Ima Combima nakup rabljenega (132)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Lodpfoyttrxex Adksri Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Lrjdpswukzhjfx Adksi Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110

Stanje: rabljeno, številka stroja/vozila: 005635, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 2: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 4: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 5: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 6: Razkladalec IMA + MEINERT-COMBIMA/II/650/A/R3 Lrjdpjwuudyofx Adkji

Stanje: rabljeno, številka stroja/vozila: 005642, Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Lrodpfx Aewuciwjdkoi

Stanje: rabljeno, številka stroja/vozila: 007514, Pozicija 1: Transfer IMA-COMBIMA SYSTEM I Pozicija 2: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 3: Transfer IMA-COMBIMA SYSTEM I Ljdpswukznofx Adkjri Pozicija 4: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 5: Transfer IMA-COMBIMA SYSTEM I Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 7: Transfer IMA-COMBIMA SYSTEM I Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 9: Transfer IMA-COMBIMA SYSTEM I

Stanje: rabljeno, številka stroja/vozila: 008269, Pozicija 1: Nakladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 2: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 3: Dvostranski robni lepilni stroj IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Ljdpfxex A Hggj Adkjri Pozicija 4: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 5: Razkladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) Lsdpsun N Dlofx Adkori C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips / banding (min/max) mm: max. 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 - 50 Safety and soundproof enclosures Lrsdpfjwz Ic Ajx Adksi FORMATTING UNIT (for each side): Pre-milling cutter 75.186 (1 x 4.4 kW) Planing unit (2 x 6.6 kW) + spare position EDGE BANDING SECTION (for each side): Infrared heating for workpiece edge pre-warming Gluing unit (hot melt adhesive) 04.1570 Pressure zone + edge magazine for rolls (compartment no.) 2 End trim saw 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling unit 08.0555 (1 x 0.66 kW) Multifunction unit (radius milling and profile trimming) MFA 08.342 (2 x 0.66 kW) SERVO Max 20 m/min Profile scraping unit 08.519 Flat scraping unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving/rebating and profiling: 75.30 (2 x 4.4 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Lodpfeunrwnjx Adksri Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: rabljeno, številka stroja/vozila: 006619, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 2: Dvo-kotni profilirni stroj – samostojni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 4: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Lrodpfxsqy Em Ne Adkji Pozicija 5: Transfer IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 6: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 7: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 8: Razkladalec IMA + MEINERT-COMBIMA/I/R75/2050

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine offers a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control unit, it supports both coil and strip edging materials. Ideal for high-throughput environments requiring flexibility and reliability in edge processing. Contact us for further information about this machine. Additional Equipment • Hot-melt glue application unit: Single roll/strip magazine for coil material up to 3 mm and strips up to 12 mm • End trimming unit: 2 motors, each 660 W, pneumatically tiltable from 0° to +25° Machine Advantages Technical Machine Advantages Lsdpfx Adsx D I D Ajksri • Min. infeed width: 244 mm (for longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Additional Information Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough milling unit: 80 kW motor, 6,000 rpm Double milling unit: 2 motors, each 45 kW, 9,000 rpm Flush milling unit: 2 motors, 1,850 W, 12,000 rpm Multi-function unit: NC-controlled with 2 motors, automatic tool change for 4 profiles Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Stanje: rabljeno, številka stroja/vozila: 007840, Tip nameščene obrobe: tanka obroba, močna obroba Lepilni sistem: PUR Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 30 m/min Maksimalna debelina plošče: 60 mm Ledjyg Eg Iepfx Adkeri Delovne enote: 8 št.

Stanje: rabljeno, številka stroja/vozila: 007857, Pozicija 1: Horizontalno skladišče IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 2: Krožna žaga za plošče z avtomatskim skladiščem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 3: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 4: Nakladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Lredpfx Adewuuf Dekoi Pozicija 5: Razkladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 6: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 7: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 8: Stroji za rezanje kartona IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 9: Stroji za povezovanje IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ta popolna IMA Combima linija za lepljenje robov z nakladalno postajo je bila izdelana leta 2002. Gre za robusten dvostranski stroj za lepljenje robov s širino obdelave od 235 do 2600 mm in dolžino od 200 do 2600 mm. Deluje s hitrostmi od 10 do 40 m/min, vključuje enoto za spajanje, polavtomatsko lepilno enoto z 6-mestnim magazinom robnega traku ter enote za ravno in profilno obrezovanje. Izkoristite priložnost za nakup te dvostranske lepilke IMA Combima. Za več informacij o stroju nas kontaktirajte. Lredpfx Aox D Iq Nedkji Vrste uporabe Lepljenje robov

Stanje: rabljeno, številka stroja/vozila: 005854, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroji za lepljenje obrob: stroj 1 in 2 Maks. širina panela: 3300 mm Lrjdpfsv Hinxex Adkji Maks. podajalna hitrost: 30 m/min Delovni agregati, desna stran: 11 kos Delovni agregati, leva stran: 11 kos

