z-osi: 100 mm Ta 3-osni IMA BIMA 210 120/300 je bil izdelan leta 2006. Odlikuje ga velik hodi osi (X = 3000 mm, Y = 1200 mm, Z = 100 mm), kar omogoča obdelavo obdelovancev dolžine do 2800 mm in širine do 1200 mm. Glavno vreteno ima moč 7,5 kW z območjem vrtljajev od 8.000 do 24.000 min⁻¹. Teža stroja znaša približno 6200 kg in vključuje CNC krmilje IMA IMATRONIC. Za dodatne informacije o stroju nas kontaktirajte. Uporaba Kodpox D Rt Hefx Adkeww CNC obdelava lesa