Stanje: rabljeno, številka stroja/vozila: 006561, Vrsta nameščenega roba: tanek rob, močan rob, masiven les Sistem lepljenja: EVA Stroj za lepljenje robov: Stroj 1 Maks. širina panela: 2800 mm Delovne enote, desna stran: 11 kos Delovne enote, leva stran: 11 kos Lsdpfjqa Rxaox Adkjri

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor Lsdpfx Aod Nt Rqedkjri - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Lrjdpfx Adsdh Tfgekei Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), DVOJSTRANA FORMATNA I MAŠINA ZA NANOŠENJE IVICA – Prva (1.) mašina u liniji Debljina ivice u roli (min/max) mm 0,3 / 3 Debljina ploče (min/max) mm 8 / 45 (60) Radna širina (min/max) mm 250 / 1300 Upravljanje / softver ICOS Open (Windows baza) Brzina pomeranja (podesiva) m/min 10 - 50 (Master & Slave) Zaštitne i zvučno izolovane kabine FORMATIRANJE (za svaku stranu): Agregat za obradu ivica (2 x Kw 6,6) Maks. 35 m/min Agregat za pripremu ivica 75.186 (1 x Kw 4,4) OBRADA IVICA (za svaku stranu): Lepilni agregat (P.U.R. lepak + pretopni uređaj + Hot Melt lepak) VTG 3-24 + 283.201 + 283.19 + 283.203 Pritisna zona Magacin ivica za rolne (pretinac br. 24) Lrjdpoxggthofx Adkoi Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Agregat sa profilnom vučnom nožem 08.515 Agregat sa ravnom vučnom nožem 08.521 Agregat za poliranje 08.617-2 (2 x Kw 0,18) 3 x standardni frézerski agregati za nutovanje/pravljenje falcova (2 levo + 1 desno) 08.190 (Kw 4,5x3) 90°/180°/270°

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) Ledpfjcr T N Dox Adkjri EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows based) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (panels fall directly onto the motorized caterpillar chains) Cam distance (mm): 270 FORMAT PROCESSING (for each side): Spraying unit (for liquid nonstick agent) Pre-milling cutter 75.186 (1 x 4.4 kW) Lodpfx Asum Untjdkjri Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), KOMPLETNE DVOSTRANE MAŠINE ZA FORMATIRANJE I NANOŠENJE KANT TRAKE, sačinjene od: OZ2050A) Stanica za ubacivanje 'MEINERT' model P 415 D/B - L, dvostruka stanica za prihvat. Sa centralno motorizovanim rolno-stolom. Sa dve motorizovane rolne postavljene na podu za dopremu složenih ploča do stanice za ubacivanje. OZ2050B) Prva dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 440 / A / R3 OZ2050C) Povezani rolni sto 'IMA' model IDK L/Q sa obrtanjem (od uzdužnog ka poprečnom smeru) Lrjdpfxoxftt Eo Adksi OZ2050D) Druga dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 590 / B / R3 OZ2050E) Povezani rolni sto 'IMA' model IDK Q/L sa uređajem za obrtanje (od poprečnog ka uzdužnom smeru) sa dvostrukim konus sistemom OZ2050F) Dvostrana stanica za skidanje sa palete 'MEINERT' model P 415 D/S - L, kompletna sa centralno motorizovanom rolnom trakom. Sa dve motorizovane rolne trake.

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/Software: ICOS Open (Windows based) Lredpfx Aexggzlodkji Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.4 / 3 Edge thickness for strip veneer (max) mm: 1.3 Panel thickness (min/max) mm: 10 / 45 Working width (min/max) mm: approx. 244 / 2300 Control/Software: ICOS Open Lredpfxefi Tkvs Adkei Feed speed (m/min): 8 - 40 No transmission bar (Master & Slave systems) Safety and noise protection enclosure Retractable alignment stops, distance (mm): 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. adhesive + premelter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End-trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius milling and profile trimming) MFA 08.342 (0.66 kW x 2), max 25 m/min Profile trimming unit (copying) 08.465 (0.18 kW x 4), max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free bay

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINES – First (1st) machine in line Edge thickness from coil (min/max) mm Edge thickness in strips (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/software ICOS open Feed speed (adjustable) m/min 9 - 45 No transfer bar (master & slave systems) Pressure belt driven by V-belt FORMATTING UNIT (for each side): Jointing/milling unit 75.30 (kW 6.6 x 1) Lrsdpfx Adefi Tkgeksi EDGE-BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1569 + 283.205 Pressure rollers (turret) for straight and softforming edges mm 1,050 Edge magazine for coils (number of slots) 6 End trimming unit 08.42 (kW 0.2 x 2) 40 m/min Pre-milling unit 08.055 (kW 0.66 x 2) 0°-30° Milling unit 08.0582 (kW 0.66 x 2) 0°-30° Scraper unit 08.50 Buffing unit 08.617-2 (kW 0.18 x 2)